Skroutz.mt

Vitex Vito Elastomeric Acrylic Sealant 3lt White
Insulating & Sealing Materials

Vitex Vito Elastomeric Acrylic Sealant 3lt White

Vitex Vito elastomeric acrylic waterproofing coating is designed for waterproofing roofs and remains flexible from -20 °C to +100 °C. It adheres to concrete, brick, wood and metal surfaces, and...

Vitex Vito elastomeric acrylic waterproofing coating is designed for waterproofing roofs and remains flexible from -20 °C to +100 °C. It adheres to concrete, brick, wood and metal surfaces, and withstands weather conditions, ultraviolet radiation and temperature fluctuations. It is certified as a cool roof coating.

Apply two crosswise coats, allowing at...

See full description See full description

Top specs

See all
  • Capacity 3 lt
  • Application Surface Terrace

Capacity

  1. 3 lt

    from 13,50 €

  2. 9 lt

    from 38,00 €

The product is not available for shipping to the selected country.

Reviews (2)

Reviews

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • sotiriosdepountis75
    5
    1 out of 1 members found this review helpful
    sotiriosdepountis75
    This review is about the capacity: 9 lt

    I got it on sale from the hardware store. As a material, it spreads relatively easily. I applied it on a terrace over a bituminous membrane that had started to peel off. I applied one coat of primer and then sprayed it with water as the description says. And after it dries, another coat as it is with a good mix. For 120 square meters, I bought 7 buckets, 2 coats, and everything is fine. Value for money, material.
    The only thing that bothered me was the tack-free that it has afterwards. It is a cold color and does what it says. Now time will tell.

    Translated from Greek ·
    • Value for money
    • Does it dry quickly?
    • Does it spread easily?
    Did you find this review helpful?
  • 5
    Dim_Dim40

    Verified purchase

  • sotiriosdepountis75
    5
    sotiriosdepountis75

    I got it on sale from the hardware store. As a material, it spreads relatively easily. I applied it on a terrace over a bituminous membrane that had started to peel off. I applied one coat of primer and then sprayed it with water as the description says. And after it dries, another coat as it is with a good mix. For 120 square meters, I bought 7 buckets, 2 coats, and everything is fine. Value for money, material.
    The only thing that bothered me was the tack-free that it has afterwards. It is a cold color and does what it says. Now time will tell.

    Translated from Greek ·
    1
  • 5
    Dim_Dim40

    0
  • See all
Product report

Description & Specifications

Vitex Vito elastomeric acrylic waterproofing coating is designed for waterproofing roofs and remains flexible from -20 °C to +100 °C. It adheres to concrete, brick, wood and metal surfaces, and withstands weather conditions, ultraviolet radiation and temperature fluctuations. It is certified as a cool roof coating.

Apply two crosswise coats, allowing at least 24 hours between coats. Dilute the first coat with 5% water; apply the second coat undiluted. The surface must be clean, dry and smooth, free of dust and loose material, and primed with Durovit diluted with 30% Brush Thinner T 300. Do not apply at temperatures below 5 °C or above 35 °C, at relative humidity above 70%, or when rain or frost is expected within the next 48 hours. Touch-dry in 2–3 hours; recoat after 24–48 hours, depending on weather conditions.

  • Type: Elastomeric acrylic waterproofing coating
  • Form: Brush-on liquid
  • Capacity: 3 lt
  • Colour: White
  • Application surface: Roof
  • Suitable surfaces: Concrete, brick, wood, metal and bituminous membrane
  • Application: Two crosswise coats applied with a roller, brush or airless spray gun
  • Time between coats: At least 24 hours
  • First-coat dilution: 5% with water
  • Second-coat dilution: Undiluted
  • Touch-dry time: 2–3 hours
  • Recoat time: 24–48 hours
  • Initial total solar reflectance: SR = 0.84 (300–2500 nm), according to ASTM E 903-96 and ASTM G 159-98
  • Infrared emittance: ε = 0.89, according to ASTM E 408-71-2002
  • Solar Reflectance Index: SRI = 106, according to ASTM E 1980-01
  • Tool cleaning: Immediately after use with water and, if necessary, soap or detergent

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Lubricating Liquid
Colour
White
Application Surface
Terrace
Application Surface Material
Brick, Metallic, Bituminous Membrane, Concrete

Additional Specifications

Polyurethane
No
Elastomer
Yes
Acrylic
Yes
Bituminous
No
Cementitious
No
2-Component
No

Packaging

Capacity
3 lt

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • sotiriosdepountis75
    5
    1 out of 1 members found this review helpful
    sotiriosdepountis75
    This review is about the capacity: 9 lt

    I got it on sale from the hardware store. As a material, it spreads relatively easily. I applied it on a terrace over a bituminous membrane that had started to peel off. I applied one coat of primer and then sprayed it with water as the description says. And after it dries, another coat as it is with a good mix. For 120 square meters, I bought 7 buckets, 2 coats, and everything is fine. Value for money, material.
    The only thing that bothered me was the tack-free that it has afterwards. It is a cold color and does what it says. Now time will tell.

    Translated from Greek ·
    • Value for money
    • Does it dry quickly?
    • Does it spread easily?
    Did you find this review helpful?
  • 5
    Dim_Dim40

    Verified purchase

  • sotiriosdepountis75
    5
    sotiriosdepountis75

    I got it on sale from the hardware store. As a material, it spreads relatively easily. I applied it on a terrace over a bituminous membrane that had started to peel off. I applied one coat of primer and then sprayed it with water as the description says. And after it dries, another coat as it is with a good mix. For 120 square meters, I bought 7 buckets, 2 coats, and everything is fine. Value for money, material.
    The only thing that bothered me was the tack-free that it has afterwards. It is a cold color and does what it says. Now time will tell.

    Translated from Greek ·
    1
  • 5
    Dim_Dim40

    0
  • See all