easy to assemble and use, quite good but does not justify its price, offers the same as an identical one for 25 euros. 3 stars for the price

Very good, it gives full ability to adjust the position of the screen. It is a huge upgrade from the static stand that comes with computer monitors. The stand is stable and installs easily.

It seems to be a sturdy construction but it cannot hold a screen with less weight than what the company states as maximum.

Very sturdy, stable, and heavy construction. After 3 years, I am completely satisfied.
Only a small issue: there is some play in the rotation of the screen and it does not lock exactly in the horizontal position on its own automatically, but you need to balance it with your eye. However, once you place the screen in any position, it holds it still.

Beautiful, powerful, and perfect for the 32" LG. The use I make of it is on a table in a recording studio to go back when we make sound and in front of the consoles for general use. It performs this movement flawlessly and stays where you leave it.

I have 2 siblings, one of whom is my brother and the other is my sister. They are both doing well. Occasionally, there is a little tension (I think it's due to the hot and cold weather every 6 months) with my brother, but even that is minimal. There is a crazy atmosphere at the office.

Very good screen base, sturdy with good materials, I use it for a 27' screen, it holds it at any height I want with the appropriate tightening of the settings it has. Assembly for me was very easy and the instructions were understandable. The only downside, which doesn't bother me, is that when you move it, it doesn't maintain its correct horizontal position and you have to make a small adjustment to it.

No matter how much I tightened it, it didn't fit well! And I didn't even reach its weight limits. Since I'm going to change the monitor and switch to a bigger one, there's no chance I'll keep it. Very useful as a tool, but this particular one doesn't meet my criteria!

Excellent product. It is used for a DELL 27'' screen and it seems to be of very good quality construction. It can be installed within a short time and really saves a lot of space on your desk.

Excellent product, I have had it for a few months now and have not encountered any problems whatsoever.

2. It is used with a 28-inch 4K Samsung monitor connected with a VESA mount.

3. The use of the stand is relatively conservative. I do not frequently move the "arm" of the stand back and forth or up and down. It is usually in a fixed position, but when I occasionally move it to change the viewing angle, it returns to its original position without difficulty.

4. I would highly recommend it. Excellent value for money proposition.

Excellent base. It perfectly supports my 34" Gigabyte Curved monitor. Easy installation, easy adjustment. For heavy monitors, I recommend tightening the screws before the final placement of the screen and then making the necessary adjustments.

I have it for over a year in a professional space, it is an excellent upgrade for adjusting the screen position. Buy it without fear!

I use it for a 32' AOC CURVED monitor and it barely holds with maximum tightening on all screws.
I cannot stabilize the horizontal position of the screen and every time I need to hold it to move it, I have to 'level it' again

Excellent durability and adaptability, easy to assemble, cables are well hidden in the designated spaces, very good design. I highly recommend it. I use it with a 24' LG monitor.

Awesome build quality, heavy metal construction with clear assembly instructions but it is good to have 2 people when mounting the monitor on the arm. It frees up space on the desk with the ability to adjust the monitor in any direction. I put it on a 34 ultrawide curved monitor and it holds it perfectly. It's worth its money.

Just as previous reviewers have stated in their descriptions, which fully cover me. The only thing I would like to add is that in my case, with a 34' ultrawide monitor weighing 7 kilograms, I had to exert a considerable amount of force to tighten the tilt axis screw properly, in order to stabilize it at the appropriate angle without the weight causing it to "look" downwards. Therefore, I would recommend tightening this screw before placing the monitor to avoid any inconvenience. Other than that, the installation was very easy, so much so that I managed to do it on my own.

PERFECT !!!!. Stable, beautiful and easy to install. BE CAREFUL though with one detail. The alen screw that secures the two arms has reverse operation. Lefty-tighty.

I put it on an Alienware ultra wide 34 and it holds it comfortably.
Easy instructions.
Very good construction.
I have had it for about 2 months and the stand has not lost its position and settings

I have installed 34 ultrawide monitors and it holds up just fine. It has a screw to adjust the stiffness to hold the weight, and when I first installed it, I was worried because I was screwing it and it didn't make a difference, but in the end, it just needs enough tightening. I highly recommend it. It makes a big difference in everyday use of the screen, and you only need to buy it once. It doesn't have anything to break, and all screens will always be screwed in as long as they support a stand. I regret not getting it for so many years with my previous screens.

I have the Samsung c34h890 on top, which weighs 6.3 kilograms and keeps it stable. Very good construction. It frees up a lot of space on the desk.

Very powerful! Opening it, one immediately realizes the solidity of its construction. It is very easy to assemble. Nice feature of hiding the cables. It has a screw that controls the hardness of the horizontal rotations (it will need initial tightening). You can place the screen wherever you want and it stays there.

It is important for the desk on which it will be supported to be as immovable as possible. If someone "stretches" the arm and the desk is not stable, even the slightest hit on the keyboard will noticeably shake the screen. It can be attached either with a clamp or with a large screw.

Awesome how much space it frees up. It does not have a backward movement in conventional bases :)

The product is a very good construction. I installed a 28' monitor and it holds it very well. Overall, it is a quality product, which is why its price is proportional.

Excellent product and at a very good price.

It comes in very good packaging and from the moment you hold its components in your hands, you understand their quality and durability.

It takes a little time to assemble and the instructions are barely clear. However, with a little attention, you can assemble it in 10-20 minutes.

Perhaps the only negative is when the arm is 'stretched' and at medium height (neither too high nor too low), it barely holds my 5kg screen at a stable height. By tightening an allen screw that it has, I managed to make it 'hold' it without losing height. However, I don't know about a heavier screen or what will happen in the future (although it looks very sturdy, so I shouldn't have a problem).

VFM