Structural Adhesives

Isomat AK-T65 Thermal Insulation Plate Adhesive Gray 25kg

Isomat AK-T65 is a resin-modified, cement-based adhesive for bonding stone wool boards to exterior façades and concrete, plaster or brick masonry surfaces. Combined with reinforcing mesh, it is used...

Isomat AK-T65 is a resin-modified, cement-based adhesive for bonding stone wool boards to exterior façades and concrete, plaster or brick masonry surfaces. Combined with reinforcing mesh, it is used as a reinforced mortar to cover the boards and create a substrate for plaster. It is classified as GP CS IV, W2 mortar according to EN 998-1 and has a reaction...

See Description & Specifications See Description & Specifications
15 20 €
Delivery Mon, 30 Nov - Fri, 04 Dec
74,00 €   shipping cost
Sent from Greece
From Nikolopoulos-bagno 4.7 (57)

Learn more about invoicing

Description & Specifications

Isomat AK-T65 is a resin-modified, cement-based adhesive for bonding stone wool boards to exterior façades and concrete, plaster or brick masonry surfaces. Combined with reinforcing mesh, it is used as a reinforced mortar to cover the boards and create a substrate for plaster. It is classified as GP CS IV, W2 mortar according to EN 998-1 and has a reaction to fire rating of A1.

To prepare, add 6 l of water per 25 kg bag. The application temperature is from +5 to +35 °C, and the pot life is at least 4 hours. The application surface must be clean and damp; porous substrates should be primed with UNI-PRIMER. Consumption is 5 kg/m² when used as an adhesive and approximately 1.5 kg/m² per mm when used as reinforced mortar.

  • Type: Resin-modified, cement-based adhesive
  • Application: Bonding stone wool boards and covering them with reinforced mortar
  • Substrates: Concrete, plaster and brick masonry
  • Colour: Grey
  • Quantity: 25 kg
  • Classification: GP CS IV, W2 according to EN 998-1
  • Reaction to fire: A1
  • Water requirement: 6 l per 25 kg bag
  • Application temperature: From +5 to +35 °C
  • Pot life: ≥ 4 h
  • Compressive strength: ≥ 12 N/mm²
  • 28-day adhesion to concrete: ≥ 1.30 N/mm²
  • 28-day adhesion to stone wool: > 0.05 N/mm², with failure in the stone wool
  • Thermal conductivity (λ10): 0.47 W/(m·K) for P=50%
  • Consumption as an adhesive: 5 kg/m²
  • Consumption as reinforced mortar: Approximately 1.5 kg/m² per mm

Manufacturer

Type
Thermal Insulation Plates
Quantity
25 kg
Colour
Grey

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

15,20 €
74,00 €   shipping cost