Dimensions

Type

MIG, TIG, MMA

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

Welding Current (max)

170 A

Welding Current (max): 170

Suitable for use in medium-thickness metal constructions and pipelines.

Operation Cycle (max Ampere)

60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

Supply Voltage

230 V

Supply Voltage: 230

It is the supply voltage that the machine requires from the electrical grid.

Power

6 kVA

Power: 6

Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.

Maximum Electrode Diameter

4 mm

Maximum Electrode Diameter: 4

The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.

Maximum Wire Diameter

0.9 mm

Maximum Wire Diameter: 0.9

The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.

Weight

17000 gr

Additional Features

Inverter

Yes

Inverter

New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.

IGBT

Yes

IGBT

Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.

VRD

No

with Voltage Stabilizer

No

for Generator with AVR

No

Features

Hot Start

No

Anti Stick

No

Arc Force

No

2T Operation

No

4T Mode

No

Spot Function

No

Pulsed

No