Skroutz.mt

Rupes LS71T Electric Eccentric Sander 200W with Suction System LS71T
Sanders

Rupes LS71T Electric Eccentric Sander 200W with Suction System LS71T

LS 71T Triangular Palm Sander

Specifications

  • Power: 200 Watt
  • Speed: 13,000 R.P.M
  • Eccentric: 2.0mm
  • Abrasive retention with Velcro
  • Plate Dimensions: Delta
  • Weight: 1.2 Kg

Description

Triangular...

LS 71T Triangular Palm Sander

Specifications

  • Power: 200 Watt
  • Speed: 13,000 R.P.M
  • Eccentric: 2.0mm
  • Abrasive retention with Velcro
  • Plate Dimensions: Delta
  • Weight: 1.2 Kg

Description

Triangular electric palm sander for hard-to-reach areas from RUPES. Triangular hard plate with holes and autonomous dust extraction for dust-free sanding. Switch protection with...

See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    2

    Very fine sanding, sensitive materials, finishing

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    2

    Very fine sanding, sensitive materials, finishing.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • Weight (Net) 1150 gr
  • See all
Review the product
Product report

Description

Description

LS 71T Triangular Palm Sander

Specifications

  • Power: 200 Watt
  • Speed: 13,000 R.P.M
  • Eccentric: 2.0mm
  • Abrasive retention with Velcro
  • Plate Dimensions: Delta
  • Weight: 1.2 Kg

Description

Triangular electric palm sander for hard-to-reach areas from RUPES. Triangular hard plate with holes and autonomous dust extraction for dust-free sanding. Switch protection with rubber cover. Anti-vibration materials for zero vibration and extended work hours.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Oscillation Range
2 mm

Oscillation Range: 2

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
1150 gr
Palm Sander
Yes

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
200 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
13000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

LS 71T Triangular Palm Sander

Specifications

  • Power: 200 Watt
  • Speed: 13,000 R.P.M
  • Eccentric: 2.0mm
  • Abrasive retention with Velcro
  • Plate Dimensions: Delta
  • Weight: 1.2 Kg

Description

Triangular electric palm sander for hard-to-reach areas from RUPES. Triangular hard plate with holes and autonomous dust extraction for dust-free sanding. Switch protection with rubber cover. Anti-vibration materials for zero vibration and extended work hours.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Oscillation Range
2 mm

Oscillation Range: 2

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
1150 gr
Palm Sander
Yes

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
200 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
13000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

250,00 €
14,00 €   shipping cost