Skroutz.mt

Stagg UHF WRLSS 2LAVALIER864.2-864.7 Set Wireless Δυναμικό Microphone Pendant, Clip On, Belt for Vocals
Microphones

Stagg UHF WRLSS 2LAVALIER864.2-864.7 Set Wireless Δυναμικό Microphone Pendant, Clip On, Belt for Vocals

The set includes a dual fixed receiver, 2 portable bodypack transmitters each with a preset frequency, and 2 lapel capsules.

The receiver has two independent outputs, one for each channel, with...

The set includes a dual fixed receiver, 2 portable bodypack transmitters each with a preset frequency, and 2 lapel capsules.

The receiver has two independent outputs, one for each channel, with adjustable volume levels. A hard carrying case is included.

Frequencies: 864.2 and 864.7

Important note: Only one two-channel system can be used at a time.

  • Receiver:...
See full description See full description
  • Usage Vocals, Presentations & Theatre, Musical Instruments
  • Placement Pendant, Clip On, Belt
  • Connectivity RF, UHF, XLR, 6.35mm
  • See all
68 22 €
Delivery Thu, 16 Jul - Wed, 22 Jul
14,00 €   shipping cost
Sent from Greece
From E-gate 4.9 (109)
4.9 (109 reviews)
Greece
5 pieces
See Audio on the page of E-gate
Review the product
Product report

Description

Description

The set includes a dual fixed receiver, 2 portable bodypack transmitters each with a preset frequency, and 2 lapel capsules.

The receiver has two independent outputs, one for each channel, with adjustable volume levels. A hard carrying case is included.

Frequencies: 864.2 and 864.7

Important note: Only one two-channel system can be used at a time.

  • Receiver: Frequency Oscillation Mode PLL UHF Synthesized
  • Frequency space: 1KHz
  • Band width: 2MHz
  • Frequency response: 50Hz-15KHz
  • Range: 60 meters
  • Stability: ± 0.005% (-10 ° C - + 50 ° C)
  • Image Interference Ratio: > 80dB
  • S/N ratio: > 90dB
  • Sensitivity: -105dB (12dB S/N AD)
  • T.H.D Modulation Mode: FM
  • Power supply: DC 12-18V 350mA
  • Power consumption: 4W
  • Audio Output: unbalanced 6.3mm phone jack 550mV ±35KHz
  • Belt-Pack Transmitter
  • Frequency range: 500-980 MHz
  • RF transmission power: 10 mW
  • Battery type: 2 x AA battery 1.5 V
  • Frequency response: 50 - 20,000 Hz
  • Input sensitivity: 2.1 mV / Pa
  • Consumption: 100 mA at 3 V

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Mode of Operation
Dynamic

Mode of Operation

Dynamic

Durable microphone that does not require power supply. Ideal for live performances and loud sound sources (vocals, drums, amplifiers).
Max SPL
105 dB

Max SPL

Max SPL (Maximum Sound Pressure Level) is the maximum sound pressure level (in dB) that a microphone can withstand before it starts to distort the sound.

  • High Max SPL (e.g., 140-160dB): Ideal for recording loud sources such as drums, amplified guitar, or live concerts.
  • Lower Max SPL (e.g., 120dB): Suitable for vocals and softer recordings.

The higher the Max SPL, the louder the sounds it can capture without distortion.
Signal-to-Noise Ratio (SNR)
80 dB

Signal-to-Noise Ratio (SNR)

Indicates the difference between the useful signal and the microphone's noise. The higher the value in dB, the clearer the sound. A microphone with a low SNR may sound “noisy,” especially in quiet environments or when recording low-volume sounds. On the other hand, a high SNR means that noise is minimal compared to the sound you want to capture, offering a more professional, clear, and detailed result—ideal for studio, vocals, or high-quality recording.

  • 35 – 60 dB (Low SNR): Noticeable noise is present. Suitable for casual use or loud sources.
  • 60 – 90 dB (Medium SNR): Good signal-to-noise balance. Suitable for live performances and general use.
  • 90 – 110 dB (High SNR): Very clear signal with minimal noise. Ideal for studio, vocals, and high-quality recording.
Connectivity
RF, UHF, XLR, 6.35mm

General Characteristics

Device Group
Vocals, Presentations & Theatre, Musical Instruments
Placement
Pendant, Clip On, Belt
Vintage
No
Set
Yes
Color
Black

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The set includes a dual fixed receiver, 2 portable bodypack transmitters each with a preset frequency, and 2 lapel capsules.

The receiver has two independent outputs, one for each channel, with adjustable volume levels. A hard carrying case is included.

Frequencies: 864.2 and 864.7

Important note: Only one two-channel system can be used at a time.

  • Receiver: Frequency Oscillation Mode PLL UHF Synthesized
  • Frequency space: 1KHz
  • Band width: 2MHz
  • Frequency response: 50Hz-15KHz
  • Range: 60 meters
  • Stability: ± 0.005% (-10 ° C - + 50 ° C)
  • Image Interference Ratio: > 80dB
  • S/N ratio: > 90dB
  • Sensitivity: -105dB (12dB S/N AD)
  • T.H.D Modulation Mode: FM
  • Power supply: DC 12-18V 350mA
  • Power consumption: 4W
  • Audio Output: unbalanced 6.3mm phone jack 550mV ±35KHz
  • Belt-Pack Transmitter
  • Frequency range: 500-980 MHz
  • RF transmission power: 10 mW
  • Battery type: 2 x AA battery 1.5 V
  • Frequency response: 50 - 20,000 Hz
  • Input sensitivity: 2.1 mV / Pa
  • Consumption: 100 mA at 3 V

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Mode of Operation
Dynamic

Mode of Operation

Dynamic

Durable microphone that does not require power supply. Ideal for live performances and loud sound sources (vocals, drums, amplifiers).
Max SPL
105 dB

Max SPL

Max SPL (Maximum Sound Pressure Level) is the maximum sound pressure level (in dB) that a microphone can withstand before it starts to distort the sound.

  • High Max SPL (e.g., 140-160dB): Ideal for recording loud sources such as drums, amplified guitar, or live concerts.
  • Lower Max SPL (e.g., 120dB): Suitable for vocals and softer recordings.

The higher the Max SPL, the louder the sounds it can capture without distortion.
Signal-to-Noise Ratio (SNR)
80 dB

Signal-to-Noise Ratio (SNR)

Indicates the difference between the useful signal and the microphone's noise. The higher the value in dB, the clearer the sound. A microphone with a low SNR may sound “noisy,” especially in quiet environments or when recording low-volume sounds. On the other hand, a high SNR means that noise is minimal compared to the sound you want to capture, offering a more professional, clear, and detailed result—ideal for studio, vocals, or high-quality recording.

  • 35 – 60 dB (Low SNR): Noticeable noise is present. Suitable for casual use or loud sources.
  • 60 – 90 dB (Medium SNR): Good signal-to-noise balance. Suitable for live performances and general use.
  • 90 – 110 dB (High SNR): Very clear signal with minimal noise. Ideal for studio, vocals, and high-quality recording.
Connectivity
RF, UHF, XLR, 6.35mm

General Characteristics

Device Group
Vocals, Presentations & Theatre, Musical Instruments
Placement
Pendant, Clip On, Belt
Vintage
No
Set
Yes
Color
Black

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

68,22 €
14,00 €   shipping cost