Skroutz.mt

Bosch GSS 18V-10 Professional Solo Battery Powered Pulse Sander 18V with Speed Control and with Suction System 06019D0202
Sanders

Bosch GSS 18V-10 Professional Solo Battery Powered Pulse Sander 18V with Speed Control and with Suction System 06019D0202

GSS 18 V-10 Cordless Orbital Sander (Solo) + L-BOXX

Body Only. Battery and charger not included.

Specifications

  • No-load oscillation rate: 22,000 min-1
  • Oscillation diameter: 1.6 mm
  • Weight with...

GSS 18 V-10 Cordless Orbital Sander (Solo) + L-BOXX

Body Only. Battery and charger not included.

Specifications

  • No-load oscillation rate: 22,000 min-1
  • Oscillation diameter: 1.6 mm
  • Weight with battery: 1.7 kg
  • Length: 200 mm
  • Width: 113 mm
  • Height: 140 mm
  • Sanding plate width: 113 mm
  • Sanding plate length: 101 mm
  • Sanding surface: 114 qcm
  • Clamping sanding sheet...
See full description See full description
  • Number of Batteries 0

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    1.6

    Very fine sanding, sensitive materials, finishing.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • Weight (Net) 1700 gr
  • See all

Kit contents

  1. Solo

    from 257,32 €

  2. Solo with Hard Case

    from 210,00 €

Carrying case

  1. Hard Case

    from 210,00 €

  2. Without

    from 257,32 €

210 00 €
Delivery by Fri, 10 Jul
14,00 €   shipping cost
Sent from Greece
From Xristou 5.0 (40)
5.0 (40 reviews)
Greece
1 piece
See Power Tools on the page of Xristou
Review the product
Product report

Description

Description

GSS 18 V-10 Cordless Orbital Sander (Solo) + L-BOXX

Body Only. Battery and charger not included.

Specifications

  • No-load oscillation rate: 22,000 min-1
  • Oscillation diameter: 1.6 mm
  • Weight with battery: 1.7 kg
  • Length: 200 mm
  • Width: 113 mm
  • Height: 140 mm
  • Sanding plate width: 113 mm
  • Sanding plate length: 101 mm
  • Sanding surface: 114 qcm
  • Clamping sanding sheet width: 115 mm
  • Clamping sanding sheet length: 140 mm
  • Self-adhesive sanding sheet width: 115 mm
  • Self-adhesive sanding sheet length: 107 mm

Included

  • 1 sanding sheet C470, Best for Wood + Paint
  • 100 x 150 mm (Delta) base plate
  • 113 x 101 mm base plate
  • 80 x 130 mm base plate
  • L-BOXX 136
  • L-BOXX insert
  • Punch tool
  • Screwdriver
  • Microfilter box

Description

The first one-handed cordless orbital sander from Bosch. The compact cordless orbital sander - fits into every corner. Bosch microfilter system for efficient dust extraction. Ergonomic design with anti-slip grip surfaces for various gripping positions. Perfect paper retention without wobbling and tearing. The sanding plate of the GSS 18V-10 can accommodate both hook-and-loop and clamping sandpaper. Long lifespan thanks to sealed bearings and robust construction.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Oscillation Range
1.6 mm

Oscillation Range: 1.6

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
1700 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
0
Volt
18 V
Τύπος Συμβατής Μπαταρίας
Bosch GBA 18V

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
11000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
80 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Sandpaper Dimensions
140x115 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Hard Case
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

GSS 18 V-10 Cordless Orbital Sander (Solo) + L-BOXX

Body Only. Battery and charger not included.

Specifications

  • No-load oscillation rate: 22,000 min-1
  • Oscillation diameter: 1.6 mm
  • Weight with battery: 1.7 kg
  • Length: 200 mm
  • Width: 113 mm
  • Height: 140 mm
  • Sanding plate width: 113 mm
  • Sanding plate length: 101 mm
  • Sanding surface: 114 qcm
  • Clamping sanding sheet width: 115 mm
  • Clamping sanding sheet length: 140 mm
  • Self-adhesive sanding sheet width: 115 mm
  • Self-adhesive sanding sheet length: 107 mm

Included

  • 1 sanding sheet C470, Best for Wood + Paint
  • 100 x 150 mm (Delta) base plate
  • 113 x 101 mm base plate
  • 80 x 130 mm base plate
  • L-BOXX 136
  • L-BOXX insert
  • Punch tool
  • Screwdriver
  • Microfilter box

Description

The first one-handed cordless orbital sander from Bosch. The compact cordless orbital sander - fits into every corner. Bosch microfilter system for efficient dust extraction. Ergonomic design with anti-slip grip surfaces for various gripping positions. Perfect paper retention without wobbling and tearing. The sanding plate of the GSS 18V-10 can accommodate both hook-and-loop and clamping sandpaper. Long lifespan thanks to sealed bearings and robust construction.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Oscillation Range
1.6 mm

Oscillation Range: 1.6

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
1700 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
0
Volt
18 V
Τύπος Συμβατής Μπαταρίας
Bosch GBA 18V

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
11000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
80 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Sandpaper Dimensions
140x115 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Hard Case
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

210,00 €
14,00 €   shipping cost