The Adastra RM1202 installation mixer-amplifier has two independent output zones, each rated at 120 W, and supports 100 V or 4/8 Ohm speakers. Its five inputs and built-in USB/SD/FM player with Bluetooth receiver can be routed independently to either zone. It is designed for installations that require independent paging and audio playback in two zones.

Mic/Line channel 1 has variable override and switchable +20 V phantom power for condenser microphones. The amplifier can also be configured as a 100 V stereo amplifier.

• Type: Integrated installation mixer-amplifier
• Output zones: 2
• Output power: 2 x 120 W RMS
• Speaker operation: 100 V, 8 Ohms or 4 Ohms
• Inputs: 1 x XLR microphone, 2 x Jack microphone/line, 2 x RCA line
• Line outputs: 2 x RCA
• Speaker outputs: 2 x 100 V/8 Ohms/4 Ohms/com terminals
• Audio playback: USB/SD/FM
• Bluetooth: Version 2.1
• Phantom power: Switchable, +20 V on XLR Mic 1
• Channel priority: Switchable for channel 1
• Frequency response: 100 Hz–20 kHz
• THD: <0.76% at 1 kHz
• Input impedance: 1 kOhm for microphone/line
• Input sensitivity: -11 dB for line, -46 dB for microphone
• Signal-to-noise ratio: 84 dB for line, 82 dB for microphone
• Power supply: 110–230 V AC, 50/60 Hz (IEC)
• Dimensions: 483 x 320 x 88 mm
• Weight: 11.24 kg