Skroutz.mt

Metabo SXE 150-5.0 BL Electric Eccentric Sander 150mm Electric 350W with Speed Control 615050000
Sanders

Metabo SXE 150-5.0 BL Electric Eccentric Sander 150mm Electric 350W with Speed Control 615050000 Code: 615050000

SXE 150-5.0 BL Orbital Sander 350W

Specifications:

  • Nominal power: 350 W
  • Orbital diameter: 5 mm
  • No-load speed: 4,000 - 10,000 /min
  • Backing pad diameter: 150 mm
  • Weight without cable (Kg): 1.0

...

SXE 150-5.0 BL Orbital Sander 350W

Specifications:

  • Nominal power: 350 W
  • Orbital diameter: 5 mm
  • No-load speed: 4,000 - 10,000 /min
  • Backing pad diameter: 150 mm
  • Weight without cable (Kg): 1.0

Includes:

  • "Multi-hole" sanding plate with hook and loop
  • Hex key

Description:

Extremely lightweight and flat orbital sander with symmetrical design for easy hand...

See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Soft Start

    Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    5

    Fast material removal, more aggressive sanding.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Brushless

    Motor without brushes, offering greater autonomy and longer lifespan.
  • Weight (Net) 1000 gr
  • See all
728 00 €
Delivery by Fri, 26 Jun
14,00 €   shipping cost
Sent from Greece
From Tool-shop
Greece
10 pieces
See Power Tools on the page of Tool-shop
Review the product
Product report

Description

Description

SXE 150-5.0 BL Orbital Sander 350W

Specifications:

  • Nominal power: 350 W
  • Orbital diameter: 5 mm
  • No-load speed: 4,000 - 10,000 /min
  • Backing pad diameter: 150 mm
  • Weight without cable (Kg): 1.0

Includes:

  • "Multi-hole" sanding plate with hook and loop
  • Hex key

Description:

Extremely lightweight and flat orbital sander with symmetrical design for easy hand switching or two-handed operation. 5 mm orbit diameter for higher surface quality with good material removal. Non-slip switch with automatic disengagement function for safe start and speed control. Vario-Tacho-Constamatic (VTC) full-wave electronic system for sanding with materials that require customized speeds, which remain constant under load. Electronic preselection of the desired speed. Smooth start prevents material scratching when applying the tool in operation. Metabo brushless motor with the highest performance in continuous operation. Low vibrations for easy continuous operation. Overload protection: protects the motor from overheating. The separate central switch protects against unintentional start-up. The motor and plate brake allows for quick machine placement. External extraction capability. Can be connected to a vacuum cleaner. Multi-hole sanding plate for efficient operation and longer service life. User-friendly with replaceable cable.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
615050000

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
350 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Eccentricity
5 mm

Eccentricity: 5

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Fast material removal, more aggressive sanding.
Vibration (m/s²)
3.4
Net Weight
1000 gr
Cable Length
4.3 m
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
10000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
82 dB
Brushless
Yes

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
Yes

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Diameter
150 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

SXE 150-5.0 BL Orbital Sander 350W

Specifications:

  • Nominal power: 350 W
  • Orbital diameter: 5 mm
  • No-load speed: 4,000 - 10,000 /min
  • Backing pad diameter: 150 mm
  • Weight without cable (Kg): 1.0

Includes:

  • "Multi-hole" sanding plate with hook and loop
  • Hex key

Description:

Extremely lightweight and flat orbital sander with symmetrical design for easy hand switching or two-handed operation. 5 mm orbit diameter for higher surface quality with good material removal. Non-slip switch with automatic disengagement function for safe start and speed control. Vario-Tacho-Constamatic (VTC) full-wave electronic system for sanding with materials that require customized speeds, which remain constant under load. Electronic preselection of the desired speed. Smooth start prevents material scratching when applying the tool in operation. Metabo brushless motor with the highest performance in continuous operation. Low vibrations for easy continuous operation. Overload protection: protects the motor from overheating. The separate central switch protects against unintentional start-up. The motor and plate brake allows for quick machine placement. External extraction capability. Can be connected to a vacuum cleaner. Multi-hole sanding plate for efficient operation and longer service life. User-friendly with replaceable cable.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
615050000

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
350 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Eccentricity
5 mm

Eccentricity: 5

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Fast material removal, more aggressive sanding.
Vibration (m/s²)
3.4
Net Weight
1000 gr
Cable Length
4.3 m
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
10000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
82 dB
Brushless
Yes

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
Yes

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Diameter
150 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

728,00 €
14,00 €   shipping cost