Skroutz.mt

Leo Group APM90 Electric Surface Water Pump Centrifugal 1hp Single-Phase
Surface Water Pumps

Leo Group APM90 Electric Surface Water Pump Centrifugal 1hp Single-Phase Code: 01075

The Leo Group APM90 electric surface pump is single-stage and centrifugal, with a brass impeller. It operates on a single-phase 220 V power supply and is installed horizontally.

The inlet and outlet...

The Leo Group APM90 electric surface pump is single-stage and centrifugal, with a brass impeller. It operates on a single-phase 220 V power supply and is installed horizontally.

The inlet and outlet ports have a diameter of 3/4″. The maximum head is 90 m, while the flow rate and corresponding operating head are 0 m³/h at 90 m, 1.2 m³/h at 35 m, and 1.8 m³/h...

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Centrifugal

    Pumps with impellers that enhance water flow.
  • Voltage Single-Phase

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The Leo Group APM90 electric surface pump is single-stage and centrifugal, with a brass impeller. It operates on a single-phase 220 V power supply and is installed horizontally.

The inlet and outlet ports have a diameter of 3/4″. The maximum head is 90 m, while the flow rate and corresponding operating head are 0 m³/h at 90 m, 1.2 m³/h at 35 m, and 1.8 m³/h at 15 m.

  • Power supply: Electric
  • Type: Single-stage
  • Pump design: Centrifugal
  • Impeller: Brass
  • Horsepower: 1 hp
  • Power: 750 W
  • Voltage: Single-phase, 220 V
  • Installation: Horizontal
  • Inlet and outlet ports: 3/4″ × 3/4″
  • Maximum head: 90 m
  • Flow rate and head: 0 m³/h at 90 m, 1.2 m³/h at 35 m, and 1.8 m³/h at 15 m

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
01075

Main Specifications

Type
Single Stage

Type

Single Stage
They have a wing, making maintenance quite easy. They are suitable for low pressure operations where a high flow rate is maintained (e.g. irrigation).
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Power
750 W
Manometric Head
90 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Leo Group APM90 electric surface pump is single-stage and centrifugal, with a brass impeller. It operates on a single-phase 220 V power supply and is installed horizontally.

The inlet and outlet ports have a diameter of 3/4″. The maximum head is 90 m, while the flow rate and corresponding operating head are 0 m³/h at 90 m, 1.2 m³/h at 35 m, and 1.8 m³/h at 15 m.

  • Power supply: Electric
  • Type: Single-stage
  • Pump design: Centrifugal
  • Impeller: Brass
  • Horsepower: 1 hp
  • Power: 750 W
  • Voltage: Single-phase, 220 V
  • Installation: Horizontal
  • Inlet and outlet ports: 3/4″ × 3/4″
  • Maximum head: 90 m
  • Flow rate and head: 0 m³/h at 90 m, 1.2 m³/h at 35 m, and 1.8 m³/h at 15 m

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
01075

Main Specifications

Type
Single Stage

Type

Single Stage
They have a wing, making maintenance quite easy. They are suitable for low pressure operations where a high flow rate is maintained (e.g. irrigation).
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Power
750 W
Manometric Head
90 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

105,00 €
26,00 €   shipping cost