Dulux Vinyl Matt emulsion is intended for interior walls and ceilings and dries to a matt finish. It is a water-based acrylic copolymer emulsion with excellent coverage, easy application and resistance to frequent washing.
Apply with a brush, roller, conventional spray gun or airless spray gun. The surface must be sound, clean and dry. Remove any loose paint, grease and dust. Surfaces that remain dusty after preparation should be sealed with a suitable primer. On new or bare surfaces, thin the first coat with up to 1 part water to 5 parts paint. For normal use, thin with up to 1 part water to 10 parts paint. Apply 2 full coats, although 1 coat may be sufficient on previously painted surfaces in good condition and with a similar shade. Do not apply at temperatures below 8 °C, to heated surfaces or in areas subject to frequent, heavy condensation.
- Use: Interior
- Application surfaces: Walls and ceilings
- Colour: White
- Quantity: 2.5 lt
- Finish: Matt
- Base: Water-based acrylic copolymer emulsion
- Coverage: Excellent
- Wash resistance: Suitable for frequent washing
- Thinning: With water, up to 1 part water to 10 parts paint; up to 1 part water to 5 parts paint for the first coat on new or bare surfaces
- Coverage rate: 11 m²/lt per coat
- Drying time: 1–2 hours
- Recoating time: 2–4 hours
- Coats: 2 full coats, or 1 coat on previously painted surfaces in good condition with a similar shade
- Application tools: Brush, roller, conventional spray gun or airless spray gun
- Application temperature: At least 8 °C
- Usage
- Interior
- Quantity
- 2.5 lt
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.