car polishing did a very good job in combination with the appropriate sponge, the sponges included inside do nothing, I would recommend the green 3m sponge which for me did an excellent job in combination with the machine, and a good polish

Very value for money polisher. It doesn't stall easily. I replaced the 6-inch 150 plate with a 5-inch 125. Incredible combination. With a good set of pads and polishes you get a professional result

Guys, good evening. I would like your help; I am looking for a 5mm plate that fits this bull because the plate it has is 6mm and it's a bit big

With 5-inch platters and good sponges with good polishes, you can achieve a professional result

I have had it for two years, I have polished several cars and as I gain experience, I see where it lacks. I have changed the grease and bought a smaller plate. It has quite a few vibrations, but a hobbyist or a small professional will do their job without any problems. If it had a bit more power, it would have no competition for the price.

Well, this war dog really worked tirelessly for 6 hours and didn't understand anything! It definitely needs a change of grease with high-temperature lithium (I used mag1) and a 5-inch plate (3011125 maxshine) and 5-inch maxhine pads.

Update 17/9, I have literally melted it for about 7 hours, it doesn't understand a thing, guys. Very happy with the purchase

I received a new one from the box the day before yesterday. I did some work, stopped for 3 hours, and when I tried to start again to polish, it worked for 30 seconds and then stopped.
Update: I received the polisher back from the service with the explanation of replacing the switch. I didn't have any issues with the dealership, although I didn't like that they didn't replace it and just repaired it. It's a machine that worked for 30 minutes. I won't bother anymore, I got frustrated once (not to mention that they sent it to me by courier and I had to drive 25 kilometers further to pick it up with a delivery cost of 4€)

I was reading the comments and I bought it. I used it 3-4 times, it didn't break or have any issues, but it's like a wheel that you use to rub something... it's not a polisher, this thing. If you see a professional polisher, you will understand that this thing here is like a toy... almost a waste of 100 euros plus shipping.

For the money, it is fantastic. I replaced the plate with a smaller one and added better grease. I have done 2 cars so far and I have the best impressions

Very good machine easy to use. I replaced the plate from 150 to 125 as well as the grease for better results

It broke after 1 year with minimal use, 2-3 times. It started changing speeds on its own without working as it should be adjusted

Maguiars cutting and polishing compounds, 15 foam pads from Maxshine, green for cutting and yellow for polishing. One pass with a microfiber cloth and mirror. Very satisfied for the first time and inexperienced amateur. 3 hours for the whole car. But I don't remember ever seeing it so beautifully polished. It's worth it. Definitely the yellow one it comes with is not good. Get good quality pads. It didn't tire me out.

For its price, it is very good. It has a bit of shaking, but I believe that replacing the plate with a smaller one will fix it. What really bothered me was the cable. That's why I deducted one star. Is it possible, guys, that in a tool meant for polishing and waxing cars, the factory has put in less than two meters of cable? Are we serious? The extension cord has to be at your feet to reach the middle of the sky and touching the car. Come on. I opened mine, cut the 2x0.75 cable of the plate, and put in four meters of soft silicone cable 3x1.5. Now it reaches everywhere comfortably and without the risk of damaging my car.
Update 03/08/2024.
Guys, I changed the plate from 150 to 125, and now there is no shaking at all. I have also bought very good quality pads, and the tool is flying!!!!!!!!!!

Very good sander for amateur use and maybe semi-professional. I have done 5-6 repairs and they have all turned out very good. The 150mm plate is quite large and the sponges it has inside are simply useless. However, as a machine, it is very decent, it just shakes a lot and gets tiring after 2-4 hours of use.

Given its low price, it is an amazing tool. Replacing the plate with a 5" one and changing the cheap Chinese grease with high-temperature lithium red grease, it competes with much more expensive machines. Very good balance and ergonomic handle. Satisfactory weight. As for the noise, I don't think it is at high levels.

The polish is very good, I have used it to polish 6 cars for about 4-5 hours each time and it left me satisfied. I highly recommend it.

5-6 hours of continuous operation and it didn't flinch!
It heats up but doesn't stall. I can't compare it to higher-end and more expensive DA's in terms of weight and vibrations because it's the only one I've used, but it didn't tire me out. Thick 3M compound with wool and fine with a soft sponge and my 2003 car looks almost brand new.

I bought it 2 years ago and I use it quite often to polish my own car or friends' cars. I am completely satisfied with its power and durability. It competes equally with much more expensive, professional polishers that cost 500 euros. Personally, I use it with Meguiars cutting/polishing/waxing sponges and the corresponding polishes, and I am completely satisfied with the result. I hope it will last, even though for the price it is sold, you can buy the same one again and be fine. Highly recommended!

I have it in my possession for 1.5 years now. Eccentric, ideal for beginners, ideal for polishing and waxing. So far, it has been a beast with use on over 30 cars, absolutely no problems. Limited capabilities... but as my friend says, it's not a rupes!!! Besides, for an eccentric polisher at €89, there is nothing else. Value for money... Buy it without hesitation!!!!

Very good for its price. The only disadvantage is that it makes a little more noise than expensive polishers.

For its price, it is excellent (€89). I have been using it for about 2 years now and it does a very good job in combination with a DA or rotary depending on the job we want to do...
Advantages:
A very good solution for beginners.
Covers a larger surface area than the rotary polisher, faster polishing.
Ideal for wax and fine compound applications.
Does not leave holograms and "spiders".

Disadvantages:
Does not easily remove deep scratches.
Cannot be used after wet sanding.

Copy of a much more expensive dual action that does its job excellently, especially at this price (€89).

We reached 2026 and it still shines... So, the machine is simply flawless... Always in relation to the price, right...? It's not a Rupes... For finishing, which is what I got it for, it's wonderful since I use a rotary Rupes for cutting... Lightweight... And if it had a 135mm plate it would be more convenient... How long will it last?? "We're here, we'll see... We paid €89, let's not go crazy.... So, February 2020.... It's a beast, I won't say anything else.
So, we've reached February 2022, still here.... Of course, I've bought a 5" plate and pads.... Vfm