Skroutz.mt

Real Filament PETG 3D Printer Filament 1.75mm White 1kg 1 Piece (Spool)
3D Printer Filament

Real Filament PETG 3D Printer Filament 1.75mm White 1kg 1 Piece (Spool) Code: NLPETGSWHITE1000MM175

Real Filament PETG filament is suitable for 3D printing objects with strong mechanical properties and a glossy finish. PETG is hydrophobic, has low shrinkage, and offers strong interlayer adhesion,...

Real Filament PETG filament is suitable for 3D printing objects with strong mechanical properties and a glossy finish. PETG is hydrophobic, has low shrinkage, and offers strong interlayer adhesion, resulting in prints that can bend rather than break. It can be printed with or without a heated bed, with little to no warping.

  • Material: PETG
  • Color: White
  • ...
See full description See full description

Top specs

  • Material

    PETG

    (Polyethylene Terephthalate Glycol) Combines the properties of PLA and ABS, with high strength, flexibility, and resistance to chemicals and moisture. Ideal for durable parts and outdoor use.
  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

Real Filament PETG filament is suitable for 3D printing objects with strong mechanical properties and a glossy finish. PETG is hydrophobic, has low shrinkage, and offers strong interlayer adhesion, resulting in prints that can bend rather than break. It can be printed with or without a heated bed, with little to no warping.

  • Material: PETG
  • Color: White
  • Diameter: 1.75 mm
  • Weight: 1 kg
  • Packaging: Spool
  • Quantity: 1 piece

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
NLPETGSWHITE1000MM175
Material
PETG

Material

PETG
(Polyethylene Terephthalate Glycol) Combines the properties of PLA and ABS, with high strength, flexibility, and resistance to chemicals and moisture. Ideal for durable parts and outdoor use.
Colour
White
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool

Filament Packaging

Spool
The filament comes wound on a spool. Ready to use without additional accessories.
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (16)

Reviews

4.3
16
4.3
Review this product
  1. 10
  2. 3
  3. 1
  4. 2
  5. 1 star
    0
Review this product

What do users say? AI-generated summary

Overall, users feel that PETG offers good value for money and can produce very good prints. They also note that it is suitable for prints that need heat resistance and that, with the right settings, odors and warping can be avoided. However, some users struggled with temperature settings and found printing more demanding or the quality inferior to other brands.

Reviews photos

Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • giannis199729
    3
    1 out of 1 members found this review helpful
    giannis199729

    Verified purchase

    Personally, I wouldn't buy it again. Yes, it's affordable, but it obviously lacks the quality of a more expensive thread. You can get the job done, but it requires much more effort because you have issues with the printer compared to a better one. Tested on ender 3 pro and ender 5 plus

    Translated from Greek ·
    Did you find this review helpful?
  • ilfritza
    4
    0 out of 1 members found this review helpful
    ilfritza

    Verified purchase

    This review is about the colour: Black

    At #TED3D we have tried a plethora of filaments, it is quite decent for its price, without meaning that there are no better and/or more economical options

    Translated from Greek ·
    Did you find this review helpful?
  • MICHALIS_SPANOS
    5
    MICHALIS_SPANOS

    Verified purchase

    This review is about the colour: Green

    The first print I made by purchasing an Artillery hornet was with this green PETG. I preferred it over PLA due to its resistance to temperatures, hardness, and factory settings (240 C, 80 C, etc.). The prints came out perfect (for me) as well as with the black, but the red and blue semi-transparent ones gave me more difficulty (the material comes out harder...)

    Translated from Greek ·
    Did you find this review helpful?
  • GEORGE_KONIARIS652
    5
    GEORGE_KONIARIS652

    Verified purchase

    good for its price came in a well-packaged manner

    Translated from Greek ·
    Did you find this review helpful?
  • Yiorgos_Theo21
    5
    2 out of 2 members found this review helpful
    Yiorgos_Theo21
    This review is about the colour: Black

    I bought it 2-3 years ago, it was the first one I tried to print with and I was really disappointed, I couldn't achieve a decent print no matter what. I put it aside and picked it up again about a month ago when I ran out of ABS that I use. The prints came out perfect! I believe the initial negative impression was due to my inexperience, the filament prints just fine, the quality seems a little better than ABS and it has no issues with smells and warping. 0.6mm nozzle, 0.3mm layer height, 240°C nozzle temp, 85°C hotbed temp, 6mnm retract @50mm/s

    Translated from Greek ·
    Did you find this review helpful?
  • Keno
    2
    2 out of 2 members found this review helpful
    Keno
    Expert user
    This review is about the colour: Black

    I don't know if I got a bad coil or if it's just a bad filament, but compared to other brands of the same price, it's disappointing

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    Traianos_Papanikolaou

    Verified purchase

    This review is about the colour: Red

    The price fluctuates as if it were a stock market depending on the color and stock

    Translated from Greek ·
    Did you find this review helpful?
  • 2
    johnpapast

    Verified purchase

    This review is about the colour: Black

    There are more quality and cheaper ones than this, it requires special attention to temperatures.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Chris_Arapis8493

    Verified purchase

    This review is about the colour: Red

    ALL GOOD.............!!!

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Vagelis_Rotas

    Verified purchase

    Excellent! I didn't expect to be able to print on the first try... very good result... 250C 70C

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Iordanis_Sidiropoulos

    Verified purchase

    This review is about colour: Orange, weight: 0.5 kg

  • 4
    Big_Easy

    Verified purchase

  • 5
    Dimitris_Liaskonis

    Verified purchase

    This review is about the colour: Black

  • 5
    Christos_Cholevas

    Verified purchase

  • 5
    Christos_Cholevas

    Verified purchase

    This review is about the colour: Black

  • 5
    vasilis.georgalas.5

    Verified purchase

    This review is about the colour: Red

  • giannis199729
    3
    giannis199729

    Personally, I wouldn't buy it again. Yes, it's affordable, but it obviously lacks the quality of a more expensive thread. You can get the job done, but it requires much more effort because you have issues with the printer compared to a better one. Tested on ender 3 pro and ender 5 plus

    Translated from Greek ·
    1
  • ilfritza
    4
    ilfritza

    At #TED3D we have tried a plethora of filaments, it is quite decent for its price, without meaning that there are no better and/or more economical options

    Translated from Greek ·
    0
  • MICHALIS_SPANOS
    5
    MICHALIS_SPANOS

    The first print I made by purchasing an Artillery hornet was with this green PETG. I preferred it over PLA due to its resistance to temperatures, hardness, and factory settings (240 C, 80 C, etc.). The prints came out perfect (for me) as well as with the black, but the red and blue semi-transparent ones gave me more difficulty (the material comes out harder...)

    Translated from Greek ·
    0
  • GEORGE_KONIARIS652
    5
    GEORGE_KONIARIS652

    good for its price came in a well-packaged manner

    Translated from Greek ·
    0
  • Yiorgos_Theo21
    5
    Yiorgos_Theo21

    I bought it 2-3 years ago, it was the first one I tried to print with and I was really disappointed, I couldn't achieve a decent print no matter what. I put it aside and picked it up again about a month ago when I ran out of ABS that I use. The prints came out perfect! I believe the initial negative impression was due to my inexperience, the filament prints just fine, the quality seems a little better than ABS and it has no issues with smells and warping. 0.6mm nozzle, 0.3mm layer height, 240°C nozzle temp, 85°C hotbed temp, 6mnm retract @50mm/s

    Translated from Greek ·
    2
  • See all

Description & Specifications

Real Filament PETG filament is suitable for 3D printing objects with strong mechanical properties and a glossy finish. PETG is hydrophobic, has low shrinkage, and offers strong interlayer adhesion, resulting in prints that can bend rather than break. It can be printed with or without a heated bed, with little to no warping.

  • Material: PETG
  • Color: White
  • Diameter: 1.75 mm
  • Weight: 1 kg
  • Packaging: Spool
  • Quantity: 1 piece

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
NLPETGSWHITE1000MM175
Material
PETG

Material

PETG
(Polyethylene Terephthalate Glycol) Combines the properties of PLA and ABS, with high strength, flexibility, and resistance to chemicals and moisture. Ideal for durable parts and outdoor use.
Colour
White
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool

Filament Packaging

Spool
The filament comes wound on a spool. Ready to use without additional accessories.
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (16)

4.3
16
4.3
Review this product
  1. 10
  2. 3
  3. 1
  4. 2
  5. 1 star
    0
Review this product

What do users say? AI-generated summary

Overall, users feel that PETG offers good value for money and can produce very good prints. They also note that it is suitable for prints that need heat resistance and that, with the right settings, odors and warping can be avoided. However, some users struggled with temperature settings and found printing more demanding or the quality inferior to other brands.

Reviews photos

Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • giannis199729
    3
    1 out of 1 members found this review helpful
    giannis199729

    Verified purchase

    Personally, I wouldn't buy it again. Yes, it's affordable, but it obviously lacks the quality of a more expensive thread. You can get the job done, but it requires much more effort because you have issues with the printer compared to a better one. Tested on ender 3 pro and ender 5 plus

    Translated from Greek ·
    Did you find this review helpful?
  • ilfritza
    4
    0 out of 1 members found this review helpful
    ilfritza

    Verified purchase

    This review is about the colour: Black

    At #TED3D we have tried a plethora of filaments, it is quite decent for its price, without meaning that there are no better and/or more economical options

    Translated from Greek ·
    Did you find this review helpful?
  • MICHALIS_SPANOS
    5
    MICHALIS_SPANOS

    Verified purchase

    This review is about the colour: Green

    The first print I made by purchasing an Artillery hornet was with this green PETG. I preferred it over PLA due to its resistance to temperatures, hardness, and factory settings (240 C, 80 C, etc.). The prints came out perfect (for me) as well as with the black, but the red and blue semi-transparent ones gave me more difficulty (the material comes out harder...)

    Translated from Greek ·
    Did you find this review helpful?
  • GEORGE_KONIARIS652
    5
    GEORGE_KONIARIS652

    Verified purchase

    good for its price came in a well-packaged manner

    Translated from Greek ·
    Did you find this review helpful?
  • Yiorgos_Theo21
    5
    2 out of 2 members found this review helpful
    Yiorgos_Theo21
    This review is about the colour: Black

    I bought it 2-3 years ago, it was the first one I tried to print with and I was really disappointed, I couldn't achieve a decent print no matter what. I put it aside and picked it up again about a month ago when I ran out of ABS that I use. The prints came out perfect! I believe the initial negative impression was due to my inexperience, the filament prints just fine, the quality seems a little better than ABS and it has no issues with smells and warping. 0.6mm nozzle, 0.3mm layer height, 240°C nozzle temp, 85°C hotbed temp, 6mnm retract @50mm/s

    Translated from Greek ·
    Did you find this review helpful?
  • Keno
    2
    2 out of 2 members found this review helpful
    Keno
    Expert user
    This review is about the colour: Black

    I don't know if I got a bad coil or if it's just a bad filament, but compared to other brands of the same price, it's disappointing

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    Traianos_Papanikolaou

    Verified purchase

    This review is about the colour: Red

    The price fluctuates as if it were a stock market depending on the color and stock

    Translated from Greek ·
    Did you find this review helpful?
  • 2
    johnpapast

    Verified purchase

    This review is about the colour: Black

    There are more quality and cheaper ones than this, it requires special attention to temperatures.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Chris_Arapis8493

    Verified purchase

    This review is about the colour: Red

    ALL GOOD.............!!!

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Vagelis_Rotas

    Verified purchase

    Excellent! I didn't expect to be able to print on the first try... very good result... 250C 70C

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Iordanis_Sidiropoulos

    Verified purchase

    This review is about colour: Orange, weight: 0.5 kg

  • 4
    Big_Easy

    Verified purchase

  • 5
    Dimitris_Liaskonis

    Verified purchase

    This review is about the colour: Black

  • 5
    Christos_Cholevas

    Verified purchase

  • 5
    Christos_Cholevas

    Verified purchase

    This review is about the colour: Black

  • 5
    vasilis.georgalas.5

    Verified purchase

    This review is about the colour: Red

  • giannis199729
    3
    giannis199729

    Personally, I wouldn't buy it again. Yes, it's affordable, but it obviously lacks the quality of a more expensive thread. You can get the job done, but it requires much more effort because you have issues with the printer compared to a better one. Tested on ender 3 pro and ender 5 plus

    Translated from Greek ·
    1
  • ilfritza
    4
    ilfritza

    At #TED3D we have tried a plethora of filaments, it is quite decent for its price, without meaning that there are no better and/or more economical options

    Translated from Greek ·
    0
  • MICHALIS_SPANOS
    5
    MICHALIS_SPANOS

    The first print I made by purchasing an Artillery hornet was with this green PETG. I preferred it over PLA due to its resistance to temperatures, hardness, and factory settings (240 C, 80 C, etc.). The prints came out perfect (for me) as well as with the black, but the red and blue semi-transparent ones gave me more difficulty (the material comes out harder...)

    Translated from Greek ·
    0
  • GEORGE_KONIARIS652
    5
    GEORGE_KONIARIS652

    good for its price came in a well-packaged manner

    Translated from Greek ·
    0
  • Yiorgos_Theo21
    5
    Yiorgos_Theo21

    I bought it 2-3 years ago, it was the first one I tried to print with and I was really disappointed, I couldn't achieve a decent print no matter what. I put it aside and picked it up again about a month ago when I ran out of ABS that I use. The prints came out perfect! I believe the initial negative impression was due to my inexperience, the filament prints just fine, the quality seems a little better than ABS and it has no issues with smells and warping. 0.6mm nozzle, 0.3mm layer height, 240°C nozzle temp, 85°C hotbed temp, 6mnm retract @50mm/s

    Translated from Greek ·
    2
  • See all