Surface Preparation

• The surface must be dry, clean, and free from dust, debris, and loose old paints.
• Wet sanding is recommended for surface preparation.

Application

• For new surfaces: before applying the paint, apply a coat of water-based primer.
• For surfaces needing repair: use the appropriate repair material.
• For surfaces with stain or mold issues: First, clean the surface and use a stain-blocking primer.

Application Instructions

• Before starting to paint, thin 8-12% with water and mix well.
• Suitable painting tools: Brush, roller, or airless spray gun.
• The product must be tinted exclusively with the recommended tinting system.
• Apply 2 coats for an ideal result.
• Minimum re-coating time 4 – 6 hours.
• Surface drying in 1-2 hours at 25°C and 50% relative humidity.
• Local application of the paint after the completion of painting is not recommended.
• Do not apply at temperatures below 10°C or above 35°C and above 65% relative humidity.

Post-Application Instructions

• Clean tools immediately after use with warm water and soap.
• Seal the container well and store it in a cool place.
• You can gently wash the surfaces with a soft sponge and water after at least 15 days from painting.