3D Printer Filament

3D Prima PrimaSelect PETG 1.75mm Transparent Yellow 0.75kg 1τμχ (Spool) 3D Printer Filament Code: PS-PETG-175-0750-TYL

PrimaCreator's PrimaSELECT PETG filament is intended for 3D printing with FFF/FDM printers. PETG has low shrinkage, good layer adhesion, and moisture resistance. The transparent yellow shade gives...

PrimaCreator's PrimaSELECT PETG filament is intended for 3D printing with FFF/FDM printers. PETG has low shrinkage, good layer adhesion, and moisture resistance. The transparent yellow shade gives prints a glossy finish, while their transparency depends on the number and thickness of the layers.

The printing temperature ranges from 195 to 235 °C, and the...

See full description See full description

Top specs

  • Weight 0.75 kg
  • Diameter 1.75 mm
  • See all
25 30 €
Delivery by Tue, 24 Nov
14,00 €   shipping cost
Sent from Greece
From Top Electronics 4.9 (38)

Learn more about invoicing

Description

Description

PrimaCreator's PrimaSELECT PETG filament is intended for 3D printing with FFF/FDM printers. PETG has low shrinkage, good layer adhesion, and moisture resistance. The transparent yellow shade gives prints a glossy finish, while their transparency depends on the number and thickness of the layers.

The printing temperature ranges from 195 to 235 °C, and the printing speed from 35 to 80 mm/s. A heated bed is not required; optionally, its temperature can be set to 40–65 °C. The filament adheres to BuildTak, PEI, or a glass surface with glue.

  • Material: PETG
  • Color: Transparent yellow
  • Diameter: 1.75 mm
  • Diameter tolerance: ±0.05 mm
  • Weight: 0.75 kg
  • Filament length: 246 m
  • Packaging type: Spool
  • Quantity: 1 piece
  • Density: 1.27 g/cm³
  • Printing temperature: 195–235 °C
  • Recommended printer temperature: 215 °C
  • Print bed temperature: 40–65 °C
  • Printing speed: 35–80 mm/s
  • Compatibility: FFF/FDM printers

Manufacturer

See full description

Specifications

Specifications

Product Number
PS-PETG-175-0750-TYL
Material
PETG
Colour
Yellow
Diameter
1.75 mm
Weight
0.75 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

PrimaCreator's PrimaSELECT PETG filament is intended for 3D printing with FFF/FDM printers. PETG has low shrinkage, good layer adhesion, and moisture resistance. The transparent yellow shade gives prints a glossy finish, while their transparency depends on the number and thickness of the layers.

The printing temperature ranges from 195 to 235 °C, and the printing speed from 35 to 80 mm/s. A heated bed is not required; optionally, its temperature can be set to 40–65 °C. The filament adheres to BuildTak, PEI, or a glass surface with glue.

  • Material: PETG
  • Color: Transparent yellow
  • Diameter: 1.75 mm
  • Diameter tolerance: ±0.05 mm
  • Weight: 0.75 kg
  • Filament length: 246 m
  • Packaging type: Spool
  • Quantity: 1 piece
  • Density: 1.27 g/cm³
  • Printing temperature: 195–235 °C
  • Recommended printer temperature: 215 °C
  • Print bed temperature: 40–65 °C
  • Printing speed: 35–80 mm/s
  • Compatibility: FFF/FDM printers

Manufacturer

Product Number
PS-PETG-175-0750-TYL
Material
PETG
Colour
Yellow
Diameter
1.75 mm
Weight
0.75 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

25,30 €
14,00 €   shipping cost