Economical and good, I applied 2 coats with the first as a primer diluted by 10%, make sure the surface is clean. It was applied over asphalt membrane. Already the temperature has dropped by 2 degrees in the rooms on the 2nd floor. Apply the second coat after 24 hours, otherwise it sticks when stepped on. 3 pieces of 13 kg were enough for 2 coats on a 60 sqm surface.

Insulation is not a simple matter, it requires a lot of detailed work. Our case was one of the very difficult ones because it is next to the sea and it hasn't been maintained for many years, which means that the old insulation had to be removed with care.
Step 1: removal of old insulation
Step 2: sanding the entire slab
Step 3: thorough sweeping and then washing
Step 4: priming (at least 1 day to dry)
Step 5: polyester mesh where needed, any cracks
Step 6: first coat of insulation (I did not dilute it)
Step 7: after one day, a second coat.
It's a great material and relatively economical!

I got it for my 80 square meter terrace, I applied it first with a base and then 2 coats. It takes two days to dry well.. In the future, we will see what will happen...

Not at all satisfied with the material. It spreads easily but unfortunately the final result does not have good coverage at all as it sticks.

Easy to apply! I did it with a brush. Time will tell for its effectiveness...
Attention: in the instructions, it says to prepare the surface with iso-primer.

Amateur.
It is thick like yogurt, when it dries it becomes elastic like a membrane to the touch and water does not penetrate it. The packaging states that it allows breathability.
I used it to waterproof the attic and shower in the bathroom, as a liquid membrane. I also placed tiles on top of it in the shower, I don't know if I did it correctly.