Skroutz.mt

AEG Chimney Vent Hood 60cm Inox
Vent Hoods

AEG Chimney Vent Hood 60cm Inox Code: DBB5660HM

Key features:

  • Width: 60cm
  • Absorption Power (Max): 352m³/h
  • Absorption Power (Boost): 779m³/h
  • Noise Level: 55 dB

The AEG vent hood with a suction power of 352 m³/h, which can adequately cover spaces up to 12m².

See full description

  • Item

    Chimney

    The chimney-style hoods cover the air duct with a decorative element that resembles a chimney.

  • Noise Level

    Shows how much noise the extractor makes when it is in operation.

    2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

  • Energy class

    The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

    2. The higher the energy class, the lower the electricity consumption.

    3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.

  • Extraction Power (Max)

    Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


    For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

  • Filter Type

    Charcoal (optional)

    Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


    They are not washable and it is recommended to replace them every 4 months.


    Their use reduces the efficiency of the range hood by about 30%.

    Metal

    They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

Natural air, easily and quietly

The elegantly designed AEG vent hood discreetly removes odors thanks to the ultra-quiet Breeze technology. This way, you can have a better environment in your kitchen, quietly and effortlessly.

Hob2Hood

The Hob2Hood automatically controls the power level and lights of the vent hood, allowing you to focus on the details of proper food preparation.

A powerful motor for cleaner air in the kitchen

Whether you're frying steak or sautéing salmon, the high-performance motor ensures that the air in your kitchen stays fresh. Relax, knowing that your kitchen will always be a pleasant and welcoming environment.

LEDlights

Our LEDlights require much less energy than other types of lighting and have a longer lifespan. They provide professional lighting for greater precision in cooking.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
DBB5660HM

Product Details

Type
Chimney

Type

Chimney
The chimney-style hoods cover the air duct with a decorative element that resembles a chimney.
Retro
No
Grease Filter Material
Charcoal (optional), Metal

Grease Filter Material

Charcoal (optional)

Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


They are not washable and it is recommended to replace them every 4 months.


Their use reduces the efficiency of the range hood by about 30%.

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
Extraction Mode
Extraction or Recirculation

Extraction Mode

Concerns the way in which the extractor absorbs air.

Extraction or Recirculation

The extractor fan has both functions. The air that the extractor fan draws can either be extracted through a pipe or recycled back into the fan. For air extraction function, a pipe is needed to remove the air outside the kitchen.
Dual Motor
No
Type of Control
Touch Keys
Timer Function
No
Filter Cleaning Indicator
Yes
Washable Filter
Yes
Colour
Inox

Technical Features

Extraction Power (Max)
352 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.
Extraction Power (Boost)
779 m³/h

Extraction Power (Boost)

The boost power enhances absorption even more for a short period of time. After a while, it returns to maximum absorption.


The function is ideal for odors during frying and grilling.

Dimensions

Width
60 cm
Length
50 cm

Energy Label

Energy Class
A

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
58 kWh/y
Extraction Flow Efficiency
A

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
A

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
C

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
55 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (9)

Reviews

3.4
9
3.4
Review this product
  1. 4
  2. 1
  3. 3 stars
    0
  4. 2
  5. 2
Review this product
  • Is its lighting satisfactory?
  • Performance
  • Construction quality
  • Relatively quiet
  • Value for money

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

xeno.zoi
5
3 out of 3 members found this review helpful
xeno.zoi

Verified purchase

The best vacuum cleaner on the market............worth every penny.......

Translated from Greek ·
  • Performance
  • Relatively quiet
  • Construction quality
  • Value for money
Did you find this review helpful?

Kouf1989
2
5 out of 7 members found this review helpful
Kouf1989

Verified purchase

In order to prevent steam from dripping and turning into water, you have to press the "intensive" button, which is the strongest, but it only works for 5 minutes. After that, it returns to the previous intensity and you have to be there every 5 minutes to keep it at the highest level. Otherwise, you have to wipe the water off the tiles and cabinets. The build quality is very good, but for the same price, you can get something better in terms of functionality and efficiency.

Translated from Greek ·
  • Construction quality
  • Performance
  • Noisy
  • Value for money
Did you find this review helpful?
  • giorgos_symeonidis9176
    5
    2 out of 2 members found this review helpful
    giorgos_symeonidis9176

    I combine it with AEG stoves and everything works automatically, you simply open the stoves and the extractor hood receives the command. Quiet with good absorption. Time will show for durability

    Translated from Greek ·
    • Performance
    • Relatively quiet
    • Construction quality
    • Value for money
    • Is its lighting satisfactory?
    Did you find this review helpful?
  • Πουλοτσα
    1
    5 out of 6 members found this review helpful
    Πουλοτσα

    The same goes for me! The red lights blink on their own, the light turns on by itself when it closes, and when it operates. Unacceptable! Not worth it!

    Translated from Greek ·
    • Performance
    • Moderate noise
    • Construction quality
    • Value for money
    Did you find this review helpful?
  • paskitsa
    1
    11 out of 11 members found this review helpful
    paskitsa

    19/12/19: When I bought this specific extractor there was no review on Scroutz and I decided to take the risk (very wrongly). I bought it for 430 euros and although it is stylish and indeed quiet and powerful, I am facing exactly the same problems that the above reviewer mentions...! From the first days, the indicator lights were flashing with a red color at random times and they would only turn off if you pressed the on/off button for a long time (I managed to figure it out because I read the above comment). The manual doesn't say anything at all. One technician says that this is normal operation and I should find the manual, which I told him I have read and it doesn't say anything. Another technician who came said that it is due to the voltage of the socket and generally the electrical installation in a literally brand new renovated kitchen and that luckily the circuit board didn't burn because it costs 200 euros and it's not covered by the warranty (I wonder if the warranty covers anything at all...). At the same time, we also had a problem with the lighting, which was dim from a certain point onwards and didn't respond to the switch. In the end, it was fixed but with a charge because it was considered that we called the technician unnecessarily because the problem was our fault and not the extractor's. The policy of their official service is unacceptable to say the least. In short, I entered my new kitchen full of joy and the disappointment and hassle caused by the extractor were discouraging. They also said that if it happens again and they finally fix it, we will be charged for the repair and transportation, even though we have a warranty. I am writing this review to save anyone else from what I went through. Honestly, do yourself a favor and get another one until at least AEG withdraws it and improves it or at least admits and informs that it only works with AEG hobs to be active for the hob to hood function...!!
    edit 26/12/19: We also installed a voltage stabilizer for the whole house in our panel (we live in Athens and we didn't have any particular problem with the voltage anyway). The problem remains. We come home and the lighting has turned on by itself and the indicators are flashing...
    edit 24/11/20 and finally a positive review: the extractor finally works without any problem because the last technician who came attached a small insulation on the "eye" of the sensor (on the bottom surface under the panel) that detects compatible hobs for the hob to hood function. And after this magical touch, I didn't bother with it again. Apart from this inconvenience, the extractor is fine and does a nice and quiet job...!

    Translated from Greek ·
    • Performance
    • Relatively quiet
    • Construction quality
    • Value for money
    Did you find this review helpful?
  • kourouna_forever
    2
    9 out of 10 members found this review helpful
    kourouna_forever

    Although the absorbency of this specific extractor is very good, especially in turbo mode, the device is defective. And I explain in detail. We bought this model a year ago. From the first days of operation, it displayed the following problems. While it was not in operation, the lights on the screen suddenly started flashing as if it had blocked, and we had to hold down the power button for them to turn off. Also, at random times during the day, the lights of the extractor would turn on by themselves. We contacted the store and they referred us to AEG, where the service was truly unacceptable. They told us once that it picks up infrared signals from another device and blocks, then they said it was the voltage of the power (they told us to install a voltage regulator, which is expensive, even though the house was built a year ago with a new electrical installation!). In the end, the problem is probably that this extractor has a function that only recognizes AEG stoves, and as soon as you turn on the stove, the extractor turns on by itself. So, because we have stoves from another brand, it may block because of that. However, we complained that we did not receive any information that this extractor exclusively requires AEG stoves underneath, as the store sold it independently and did not mention anything related. Initially, AEG did not accept to change the circuit board and they told us the things I mentioned above. Finally, after a lot of pressure, they changed the circuit board once, but the problem was not solved. Now we are waiting for a second circuit board to arrive.

    Finally, the technician came again and made an adjustment (as they told him from AEG) to the circuit board that he had changed for us the previous time, fortunately without any charge, and since then it has not presented any problems again!!! But really, AEG is unacceptable! If I had known, I would have never bought it, even if it has good performance.

    Translated from Greek ·
    • Performance
    • Moderate noise
    • Construction quality
    • Value for money
    Did you find this review helpful?
  • Praxitelis_Vogazianos7711
    5
    Praxitelis_Vogazianos7711

    Verified purchase

    This review is about the width: 90 cm

    • Performance
    • Relatively quiet
    • Construction quality
    • Value for money
    • Is its lighting satisfactory?
  • 4
    FVRT

    Verified purchase

    • Performance
    • Relatively quiet
    • Construction quality
    • Value for money
    • Is its lighting satisfactory?
  • 5
    SaKnitoS

    • Performance
    • Construction quality
    • Value for money
    • Is its lighting satisfactory?
    • Moderate noise
  • giorgos_symeonidis9176
    5
    giorgos_symeonidis9176

    I combine it with AEG stoves and everything works automatically, you simply open the stoves and the extractor hood receives the command. Quiet with good absorption. Time will show for durability

    Translated from Greek ·
    2
  • Πουλοτσα
    1
    Πουλοτσα

    The same goes for me! The red lights blink on their own, the light turns on by itself when it closes, and when it operates. Unacceptable! Not worth it!

    Translated from Greek ·
    5
  • paskitsa
    1
    paskitsa

    19/12/19: When I bought this specific extractor there was no review on Scroutz and I decided to take the risk (very wrongly). I bought it for 430 euros and although it is stylish and indeed quiet and powerful, I am facing exactly the same problems that the above reviewer mentions...! From the first days, the indicator lights were flashing with a red color at random times and they would only turn off if you pressed the on/off button for a long time (I managed to figure it out because I read the above comment). The manual doesn't say anything at all. One technician says that this is normal operation and I should find the manual, which I told him I have read and it doesn't say anything. Another technician who came said that it is due to the voltage of the socket and generally the electrical installation in a literally brand new renovated kitchen and that luckily the circuit board didn't burn because it costs 200 euros and it's not covered by the warranty (I wonder if the warranty covers anything at all...). At the same time, we also had a problem with the lighting, which was dim from a certain point onwards and didn't respond to the switch. In the end, it was fixed but with a charge because it was considered that we called the technician unnecessarily because the problem was our fault and not the extractor's. The policy of their official service is unacceptable to say the least. In short, I entered my new kitchen full of joy and the disappointment and hassle caused by the extractor were discouraging. They also said that if it happens again and they finally fix it, we will be charged for the repair and transportation, even though we have a warranty. I am writing this review to save anyone else from what I went through. Honestly, do yourself a favor and get another one until at least AEG withdraws it and improves it or at least admits and informs that it only works with AEG hobs to be active for the hob to hood function...!!
    edit 26/12/19: We also installed a voltage stabilizer for the whole house in our panel (we live in Athens and we didn't have any particular problem with the voltage anyway). The problem remains. We come home and the lighting has turned on by itself and the indicators are flashing...
    edit 24/11/20 and finally a positive review: the extractor finally works without any problem because the last technician who came attached a small insulation on the "eye" of the sensor (on the bottom surface under the panel) that detects compatible hobs for the hob to hood function. And after this magical touch, I didn't bother with it again. Apart from this inconvenience, the extractor is fine and does a nice and quiet job...!

    Translated from Greek ·
    11
  • kourouna_forever
    2
    kourouna_forever

    Although the absorbency of this specific extractor is very good, especially in turbo mode, the device is defective. And I explain in detail. We bought this model a year ago. From the first days of operation, it displayed the following problems. While it was not in operation, the lights on the screen suddenly started flashing as if it had blocked, and we had to hold down the power button for them to turn off. Also, at random times during the day, the lights of the extractor would turn on by themselves. We contacted the store and they referred us to AEG, where the service was truly unacceptable. They told us once that it picks up infrared signals from another device and blocks, then they said it was the voltage of the power (they told us to install a voltage regulator, which is expensive, even though the house was built a year ago with a new electrical installation!). In the end, the problem is probably that this extractor has a function that only recognizes AEG stoves, and as soon as you turn on the stove, the extractor turns on by itself. So, because we have stoves from another brand, it may block because of that. However, we complained that we did not receive any information that this extractor exclusively requires AEG stoves underneath, as the store sold it independently and did not mention anything related. Initially, AEG did not accept to change the circuit board and they told us the things I mentioned above. Finally, after a lot of pressure, they changed the circuit board once, but the problem was not solved. Now we are waiting for a second circuit board to arrive.

    Finally, the technician came again and made an adjustment (as they told him from AEG) to the circuit board that he had changed for us the previous time, fortunately without any charge, and since then it has not presented any problems again!!! But really, AEG is unacceptable! If I had known, I would have never bought it, even if it has good performance.

    Translated from Greek ·
    9
  • Praxitelis_Vogazianos7711
    5
    Praxitelis_Vogazianos7711

    0
  • See all

Description & Specifications

Natural air, easily and quietly

The elegantly designed AEG vent hood discreetly removes odors thanks to the ultra-quiet Breeze technology. This way, you can have a better environment in your kitchen, quietly and effortlessly.

Hob2Hood

The Hob2Hood automatically controls the power level and lights of the vent hood, allowing you to focus on the details of proper food preparation.

A powerful motor for cleaner air in the kitchen

Whether you're frying steak or sautéing salmon, the high-performance motor ensures that the air in your kitchen stays fresh. Relax, knowing that your kitchen will always be a pleasant and welcoming environment.

LEDlights

Our LEDlights require much less energy than other types of lighting and have a longer lifespan. They provide professional lighting for greater precision in cooking.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
DBB5660HM

Product Details

Type
Chimney

Type

Chimney
The chimney-style hoods cover the air duct with a decorative element that resembles a chimney.
Retro
No
Grease Filter Material
Charcoal (optional), Metal

Grease Filter Material

Charcoal (optional)

Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


They are not washable and it is recommended to replace them every 4 months.


Their use reduces the efficiency of the range hood by about 30%.

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
Extraction Mode
Extraction or Recirculation

Extraction Mode

Concerns the way in which the extractor absorbs air.

Extraction or Recirculation

The extractor fan has both functions. The air that the extractor fan draws can either be extracted through a pipe or recycled back into the fan. For air extraction function, a pipe is needed to remove the air outside the kitchen.
Dual Motor
No
Type of Control
Touch Keys
Timer Function
No
Filter Cleaning Indicator
Yes
Washable Filter
Yes
Colour
Inox

Technical Features

Extraction Power (Max)
352 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.
Extraction Power (Boost)
779 m³/h

Extraction Power (Boost)

The boost power enhances absorption even more for a short period of time. After a while, it returns to maximum absorption.


The function is ideal for odors during frying and grilling.

Dimensions

Width
60 cm
Length
50 cm

Energy Label

Energy Class
A

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
58 kWh/y
Extraction Flow Efficiency
A

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
A

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
C

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
55 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (9)

3.4
9
3.4
Review this product
  1. 4
  2. 1
  3. 3 stars
    0
  4. 2
  5. 2
Review this product
  • Is its lighting satisfactory?
  • Performance
  • Construction quality
  • Relatively quiet
  • Value for money

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

xeno.zoi
5
3 out of 3 members found this review helpful
xeno.zoi

Verified purchase

The best vacuum cleaner on the market............worth every penny.......

Translated from Greek ·
  • Performance
  • Relatively quiet
  • Construction quality
  • Value for money
Did you find this review helpful?

Kouf1989
2
5 out of 7 members found this review helpful
Kouf1989

Verified purchase

In order to prevent steam from dripping and turning into water, you have to press the "intensive" button, which is the strongest, but it only works for 5 minutes. After that, it returns to the previous intensity and you have to be there every 5 minutes to keep it at the highest level. Otherwise, you have to wipe the water off the tiles and cabinets. The build quality is very good, but for the same price, you can get something better in terms of functionality and efficiency.

Translated from Greek ·
  • Construction quality
  • Performance
  • Noisy
  • Value for money
Did you find this review helpful?
  • giorgos_symeonidis9176
    5
    2 out of 2 members found this review helpful
    giorgos_symeonidis9176

    I combine it with AEG stoves and everything works automatically, you simply open the stoves and the extractor hood receives the command. Quiet with good absorption. Time will show for durability

    Translated from Greek ·
    • Performance
    • Relatively quiet
    • Construction quality
    • Value for money
    • Is its lighting satisfactory?
    Did you find this review helpful?
  • Πουλοτσα
    1
    5 out of 6 members found this review helpful
    Πουλοτσα

    The same goes for me! The red lights blink on their own, the light turns on by itself when it closes, and when it operates. Unacceptable! Not worth it!

    Translated from Greek ·
    • Performance
    • Moderate noise
    • Construction quality
    • Value for money
    Did you find this review helpful?
  • paskitsa
    1
    11 out of 11 members found this review helpful
    paskitsa

    19/12/19: When I bought this specific extractor there was no review on Scroutz and I decided to take the risk (very wrongly). I bought it for 430 euros and although it is stylish and indeed quiet and powerful, I am facing exactly the same problems that the above reviewer mentions...! From the first days, the indicator lights were flashing with a red color at random times and they would only turn off if you pressed the on/off button for a long time (I managed to figure it out because I read the above comment). The manual doesn't say anything at all. One technician says that this is normal operation and I should find the manual, which I told him I have read and it doesn't say anything. Another technician who came said that it is due to the voltage of the socket and generally the electrical installation in a literally brand new renovated kitchen and that luckily the circuit board didn't burn because it costs 200 euros and it's not covered by the warranty (I wonder if the warranty covers anything at all...). At the same time, we also had a problem with the lighting, which was dim from a certain point onwards and didn't respond to the switch. In the end, it was fixed but with a charge because it was considered that we called the technician unnecessarily because the problem was our fault and not the extractor's. The policy of their official service is unacceptable to say the least. In short, I entered my new kitchen full of joy and the disappointment and hassle caused by the extractor were discouraging. They also said that if it happens again and they finally fix it, we will be charged for the repair and transportation, even though we have a warranty. I am writing this review to save anyone else from what I went through. Honestly, do yourself a favor and get another one until at least AEG withdraws it and improves it or at least admits and informs that it only works with AEG hobs to be active for the hob to hood function...!!
    edit 26/12/19: We also installed a voltage stabilizer for the whole house in our panel (we live in Athens and we didn't have any particular problem with the voltage anyway). The problem remains. We come home and the lighting has turned on by itself and the indicators are flashing...
    edit 24/11/20 and finally a positive review: the extractor finally works without any problem because the last technician who came attached a small insulation on the "eye" of the sensor (on the bottom surface under the panel) that detects compatible hobs for the hob to hood function. And after this magical touch, I didn't bother with it again. Apart from this inconvenience, the extractor is fine and does a nice and quiet job...!

    Translated from Greek ·
    • Performance
    • Relatively quiet
    • Construction quality
    • Value for money
    Did you find this review helpful?
  • kourouna_forever
    2
    9 out of 10 members found this review helpful
    kourouna_forever

    Although the absorbency of this specific extractor is very good, especially in turbo mode, the device is defective. And I explain in detail. We bought this model a year ago. From the first days of operation, it displayed the following problems. While it was not in operation, the lights on the screen suddenly started flashing as if it had blocked, and we had to hold down the power button for them to turn off. Also, at random times during the day, the lights of the extractor would turn on by themselves. We contacted the store and they referred us to AEG, where the service was truly unacceptable. They told us once that it picks up infrared signals from another device and blocks, then they said it was the voltage of the power (they told us to install a voltage regulator, which is expensive, even though the house was built a year ago with a new electrical installation!). In the end, the problem is probably that this extractor has a function that only recognizes AEG stoves, and as soon as you turn on the stove, the extractor turns on by itself. So, because we have stoves from another brand, it may block because of that. However, we complained that we did not receive any information that this extractor exclusively requires AEG stoves underneath, as the store sold it independently and did not mention anything related. Initially, AEG did not accept to change the circuit board and they told us the things I mentioned above. Finally, after a lot of pressure, they changed the circuit board once, but the problem was not solved. Now we are waiting for a second circuit board to arrive.

    Finally, the technician came again and made an adjustment (as they told him from AEG) to the circuit board that he had changed for us the previous time, fortunately without any charge, and since then it has not presented any problems again!!! But really, AEG is unacceptable! If I had known, I would have never bought it, even if it has good performance.

    Translated from Greek ·
    • Performance
    • Moderate noise
    • Construction quality
    • Value for money
    Did you find this review helpful?
  • Praxitelis_Vogazianos7711
    5
    Praxitelis_Vogazianos7711

    Verified purchase

    This review is about the width: 90 cm

    • Performance
    • Relatively quiet
    • Construction quality
    • Value for money
    • Is its lighting satisfactory?
  • 4
    FVRT

    Verified purchase

    • Performance
    • Relatively quiet
    • Construction quality
    • Value for money
    • Is its lighting satisfactory?
  • 5
    SaKnitoS

    • Performance
    • Construction quality
    • Value for money
    • Is its lighting satisfactory?
    • Moderate noise
  • giorgos_symeonidis9176
    5
    giorgos_symeonidis9176

    I combine it with AEG stoves and everything works automatically, you simply open the stoves and the extractor hood receives the command. Quiet with good absorption. Time will show for durability

    Translated from Greek ·
    2
  • Πουλοτσα
    1
    Πουλοτσα

    The same goes for me! The red lights blink on their own, the light turns on by itself when it closes, and when it operates. Unacceptable! Not worth it!

    Translated from Greek ·
    5
  • paskitsa
    1
    paskitsa

    19/12/19: When I bought this specific extractor there was no review on Scroutz and I decided to take the risk (very wrongly). I bought it for 430 euros and although it is stylish and indeed quiet and powerful, I am facing exactly the same problems that the above reviewer mentions...! From the first days, the indicator lights were flashing with a red color at random times and they would only turn off if you pressed the on/off button for a long time (I managed to figure it out because I read the above comment). The manual doesn't say anything at all. One technician says that this is normal operation and I should find the manual, which I told him I have read and it doesn't say anything. Another technician who came said that it is due to the voltage of the socket and generally the electrical installation in a literally brand new renovated kitchen and that luckily the circuit board didn't burn because it costs 200 euros and it's not covered by the warranty (I wonder if the warranty covers anything at all...). At the same time, we also had a problem with the lighting, which was dim from a certain point onwards and didn't respond to the switch. In the end, it was fixed but with a charge because it was considered that we called the technician unnecessarily because the problem was our fault and not the extractor's. The policy of their official service is unacceptable to say the least. In short, I entered my new kitchen full of joy and the disappointment and hassle caused by the extractor were discouraging. They also said that if it happens again and they finally fix it, we will be charged for the repair and transportation, even though we have a warranty. I am writing this review to save anyone else from what I went through. Honestly, do yourself a favor and get another one until at least AEG withdraws it and improves it or at least admits and informs that it only works with AEG hobs to be active for the hob to hood function...!!
    edit 26/12/19: We also installed a voltage stabilizer for the whole house in our panel (we live in Athens and we didn't have any particular problem with the voltage anyway). The problem remains. We come home and the lighting has turned on by itself and the indicators are flashing...
    edit 24/11/20 and finally a positive review: the extractor finally works without any problem because the last technician who came attached a small insulation on the "eye" of the sensor (on the bottom surface under the panel) that detects compatible hobs for the hob to hood function. And after this magical touch, I didn't bother with it again. Apart from this inconvenience, the extractor is fine and does a nice and quiet job...!

    Translated from Greek ·
    11
  • kourouna_forever
    2
    kourouna_forever

    Although the absorbency of this specific extractor is very good, especially in turbo mode, the device is defective. And I explain in detail. We bought this model a year ago. From the first days of operation, it displayed the following problems. While it was not in operation, the lights on the screen suddenly started flashing as if it had blocked, and we had to hold down the power button for them to turn off. Also, at random times during the day, the lights of the extractor would turn on by themselves. We contacted the store and they referred us to AEG, where the service was truly unacceptable. They told us once that it picks up infrared signals from another device and blocks, then they said it was the voltage of the power (they told us to install a voltage regulator, which is expensive, even though the house was built a year ago with a new electrical installation!). In the end, the problem is probably that this extractor has a function that only recognizes AEG stoves, and as soon as you turn on the stove, the extractor turns on by itself. So, because we have stoves from another brand, it may block because of that. However, we complained that we did not receive any information that this extractor exclusively requires AEG stoves underneath, as the store sold it independently and did not mention anything related. Initially, AEG did not accept to change the circuit board and they told us the things I mentioned above. Finally, after a lot of pressure, they changed the circuit board once, but the problem was not solved. Now we are waiting for a second circuit board to arrive.

    Finally, the technician came again and made an adjustment (as they told him from AEG) to the circuit board that he had changed for us the previous time, fortunately without any charge, and since then it has not presented any problems again!!! But really, AEG is unacceptable! If I had known, I would have never bought it, even if it has good performance.

    Translated from Greek ·
    9
  • Praxitelis_Vogazianos7711
    5
    Praxitelis_Vogazianos7711

    0
  • See all