Skroutz.mt

Quadro Quadro CUT-60 Plasma Cutting Inverter 60A
Welding Machines

Quadro Quadro CUT-60 Plasma Cutting Inverter 60A

The Quadro CUT-60 cutting machine uses inverter technology and allows the cutting current to be adjusted from 0 to 60 A. It cuts stainless and carbon steel, aluminium, copper and composite sheets,...

The Quadro CUT-60 cutting machine uses inverter technology and allows the cutting current to be adjusted from 0 to 60 A. It cuts stainless and carbon steel, aluminium, copper and composite sheets, with a cutting thickness of 1 to 18 mm. It has a three-phase 380 V power supply.

  • Type: Plasma cutter
  • Technology: Inverter
  • Cutting current: 0–60 A
  • Duty cycle: 60%...
See full description See full description

Top specs

  • Welding Current

    60

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    380

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    7.9

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
899 64 €
Delivery by Thu, 19 Nov
59,00 €   shipping cost
Sent from Greece
From Shopaholic
Greece
5 pieces
See Tools on the page of Shopaholic

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Product report

Description

Description

The Quadro CUT-60 cutting machine uses inverter technology and allows the cutting current to be adjusted from 0 to 60 A. It cuts stainless and carbon steel, aluminium, copper and composite sheets, with a cutting thickness of 1 to 18 mm. It has a three-phase 380 V power supply.

  • Type: Plasma cutter
  • Technology: Inverter
  • Cutting current: 0–60 A
  • Duty cycle: 60% at 60 A
  • Supply voltage: 380 V, three-phase
  • Frequency: 50 Hz
  • Power: 7.9 kVA
  • No-load voltage: 295 V
  • Output voltage: 98.4–104 V
  • Cutting thickness: 1–18 mm
  • Weight: 17.7 kg
  • Protection class: F
  • Dimensions: 545 × 210 × 375 mm
  • Package contents: Cutting torch with 5 m cable, ground clamp with cable, plasma gas regulator, eye protection mask, hose and operating manual

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
60 A

Welding Current (max): 60


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
380 V

Supply Voltage: 380


It is the supply voltage that the machine requires from the electrical grid.
Power
7.9 kVA

Power: 7.9


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
17700 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

1.0
1
1.0
Review this product
  1. 5 stars
    0
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • kokkinidisdim
    1
    kokkinidisdim

    Three-phase machine full of problems, burned circuit board once, cables are a mess, wires are cut with the slightest touch, another crack on the board after a few uses, diodes burned on the board again. The build quality is terrible, the only good thing is that the person who sold it to us fixed it at his own expense. The only good thing is that the board is so simple that you can fix it yourself. I do not recommend it.

    Translated from Greek ·
    • Moderate difficulty to use
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Welding cable length
    • Value for money
    Did you find this review helpful?
  • kokkinidisdim
    1
    kokkinidisdim

    Three-phase machine full of problems, burned circuit board once, cables are a mess, wires are cut with the slightest touch, another crack on the board after a few uses, diodes burned on the board again. The build quality is terrible, the only good thing is that the person who sold it to us fixed it at his own expense. The only good thing is that the board is so simple that you can fix it yourself. I do not recommend it.

    Translated from Greek ·
    0
  • See all

Description & Specifications

The Quadro CUT-60 cutting machine uses inverter technology and allows the cutting current to be adjusted from 0 to 60 A. It cuts stainless and carbon steel, aluminium, copper and composite sheets, with a cutting thickness of 1 to 18 mm. It has a three-phase 380 V power supply.

  • Type: Plasma cutter
  • Technology: Inverter
  • Cutting current: 0–60 A
  • Duty cycle: 60% at 60 A
  • Supply voltage: 380 V, three-phase
  • Frequency: 50 Hz
  • Power: 7.9 kVA
  • No-load voltage: 295 V
  • Output voltage: 98.4–104 V
  • Cutting thickness: 1–18 mm
  • Weight: 17.7 kg
  • Protection class: F
  • Dimensions: 545 × 210 × 375 mm
  • Package contents: Cutting torch with 5 m cable, ground clamp with cable, plasma gas regulator, eye protection mask, hose and operating manual

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
60 A

Welding Current (max): 60


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
380 V

Supply Voltage: 380


It is the supply voltage that the machine requires from the electrical grid.
Power
7.9 kVA

Power: 7.9


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
17700 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

1.0
1
1.0
Review this product
  1. 5 stars
    0
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • kokkinidisdim
    1
    kokkinidisdim

    Three-phase machine full of problems, burned circuit board once, cables are a mess, wires are cut with the slightest touch, another crack on the board after a few uses, diodes burned on the board again. The build quality is terrible, the only good thing is that the person who sold it to us fixed it at his own expense. The only good thing is that the board is so simple that you can fix it yourself. I do not recommend it.

    Translated from Greek ·
    • Moderate difficulty to use
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Welding cable length
    • Value for money
    Did you find this review helpful?
  • kokkinidisdim
    1
    kokkinidisdim

    Three-phase machine full of problems, burned circuit board once, cables are a mess, wires are cut with the slightest touch, another crack on the board after a few uses, diodes burned on the board again. The build quality is terrible, the only good thing is that the person who sold it to us fixed it at his own expense. The only good thing is that the board is so simple that you can fix it yourself. I do not recommend it.

    Translated from Greek ·
    0
  • See all
899,64 €
59,00 €   shipping cost