Total TT5006-2 Electric Paint Spray Gun 500W 0.8lt
Spray Type: HVLP, Nozzle Diameter: 2.5mm
from42,70 € at 16 stores
Total TSGLI2004 Electric Paint Spray Gun 20V Solo 1L Container
Nozzle Diameter: 2.5mm
from32,19 € at 9 stores
Total TT5006 Electric Paint Spray Gun 500W 0.8lt
Spray Type: HVLP, Nozzle Diameter: 2.5mm
from38,63 € at 15 stores
Filters
Clear- Airless: It sprays the paint at very high pressure, without the use of air.
- HVLP: HVLP (High Volume Low Pressure) technology uses a high volume of air at low pressure for more controlled and even spraying.
- A smaller nozzle diameter provides a finer and more even finish, ideal for varnishes and detailed work, while a larger diameter allows for faster coverage and is suitable for thicker paints and larger surfaces.
- Precision & Detail: With a flow rate of 0.2–0.6 L/min. Ideal for furniture, window frames, railings, and small objects. Offers maximum control and minimal paint overspray.
- General Purpose & Interior Walls: 0.7–1.8 L/min. For painting rooms, interior walls, and fences. A balance of speed and control.
- Quick Coverage of Large Areas: 1.9–3.5 L/min. For façades, large walls, and outdoor areas. Enables very fast painting.
- Professional / Industrial: Over 3.5 L/min. For large-scale contract applications, buildings, and heavy-duty work with Airless systems.
- Precision & Detail 0
- General Purpose & Interior Walls 0
- Quick Coverage of Large Areas 0
- Professional / Industrial 0
- Varnishes / Wood Finishes (Wood): Up to 50 DIN/s. No thinning required. These are very low-viscosity materials. They can be sprayed even with the smallest, most affordable spray guns (with 1.0–1.5 mm nozzles).
- Plastic / Acrylic (Walls): Over 90 DIN-s (up to 160 DIN-s). Thin by 5–10% (for spray guns rated at 90–100 DIN-s) or use undiluted (for powerful spray guns rated at 110–160 DIN-s). Requires a large nozzle (2.2–2.6 mm).
- Enamel Paints / Oil-Based Paints (Metal): 51–90 DIN/s. Minimal thinning (0–5%). Medium-viscosity materials. Require a spray gun rated for at least 60 DIN/s and a 1.5–2.0 mm nozzle for a smooth finish.