With the mention of 5 speeds, I expected it to have stronger power regarding the absorption of steam during cooking, unfortunately disappointment, the tiles are running with water from the condensation of steam that is not being absorbed.

I got it as a replacement for the CNL 2002 so I wouldn't have to do any renovations, but some modifications were needed. I really like the quality. The inox is very good and doesn't leave fingerprints. Very good suction and the noise is not so annoying. So far, very satisfied.

The previous one I had, the 6415, after 4 years, started making a lot of noise. Some moving parts were touching each other. The Plus is currently more powerful and has 5 speed settings compared to the 3 of the older one. Time will tell.

Nice design. Good build quality. Efficient. Not particularly noisy. Very good ergonomics. Honest for its price

After 2 years of use, the only negative I can find is its filters. If they are removed for cleaning, they are troublesome to put back correctly.

The extractor hood is very good, I am very satisfied, I have had it for almost a year and... maybe the only drawback is that it makes a little more noise but whatever extractor hood it is, it does its job very well!!!

It has a constant buzz that doesn't change with the speed you choose. At the highest level, it's like a tornado. More noise even than a 20-year-old free-standing extractor hood I had. Simply unacceptable. It's just a box with a motor in the middle that you can't stop the noise with any patent.

This specific extractor fan, although efficient and relatively cheap, is still very noisy even at the lowest speed. Therefore, it is quite tiring during operation. Its lighting is quite good.

I have had it exactly for a year.
For some reason, one of the two covers keeps falling off constantly, without me doing anything or there being any damage. Almost every other time I use it, I have to remove the outer cover to reattach the inner one that has fallen off, quite annoying.
When I boil pasta, for example, which produces a lot of steam, it doesn't absorb well and after a while, all the tiles around it start sweating. Lately, a couple of times, as soon as I finish cooking and close it, liquid steam has been dripping in the kitchen - as soon as the fan stops, that is, and we're not talking about just a few drops, it was like someone pouring water from a glass.
It makes quite a bit of noise.
For its price, I hoped it would be better even though I had seen the negative reviews here. Either pay less and get something that will probably do the same job or pay more and get something truly efficient.

Definitely better than the previous model, which had worse absorption and broke in 2 years. And compared to the others I found in these dimensions, it was the best choice. I hope this one doesn't break quickly either

From the first day we bought it, it has the following problem. It can't work for more than 5 minutes on any gear except the first. As soon as you increase the speed, it automatically drops back to first gear. It's really annoying. There is no solution. We have to replace it.

Bought it in 2020 but first used it in September 2022.
The first observation is that the grates keep falling off all the time when you pull the hood.
Secondly, it doesn't suck well, resulting in steam filling up and dripping onto the food and the countertop below.
Acceptable noise levels even at maximum intensity.
After 4 months of use, on 3/23, the motor burned out. Appointment with the company for official service only on weekdays and only in the morning. The person who came only asked me if it's under warranty, and as soon as I told him it has expired, he said it's not worth dealing with. 2 minutes of presence in the space cost 40€. He wanted 120€ to change the motor and another 50€ for the labor, plus the 40€ for the appointment. But otherwise, he tells me to buy a new one, it's just 4 screws and a little cable to connect, but he wanted 50€ for that. Unacceptable.

The extractor is very good. With six intensity levels, it truly has amazing performance. Good construction, with strong lighting. It is, of course, noisy, but personally, for the money and the space I have, this choice was a one-way street. And the previous one I had was TEKA and I replaced it due to an accident. No problem then, and they are worth it.

Where good extractor fan. Powerful LED light and very powerful it seems. The motor makes a little more noise in the large scale but it's okay, it's tolerable and in this price range.

The back rack does not pull the air. Pot with boiling water on the big staircase, the steam escapes left and right and the tiles sweat...
In the front eyes somewhat better.
On the big stairs, it makes noise.
Overall, it is for light use.
(Update) After a few cooking sessions, it doesn't pull at all. Water drips from everywhere. From above, from the tiles, I'm trying to find a way to turn it back...

In the tenth month, the motor started making noise and the dealership does not recognize the warranty because they say that although there is a 12mm air outlet pipe, it ends up being 10mm due to a beam on the wall

It was purchased exactly 1.5 years ago and the motor broke down....
I called the dealership and after a technician came to see it, he said that they need approval from the Techka to proceed with the motor replacement. It has been 15 days and we are without an extractor in the house, unable to cook!
Final conclusion: the product is poor and the technical support from the dealership is tragic

Efficient and beautiful but noisy. However, I have the impression that in order to get a truly quiet one, you have to spend a lot of money (over 500 euros). So in the end, I am satisfied. As for reliability, I don't know yet. We'll see..

I return after almost 1 month of use.
In order for it to perform well, it needs to be on the highest setting of the switch (turbo). However, after a while, it automatically goes back to the previous setting, obviously because the motor cannot handle being on full power all the time, so you need to remember to increase it again. Now, how long it will last like this, we will see...
Look at the photo to see what I did to place it in the position of the previous CNL 2000 that I had.
Overall, we are happy so far.
If I had space in the cabinet, I would probably go for the next one, which is more powerful, but it takes up more height inside the cabinet.

Incredible beautiful, very good absorption, has strong noise only on the last setting which you will rarely need to use. The lighting is impeccable, strong and very nice to the eye

I replaced the old CNL2002 due to motor damage since repairing it is not cost-effective. The installation is quite easy, but there is a difference in the dimensions of the air outlet (circular frame) of about 2.5cm, where some wood cutting may be necessary in the cabinet. The screws fit in the same holes. A small white cable protector on the device needs to be removed to align with the external facade of the cabinet!

Overall, I am satisfied with the purchase and I hope it lasts at least 10 years like the old one. For its price (150€), it is quiet even at high speed and has LED lighting! I recommend it.

P.S. Before the purchase, I spoke with Teka to ensure that I don't buy a model that wouldn't fit the dimensions of its predecessor.

The worst company I have ever purchased from in my life is the maintenance they have and their treatment is very bad.

After a lot of research, I ended up with this specific extractor fan. It is the ultimate MACHINE!!! It is amazing, the noise level is correct, very powerful suction, at the 6th speed it takes you with it!!! I highly recommend it without reservation.