Skroutz.mt

Makita DDA350ZJ Angle Percussive Power Drill Driver
Power Drill Drivers & Screwdrivers

Makita DDA350ZJ Angle Percussive Power Drill Driver

The Makita DDA350ZJ is an 18 V cordless right-angle impact drill driver with a head height of 66 mm. Its dimensions are 314 79 115 mm. It features an electric brake, an ergonomic grip, a trigger...

The Makita DDA350ZJ is an 18 V cordless right-angle impact drill driver with a head height of 66 mm. Its dimensions are 314 79 115 mm. It features an electric brake, an ergonomic grip, a trigger switch and a reverse switch. The side handle can be attached on either side.

The tool comes with a Makpac case, but without a battery or charger.

  • Type:...
See full description See full description

Top specs

  • Power Supply Electric

  • Speed Setting

    Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)

  • Voltage

    It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

  • Maximum Motor Speed

    The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.

  • Chuck Diameter

    The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.

  • Impact

    The impact function provides high power to easily and quickly complete even the most demanding tasks.
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The Makita DDA350ZJ is an 18 V cordless right-angle impact drill driver with a head height of 66 mm. Its dimensions are 314 × 79 × 115 mm. It features an electric brake, an ergonomic grip, a trigger switch and a reverse switch. The side handle can be attached on either side.

The tool comes with a Makpac case, but without a battery or charger.

  • Type: Right-angle impact drill driver
  • Power source: Cordless
  • Voltage: 18 V
  • Maximum torque: 13.5 Nm
  • Maximum speed: Up to 1,800 rpm
  • Impact function: Yes
  • Chuck / holder: 1.5–10 mm chuck
  • Drilling capacity: Up to 25 mm in wood and 10 mm in metal
  • Work light: Integrated
  • Weight: 1,800 g without battery
  • Carrying case: Makpac case

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Electric
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

Battery Features

Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

Drilling Abilities

Steel Ø
10 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.

Features & Functions

Maximum Motor Speed
1800 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
13.5 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
-
Torque Adjustment
-

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
Yes

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
Yes

Angle


Features a head that is positioned at an angle (usually 90 degrees) relative to the body of the tool, thus allowing access to tight or hard-to-reach angles.
Interchangeable Head
No
Reception
-
Maximum Chuck Diameter
10 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
1800 gr

Extra Features

Carrying Case
-
Handle Included
No
Integrated Light
Yes
With Charger
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Makita DDA350ZJ is an 18 V cordless right-angle impact drill driver with a head height of 66 mm. Its dimensions are 314 × 79 × 115 mm. It features an electric brake, an ergonomic grip, a trigger switch and a reverse switch. The side handle can be attached on either side.

The tool comes with a Makpac case, but without a battery or charger.

  • Type: Right-angle impact drill driver
  • Power source: Cordless
  • Voltage: 18 V
  • Maximum torque: 13.5 Nm
  • Maximum speed: Up to 1,800 rpm
  • Impact function: Yes
  • Chuck / holder: 1.5–10 mm chuck
  • Drilling capacity: Up to 25 mm in wood and 10 mm in metal
  • Work light: Integrated
  • Weight: 1,800 g without battery
  • Carrying case: Makpac case

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Electric
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

Battery Features

Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

Drilling Abilities

Steel Ø
10 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.

Features & Functions

Maximum Motor Speed
1800 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
13.5 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
-
Torque Adjustment
-

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
Yes

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
Yes

Angle


Features a head that is positioned at an angle (usually 90 degrees) relative to the body of the tool, thus allowing access to tight or hard-to-reach angles.
Interchangeable Head
No
Reception
-
Maximum Chuck Diameter
10 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
1800 gr

Extra Features

Carrying Case
-
Handle Included
No
Integrated Light
Yes
With Charger
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

235,59 €
14,00 €   shipping cost