Skroutz.mt

Metabo SE 17-200 RT Set Electric Multi-Sander 1700W with Speed Control and with Suction System 602259500
Sanders

Metabo SE 17-200 RT Set Electric Multi-Sander 1700W with Speed Control and with Suction System 602259500

SE 17-200 RT Set Satin Finisher 1700W

Features

  • Nominal power: 1,700 W
  • Output power: 1,070 W
  • Torque: 17 Nm
  • No-load speed: 800 - 3,000/min
  • Sanding head diameter (mm): 100 - 200
  • Sanding head width (mm):...

SE 17-200 RT Set Satin Finisher 1700W

Features

  • Nominal power: 1,700 W
  • Output power: 1,070 W
  • Torque: 17 Nm
  • No-load speed: 800 - 3,000/min
  • Sanding head diameter (mm): 100 - 200
  • Sanding head width (mm): 50 - 100
  • Weight (without cable): 2.9 kg

Includes

  • Side handle
  • 1 extension roller C56(Ø90x100mm)
  • 3 sanding belts (Ø90x100mm, P80)
  • 1 sanding wheel (Ø105x100mm,...
See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Soft Start

    Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Weight (Net) 2900 gr
  • See all
Review the product
Product report

Description

Description

SE 17-200 RT Set Satin Finisher 1700W

Features

  • Nominal power: 1,700 W
  • Output power: 1,070 W
  • Torque: 17 Nm
  • No-load speed: 800 - 3,000/min
  • Sanding head diameter (mm): 100 - 200
  • Sanding head width (mm): 50 - 100
  • Weight (without cable): 2.9 kg

Includes

  • Side handle
  • 1 extension roller C56(Ø90x100mm)
  • 3 sanding belts (Ø90x100mm, P80)
  • 1 sanding wheel (Ø105x100mm, P280)
  • 1 flap wheel (Ø105x100mm; P80)
  • 1 flap sanding wheel (Ø105x100mm; P180)
  • Metal carrying case

Description

Powerful sanding machine for sanding, satin finishing, brushing, and polishing, e.g., stainless steel. Satin finisher with maximum productivity thanks to the powerful 1,700 Watt motor and high-performance planetary drive system. Ergonomically designed, rubber handle for comfortable and fatigue-free operation. Metabo Marathon motor with patented dust protection for long service life. Vario-Tacho-Constamatic (VTC) full-wave electronic system with thumbwheel for working with customized speed to suit the application material. Under load, the speed remains constant automatically. Spindle lock and tool-free flange nut for quick accessory changes. Quick adjustment of the guard and side handle without tools. Stainless steel support seal for uniform finishing. Overload protection. Electronic soft start. Restart protection: prevents unintentional restart of the machine after a power cut. Carbon brush shutdown for motor protection.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Multi-Sander

Type

Multi-Sander
For smoothing all surfaces with alternating sanding bases.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Net Weight
2900 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
1700 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
3000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
102 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Hard Case
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

SE 17-200 RT Set Satin Finisher 1700W

Features

  • Nominal power: 1,700 W
  • Output power: 1,070 W
  • Torque: 17 Nm
  • No-load speed: 800 - 3,000/min
  • Sanding head diameter (mm): 100 - 200
  • Sanding head width (mm): 50 - 100
  • Weight (without cable): 2.9 kg

Includes

  • Side handle
  • 1 extension roller C56(Ø90x100mm)
  • 3 sanding belts (Ø90x100mm, P80)
  • 1 sanding wheel (Ø105x100mm, P280)
  • 1 flap wheel (Ø105x100mm; P80)
  • 1 flap sanding wheel (Ø105x100mm; P180)
  • Metal carrying case

Description

Powerful sanding machine for sanding, satin finishing, brushing, and polishing, e.g., stainless steel. Satin finisher with maximum productivity thanks to the powerful 1,700 Watt motor and high-performance planetary drive system. Ergonomically designed, rubber handle for comfortable and fatigue-free operation. Metabo Marathon motor with patented dust protection for long service life. Vario-Tacho-Constamatic (VTC) full-wave electronic system with thumbwheel for working with customized speed to suit the application material. Under load, the speed remains constant automatically. Spindle lock and tool-free flange nut for quick accessory changes. Quick adjustment of the guard and side handle without tools. Stainless steel support seal for uniform finishing. Overload protection. Electronic soft start. Restart protection: prevents unintentional restart of the machine after a power cut. Carbon brush shutdown for motor protection.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Multi-Sander

Type

Multi-Sander
For smoothing all surfaces with alternating sanding bases.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Net Weight
2900 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
1700 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
3000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
102 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Hard Case
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

738,00 €
14,00 €   shipping cost