Isomat AK-T55 white adhesive is fiber-reinforced and cement-based, with polymer components (resins). It is used to bond thermal insulation boards made of extruded or expanded polystyrene, stone wool, polyurethane, and cork to the exterior facades of buildings, over concrete, render, or brick masonry. It is also suitable for indoor use.
When used with fiberglass mesh, it coats the insulation boards and creates a substrate for render. It provides initial and final bond strength, flexibility, and moisture resistance. It is classified as GP CS IV, W2 mortar according to EN 998-1 and has an Environmental Product Declaration (EPD).
- Type: Thermal insulation board adhesive
- Base: Cement-based, with polymer components
- Reinforcement: Fibers
- Color: White
- Quantity: 25 kg
- Classification: GP CS IV, W2 according to EN 998-1
- Application: Exterior and interior
- Substrates: Concrete, render, brick masonry
- Consumption as adhesive: 3.0–4.0 kg/m²
- Consumption as reinforced mortar: Approximately 1.5 kg/m² per mm
- Compressive strength: ≥ 12.00 N/mm²
- 28-day adhesion to concrete: ≥ 1.30 N/mm²
- Thermal conductivity (λ10): 0.50 W/(m·K) at P=50%
- Water requirement: 5.50 l per 25 kg bag
- Application temperature: +5 to +35 °C
- Pot life: ≥ 4 h
- Environmental declaration: EPD
- Product Number
- 033507251
- Type
- Thermal Insulation Plates
- Quantity
- 25 kg
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.