Skroutz.mt

Ferm HDM1037 Impact Demolition Hammer Electric 1500W with Chuck SDS Plus HDM1037
Rotary Hammers

Ferm HDM1037 Impact Demolition Hammer Electric 1500W with Chuck SDS Plus HDM1037

HDM1037 Rotary Hammer 1500W

  • Features:
  • SDS-plus chuck
  • 4 operating modes: Drilling, hammer drilling, chiseling, and chiseling with free rotation
  • 3m rubber cable
  • Specifications:
  • Nominal power: 1,500...

HDM1037 Rotary Hammer 1500W

  • Features:
  • SDS-plus chuck
  • 4 operating modes: Drilling, hammer drilling, chiseling, and chiseling with free rotation
  • 3m rubber cable
  • Specifications:
  • Nominal power: 1,500 Watt
  • Frequency: 230V ~, 50Hz
  • No-load speed: 0 - 950 /min
  • No-load impact rate: 0 - 4,400 /min
  • Impact energy: 6.0 Joule
  • Maximum drilling in: Concrete up to 32mm,...
See full description See full description
  • Item Excavator

  • Impact Energy

    The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

    2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.

    6

    Tools with at least 5 Joules are recommended for heavy duty work and professional use.

  • Power

    Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

    2. Impact Energy is another characteristic that shows the "power" of the tool.

    1500

    Machines ranging from 650 to 1500 watts will handle most household tasks. More watts make it easier to work on harder surfaces.

  • Socket

    SDS - SDS Plus (TE-C)

    SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.

  • Speed Setting

    1

    Ability to control the rotation speed, either through the trigger or via a speed selector.

  • Maximum Number of Impacts

    The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

    2.

    Note that the Impact Energy is also important for performance, indicating the force of each strike.
  • See all
135 00 €
Delivery by Fri, 07 Aug
20,00 €   shipping cost
Sent from Greece
From Paisidis
Greece
1 piece
See Power Tools on the page of Paisidis
Review the product
Product report

Description

Description

HDM1037 Rotary Hammer 1500W

  • Features:
  • SDS-plus chuck
  • 4 operating modes: Drilling, hammer drilling, chiseling, and chiseling with free rotation
  • 3m rubber cable
  • Specifications:
  • Nominal power: 1,500 Watt
  • Frequency: 230V ~, 50Hz
  • No-load speed: 0 - 950 /min
  • No-load impact rate: 0 - 4,400 /min
  • Impact energy: 6.0 Joule
  • Maximum drilling in: Concrete up to 32mm, Wood up to 42mm, Steel up to 13mm
  • Weight: 5.20 kg
  • Includes:
  • Side handle
  • Protective cover
  • Lubrication tube
  • Depth guide
  • 3 SDS concrete drills (8 mm, 10 mm, 12 mm)
  • Chisel (250 mm)
  • Point chisel (250 mm)
  • Grease cover
  • Allen key
  • Storage case

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Power Source
Electric
Type
Excavator

Battery Specifications

Lithium
No

Current Specifications

Power
1500 W

Power: 1500

Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

2. Impact Energy is another characteristic that shows the "power" of the tool.


Machines ranging from 650 to 1500 watts will handle most household tasks. More watts make it easier to work on harder surfaces.
Cable Length
3 m

Drilling Features

Steel Ø
13 mm

Steel Ø

The maximum possible drilling diameter in steel.
Wood Ø
42 mm

Wood Ø

The maximum possible drilling diameter in wood.
Cement Ø
32 mm

Cement Ø

The maximum possible drilling diameter in concrete.

Features

Maximum Motor Speed
950 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
6 Joule

Impact Energy: 6

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


Tools with at least 5 Joules are recommended for heavy duty work and professional use.
Maximum Number of Impacts
4400 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
No
Pneumatic
No
Speed Adjustable
Yes

Speed Adjustable


Ability to control the rotation speed, either through the trigger or via a speed selector.
Impact
Yes
Rotary
Yes
Screwing/Unscrewing
No

Additional Features

Carrying Case
Hard Case
Handle included
Yes
Integrated Light
No
Guide
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

HDM1037 Rotary Hammer 1500W

  • Features:
  • SDS-plus chuck
  • 4 operating modes: Drilling, hammer drilling, chiseling, and chiseling with free rotation
  • 3m rubber cable
  • Specifications:
  • Nominal power: 1,500 Watt
  • Frequency: 230V ~, 50Hz
  • No-load speed: 0 - 950 /min
  • No-load impact rate: 0 - 4,400 /min
  • Impact energy: 6.0 Joule
  • Maximum drilling in: Concrete up to 32mm, Wood up to 42mm, Steel up to 13mm
  • Weight: 5.20 kg
  • Includes:
  • Side handle
  • Protective cover
  • Lubrication tube
  • Depth guide
  • 3 SDS concrete drills (8 mm, 10 mm, 12 mm)
  • Chisel (250 mm)
  • Point chisel (250 mm)
  • Grease cover
  • Allen key
  • Storage case

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Power Source
Electric
Type
Excavator

Battery Specifications

Lithium
No

Current Specifications

Power
1500 W

Power: 1500

Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

2. Impact Energy is another characteristic that shows the "power" of the tool.


Machines ranging from 650 to 1500 watts will handle most household tasks. More watts make it easier to work on harder surfaces.
Cable Length
3 m

Drilling Features

Steel Ø
13 mm

Steel Ø

The maximum possible drilling diameter in steel.
Wood Ø
42 mm

Wood Ø

The maximum possible drilling diameter in wood.
Cement Ø
32 mm

Cement Ø

The maximum possible drilling diameter in concrete.

Features

Maximum Motor Speed
950 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
6 Joule

Impact Energy: 6

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


Tools with at least 5 Joules are recommended for heavy duty work and professional use.
Maximum Number of Impacts
4400 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
No
Pneumatic
No
Speed Adjustable
Yes

Speed Adjustable


Ability to control the rotation speed, either through the trigger or via a speed selector.
Impact
Yes
Rotary
Yes
Screwing/Unscrewing
No

Additional Features

Carrying Case
Hard Case
Handle included
Yes
Integrated Light
No
Guide
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

135,00 €
20,00 €   shipping cost