Solar Charge Controllers

PWM Solar Charge Controller LD25 24V / 30A

The LD25 charge controller manages the charging of photovoltaic systems using PWM technology and automatically detects whether the system voltage is 12 V or 24 V. The LCD displays the charging...

The LD25 charge controller manages the charging of photovoltaic systems using PWM technology and automatically detects whether the system voltage is 12 V or 24 V. The LCD displays the charging current, discharge current, and battery voltage every 5 seconds. It allows you to adjust charging and discharging parameters, as well as load functions.

  • Type: PWM
  • ...
See full description See full description
30 00 €
Delivery by Fri, 20 Nov
14,00 €   shipping cost
Sent from Greece
From Tapandaola 4.8 (7)

Learn more about invoicing

Description

Description

The LD25 charge controller manages the charging of photovoltaic systems using PWM technology and automatically detects whether the system voltage is 12 V or 24 V. The LCD displays the charging current, discharge current, and battery voltage every 5 seconds. It allows you to adjust charging and discharging parameters, as well as load functions.

  • Type: PWM
  • Rated operating voltage: 12 V / 24 V
  • Rated operating current: 30 A
  • Solar panel voltage: < 50 V
  • Float charging voltage: 13.7 V / 27.4 V, adjustable
  • Low-voltage protection: 10.7 V / 21.4 V, adjustable
  • Low-voltage recovery: 12.6 V / 25.2 V, adjustable
  • Load loss: < 30 mA
  • Loop voltage drop: < 200 mA
  • Temperature compensation: -4 mV/Cell/℃
  • Maximum cable cross-section: 25 mm²
  • Operating temperature: -20 °C to 50 °C
  • Storage temperature: -30 °C to 70 °C
  • Operating humidity: ≤ 90%, non-condensing
  • Dimensions: 190 × 108 × 41.5 mm
  • Weight: 520 g
  • Display: LCD
  • Protections: Battery reverse polarity, battery reverse discharge, low battery voltage, overload, and short circuit
  • Restart after overload: Automatic, with a delay
  • Certifications: ISO 9001:2008, CE

Manufacturer

OEM
See full description

Specifications

Specifications

Type
PWM
Maximum Voltage
24 V
Maximum Short Circuit Current
30 A

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The LD25 charge controller manages the charging of photovoltaic systems using PWM technology and automatically detects whether the system voltage is 12 V or 24 V. The LCD displays the charging current, discharge current, and battery voltage every 5 seconds. It allows you to adjust charging and discharging parameters, as well as load functions.

  • Type: PWM
  • Rated operating voltage: 12 V / 24 V
  • Rated operating current: 30 A
  • Solar panel voltage: < 50 V
  • Float charging voltage: 13.7 V / 27.4 V, adjustable
  • Low-voltage protection: 10.7 V / 21.4 V, adjustable
  • Low-voltage recovery: 12.6 V / 25.2 V, adjustable
  • Load loss: < 30 mA
  • Loop voltage drop: < 200 mA
  • Temperature compensation: -4 mV/Cell/℃
  • Maximum cable cross-section: 25 mm²
  • Operating temperature: -20 °C to 50 °C
  • Storage temperature: -30 °C to 70 °C
  • Operating humidity: ≤ 90%, non-condensing
  • Dimensions: 190 × 108 × 41.5 mm
  • Weight: 520 g
  • Display: LCD
  • Protections: Battery reverse polarity, battery reverse discharge, low battery voltage, overload, and short circuit
  • Restart after overload: Automatic, with a delay
  • Certifications: ISO 9001:2008, CE

Manufacturer

OEM
Type
PWM
Maximum Voltage
24 V
Maximum Short Circuit Current
30 A

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

30,00 €
14,00 €   shipping cost