UPDATE: STAY AWAY FROM THIS PASTE
I will also leave my initial review below. The first two applications were perfect. I applied it to the processor and graphics card and had temperatures the same or even better than MX4.
The third time I used the paste, I noticed an increase in temperatures on both the card and processor, both in load and idle. Previously, I had a maximum of 40 degrees Celsius at idle with the Cryorig H7 cooler, but now I was seeing 55+. In load, it reached 90+. The same happened with the GPU. So, I started adjusting the overclock settings, lowering clock speeds and voltages, but nothing worked, everything was overheating.
I then opened up the processor and graphics card cooler and saw the unbelievable: scratches and marks on the surface of the processor and cooler. Obviously, the paste contains solid particles, possibly metallic, which caused the damage you see. The surface of the processor was so damaged that even a nail could find it. Of course, both the processor and cooler were destroyed, but especially the graphics card.
That's all for this disgusting product. I saw in forums that others had the same issue. I don't want to be mean, but I wish a tsunami would hit the powertech factory. Because it's hard to get justice in this situation.
And no, it wasn't my mistake. Before every repaste, I clean with microfiber and isopropyl alcohol.
Here is my initial review... I can't believe it.
It is clearly the most value for money paste. For years, I used MX and Noctua's paste. And honestly, I don't see any difference in temperatures.
UPDATE: ΜΑΚΡΙΑ ΑΠΟ ΑΥΤΗ ΤΗΝ ΠΑΣΤΑ
Αφήνω κ την αρχική μπ αξιολόγηση παρακάτω . Οι 2 πρώτες εφαρμογές ήταν τέλειες. Την έβαλα σε επεξεργαστή κ καρτα γραφικών κ είχα θερμοκρασίες ιδιες κ καλύτερες μην πω από ΜΧ4.
Την τριτη φορά που χρησιμοποίησα την πάστα, παρατήρησα αύξηση στις θερμοκρασίες σε καρτα και επεξεργαστή. Και σε load αλλά και idle. Idle είχα 40max με Cryorig H7 ψυκτρα και τώρα έβλεπα 55+. Σε load 90+. Και gpu το ίδιο. Άρχισα λοιπόν να πειράζω Overclock settings, να χαμηλώνω ρολόγια και ρεύματα , αλλά τίποτα, τα πάντα ψηνότανε.
Άνοιξα λοιπόν ψυκτρα επεξεργαστή και κάρτας και είδα το αδιανόητο, να μου έχει κάνει γρατσουνιές, χαρακιές καο στην επιφάνεια του επεξεργαστή και της ψύκτρας.
ΠΡΟΦΑΝΩΣ η πάστα έχει μέσα κομμάτια στερεά, ίσως μεταλλικά, τα οποία με την πίεση έκαναν τη ζημιά που βλέπετε. Στον δε επεξεργαστή, «βρίσκει» το νύχι, τόσο χάλια έγινε η επιφάνεια. Φυσικά καταστράφηκε και ο επεξεργαστής και η ψυκτρα αλλά κυρίως η καρτα γραφικών.
Αυτά λοιπόν για αυτή την αηδία. Σε φόρουμ είδα πως κι άλλοι είχαν ίδιο θέμα. Δε θέλω να γίνομαι κακος, ομως μακάρι τσουνάμι στο εργοστάσιο της powertech. Γιατί άντε να βρεις το δίκιο σου.
Και όχι, ήταν δικό μου λάθος, πριν από κάθε repaste καθαρίζω με microfiber και ισοπροπυλικη.
Ορίστε και η αρχική αξιολόγηση μου.. τρομάρα μου.
Είναι ξεκάθαρα η πιο value for money πάστα. Χρόνια τώρα έπαιρνα την ΜΧ και της πάστα της Noctua. Ε πραγματικά δεν εχω την παραμικρή διαφορά σε θερμοκρασίες.