- Top Seller
Intex C330 Filter Single-Phase
Flow rate (max): 1250lt/h, Connection Port: 32mm
from29,90 € at 5 stores
Intex Αντλία Filter Single-Phase 0.15hp
Flow rate (max): 3595lt/h, Connection Port: 32mm
from55,60 € at 2 stores
Intex Krystal Pool Water Filter Single-Phase
Flow rate (max): 7900lt/h, Connection Port: 38mm
Filters
Clear- Filter: The classic pumps that recirculate the water through the filter (sand, glass, or paper) for cleaning the pool.
- Hydromassage: Pumps that circulate water in the spa or jacuzzi system, sending it under pressure to the jets (special nozzles installed on the walls or bottom of the pool) to create the hydromassage effect.
- Counter Current Swimming: They create a very strong water current so you can swim steadily in the same spot.
- 12V: They operate at low voltage for safety. Mainly suitable for spas (jacuzzis) or very small pools (up to 15 m³)
- Single-phase: They operate with standard household electricity (230V). They are suitable for residential pools
- Three-phase: They operate on three-phase power (400V) and are intended for large pools or commercial installations. They are more powerful, efficient for continuous use, and durable, but require a three-phase supply, which is not usually available in homes
- Indicates the power of the motor. If the pump is installed far from the pool (more than 10m) or in a basement, the water flow is strained. In this case, choose a pump with more horsepower (HP) for proper cleaning.
- Constant Speed: The classic and most economical choice. They always operate at 100% of their power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
- Dual Speed: They have two preset operating speeds. They allow you to use the low speed for economical daily filtration and the high speed only when performing demanding tasks.
- Variable Speed (Inverter): The most advanced solution for your pool. They allow you to adjust the speed exactly where needed, ensuring energy savings (up to 80%), quiet operation, and a longer lifespan.
- Suitable for Salt Water: Essential if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from salt water.
- Self-Priming: Allows the pump to draw water from the pool by itself, even if there is air in the pipes. This function is essential if the pump is installed higher than the water level of the pool.
- Low Noise (< 60dB): They operate quietly (like a modern dishwasher), without creating annoying noise while you relax by the pool.