The second one I buy (for my other car), the first one I have had for over 6 years and despite the Greek summer it hasn't budged an inch. It really is worth its money.

The Baseus mounts are very high quality, I have 3 and the few times my phone has fallen were on dirt roads with potholes and elevation differences!

Unfortunately, in my car it didn't stick either the first time or the second time. I cleaned two different areas first but the base did not stick well at all. It probably happens because the surface of the dashboard is somewhat rough (yaris 2019)

To settle on this mount, I changed about 2 to 3 different ones. This particular mount, apart from sticking and being installed easily on the dashboard, holds the phone (Poco X7 Pro) excellently, which I also have in a Rugged Armor case, something that adds extra weight to the device.

I have had it for about a month, so far it is fine, it has stuck well in its place and offers me good visibility on the screen.

It does what it promises. Top-notch for the money you spend. I've had it for 3 years in a spot on the dashboard where it gets sun exposure and it hasn't deteriorated at all. To remove it, not a chance!

Good and stable, I would like the disc to have a slightly larger diameter to hold the phone better.

Not all magnets of this type are the same. This one is among the strongest, and the pivot point is sturdy enough to hold the phone easily (Samsung S24 Ultra)

It was placed on the top of the dashboard in a Corolla and so far it remains in place without coming off despite the weight of the phone, just at the point where it will be placed it should be clean (without dust, etc.) and the surface should be as flat as possible.
Its magnet is very strong and holds the phone very well as long as it is in good contact with the magnet of the phone so that it does not come off with vibrations. No problem with potholes even though the magnet is inside the case.
Now, when attaching the magnet to the phone (depending on the case and its color), you can place it either from the outside or from the inside (depending on your preference), just be careful because the thickness of the case affects how strongly the two magnets will stick together.
Overall, it is a very nice and practical accessory for the car and I highly recommend it!

good quality, good magnet but didn't stick for even 5 minutes on a smooth surface and without the phone....

Having already tried the base, I bought it again for the second time. Great value for money! Stable within reasonable limits for Greek roads, although the solution for "off-road" is for the base to be slightly tilted backwards so that the phone is not vertical. I am referring to stability both with magsafe and with the adhesive magnets that come with the base. Highly recommended!

Stuck on top of the air conditioning controls in a FIAT PANDA '07, it lasted only three weeks. It came off at 32 degrees C. When it was stuck, it was stable only when the metal base was stuck outside the phone case

While I have purchased the same product in silver color in the past, this one is not tight in terms of rotating the phone. As a result, when driving, the phone leans downwards and requires lifting to see the screen.
The solution I tried was to remove the black plastic, which is not glued, it comes off relatively easily, remove the 4 magnets and tighten the three screws that the base has.
Repositioning the black plastic is a bit difficult but nothing special. You put the magnets in a cross shape and then the plastic.
After this, the situation improved considerably.
Overall, I am very satisfied with Baseus products, I was just unlucky in this particular case.

The magnet is quite good and the phone remains quite stable. However, the base does not stick at all on the car dashboard and you need to use special adhesive to make it stick.

Sturdy base. At almost 90 degrees tilt in relation to the ground, the mobile has never fallen during city use.

I have changed from suction cups to 2-3 magnetic bases. This base has 4 magnets, so I recommend it. The same company also offers a similar one with 2 magnets. Very stable, the best option. I have bought two, one for each car. Excellent.

It has a very strong magnet, it is small in size, the phone does not fall off while driving or on bumps

It has a strong magnet, but its adhesive doesn't stick everywhere. I had to use 3M double-sided tape on a leather surface to make it stick because its own adhesive didn't stick at all!

Tremendously sturdy and discreet compared to other stands. A major advantage is the support on the dashboard instead of the air vents, which usually become unstable and break over time due to the weight and constant removal and insertion. Compared to cheap imitations sold for 3-5 euros, here it is worth giving 10 and getting something much more high-quality.

Flawless, the only thing is that in the packaging of the baseus there is a stainless steel plate and a black leather-coated one which is bulky. I would prefer 2 thin black plates

First of all, I have a Samsung s7 edge with a Spigen case which I consider to be of large size. This specific mount has a very good and strong grip (I permanently have the case on the phone because the back is made of glass and it slips) - it doesn't move even on potholes on the road. It is very small so it can be placed anywhere and it has very good adhesive (it also has a second adhesive in case you want to change the position of the mount). Nice design, I recommend it!

Update 27/9/20 I still have it, it still holds very well (maybe now not so much with the case - just the phone) overall I had the car in the sun for 2 summers and it didn't suffer any damage. Very good product. Well done!

It is an excellent solution for those who are tired of mounts that go into the cabin air vents or bulky and ugly plastic mounts that stick to the window and you never know when they will fall off. Firstly, the product is very beautiful and elegant. Secondly, its installation is really easy. Before sticking it, it would be good to see with your hand where it fits and where it doesn't. With this logic, you should see where to stick the magnetic surface on your phone so that it sits correctly overall. This is the only compromise you have to make, to stick a round plate on your phone. Functionally, it is really the best. The phone sticks firmly to the base and comes out just as easily when you want it to. As long as it stays on the base, it remains in place without moving. The package contains 2 of these. One is black with a plastic coating and the other is "naked" as it also has a second adhesive for the base in case you need to remove it.