Skroutz.mt

Makita DDA351ZJ Angle Drill Driver Battery Solo 18V
Power Drill Drivers & Screwdrivers

Makita DDA351ZJ Angle Drill Driver Battery Solo 18V

The Makita DDA351ZJ is an angle drill driver with an ergonomic design for precise drilling and reduced fatigue during use. It features electronic functions for safe operation and comes with a side...

The Makita DDA351ZJ is an angle drill driver with an ergonomic design for precise drilling and reduced fatigue during use. It features electronic functions for safe operation and comes with a side handle. It is compatible with Makita 18V LXT batteries and is supplied without a battery or charger.

  • Type: Angle drill driver
  • Power source: Battery
  • Voltage: 18 V
  • ...
See full description See full description

Top specs

  • Power Supply

    Battery

    Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.

  • Number of Batteries

    0

    Solo - The package does not include a battery and charger. Please prefer it if you already have a compatible battery from other tools.

  • Speed Setting

    Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)

  • Voltage

    It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

  • Maximum Motor Speed

    The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.

  • Chuck Diameter

    The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The Makita DDA351ZJ is an angle drill driver with an ergonomic design for precise drilling and reduced fatigue during use. It features electronic functions for safe operation and comes with a side handle. It is compatible with Makita 18V LXT batteries and is supplied without a battery or charger.

  • Type: Angle drill driver
  • Power source: Battery
  • Voltage: 18 V
  • Maximum speed: Up to 1,800 rpm
  • Chuck / holder: Keyless chuck, up to 10 mm
  • Drilling capacity: Wood up to 25 mm, steel up to 10 mm
  • Weight: 1,800 g with battery

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

Battery Features

Number of Batteries
0

Number of Batteries: 0


Solo - The package does not include a battery and charger. Please prefer it if you already have a compatible battery from other tools.
Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Compatible Battery Type
Makita 18V LXT

Compatible Battery Type

The type of battery that can be installed in the tool.

Drilling Abilities

Steel Ø
10 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.
Wood Ø
25 mm

Features & Functions

Maximum Motor Speed
1800 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Number of Hits
-
Torque Adjustment
No

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
No

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
Yes

Angle


Features a head that is positioned at an angle (usually 90 degrees) relative to the body of the tool, thus allowing access to tight or hard-to-reach angles.
Interchangeable Head
No
Reception
Quick Change
Maximum Chuck Diameter
10 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Weight (with Battery)
1800 gr

Extra Features

Carrying Case
Hard Case

Carrying Case

Hard Case
Delivered with a hard carrying case.
Handle Included
Yes
Integrated Light
No
With Charger
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Makita DDA351ZJ is an angle drill driver with an ergonomic design for precise drilling and reduced fatigue during use. It features electronic functions for safe operation and comes with a side handle. It is compatible with Makita 18V LXT batteries and is supplied without a battery or charger.

  • Type: Angle drill driver
  • Power source: Battery
  • Voltage: 18 V
  • Maximum speed: Up to 1,800 rpm
  • Chuck / holder: Keyless chuck, up to 10 mm
  • Drilling capacity: Wood up to 25 mm, steel up to 10 mm
  • Weight: 1,800 g with battery

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

Battery Features

Number of Batteries
0

Number of Batteries: 0


Solo - The package does not include a battery and charger. Please prefer it if you already have a compatible battery from other tools.
Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Compatible Battery Type
Makita 18V LXT

Compatible Battery Type

The type of battery that can be installed in the tool.

Drilling Abilities

Steel Ø
10 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.
Wood Ø
25 mm

Features & Functions

Maximum Motor Speed
1800 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Number of Hits
-
Torque Adjustment
No

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
No

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
Yes

Angle


Features a head that is positioned at an angle (usually 90 degrees) relative to the body of the tool, thus allowing access to tight or hard-to-reach angles.
Interchangeable Head
No
Reception
Quick Change
Maximum Chuck Diameter
10 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Weight (with Battery)
1800 gr

Extra Features

Carrying Case
Hard Case

Carrying Case

Hard Case
Delivered with a hard carrying case.
Handle Included
Yes
Integrated Light
No
With Charger
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

279,98 €
20,00 €   shipping cost