The Chromodomi Monoblock elastomeric acrylic waterproofing coating insulates and waterproofs roofs, walls and concrete foundations. It can also be applied over bitumen and asphalt insulation, while its acrylic composition provides resistance to solar radiation and moisture.
Before application, the surface must be cleaned of dust, grease, oil, old paint, rust, mould and moisture. First apply Life dur white-spirit-based primer, followed by two coats of Monoblock. Apply the second coat crosswise once the first has dried and is ready for foot traffic. The product reaches its mechanical strength after 20–30 days. Apply with a brush or roller at temperatures between 6 °C and 40 °C and relative humidity of up to 80%. Clean tools immediately with warm water and soap.
- Type: Elastomeric acrylic waterproofing coating
- Form: Liquid coating
- Capacity: 9 L
- Colour: White
- Application surfaces: Roof, wall
- Application surface materials: Asphalt-based material, concrete, bitumen
- Application tools: Brush, roller
- First-coat drying time: 24 hours
- Time to reach mechanical strength: 20–30 days
- Application temperature: 6 °C to 40 °C
- Maximum relative humidity during application: 80%
Product Details
- Type
- Lubricating Liquid
- Colour
- White
- Application Surface
- Terrace, Wall
- Application Surface Material
- Asphalt Material, Concrete, Tar
Additional Specifications
- Polyurethane
- No
- Elastomer
- Yes
- Acrylic
- Yes
- Bituminous
- No
- Cementitious
- No
- 2-Component
- No
Packaging
- Capacity
- 9 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.