Skroutz.mt

Master HP 80 Gasoline Surface Water Pump Centrifugal with Automatic Suction 4.8hp and Engine Honda GP 160
Surface Water Pumps

Master HP 80 Gasoline Surface Water Pump Centrifugal with Automatic Suction 4.8hp and Engine Honda GP 160 Code: 0103H002

The Master HP 80 centrifugal surface pump is powered by a Honda GP 160 petrol engine and features self-priming. It is suitable for clean water and has an aluminium pump body, a cast-iron impeller, and...

The Master HP 80 centrifugal surface pump is powered by a Honda GP 160 petrol engine and features self-priming. It is suitable for clean water and has an aluminium pump body, a cast-iron impeller, and Carbon Ceramic sealing components.

Power is transmitted via direct coupling. The air-cooled, single-cylinder engine starts with a recoil starter, while the...

See full description See full description

Top specs

  • Power Supply

    Gasoline

    Ideal for areas without access to electricity 2. Unaffected by power outages or voltage fluctuations.

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.

  • Centrifugal

    Pumps with impellers that enhance water flow.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
390 00 €
Delivery by Thu, 19 Nov
74,00 €   shipping cost
Sent from Greece
From Polymeros 4.8 (19)
4.8 (19 reviews)
Greece
1 piece
See Water Pumps on the page of Polymeros

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Master HP 80 centrifugal surface pump is powered by a Honda GP 160 petrol engine and features self-priming. It is suitable for clean water and has an aluminium pump body, a cast-iron impeller, and Carbon Ceramic sealing components.

Power is transmitted via direct coupling. The air-cooled, single-cylinder engine starts with a recoil starter, while the unit is mounted on a Greek-made metal base with an electrostatic coating.

  • Fuel: Unleaded petrol
  • Power: 4.8 hp
  • Engine displacement: 163 cc
  • Engine model: Honda GP 160
  • Pump type: Centrifugal
  • Self-priming: Yes
  • Water type: Clean water
  • Pump body material: Aluminium
  • Sealing component material: Carbon Ceramic
  • Impeller material: Cast iron
  • Inlet diameter: 3" (80 mm)
  • Maximum head: 24 m
  • Maximum flow rate: 1000 L/min (60 m³/h)
  • Drive: Direct coupling
  • Engine cooling: Air-cooled
  • Number of cylinders: 1
  • Starting system: Recoil starter
  • Fuel tank capacity: 3.1 L
  • Installation: Horizontal

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
0103H002

Main Specifications

Power Source
Gasoline

Power Source

Gasoline
Ideal for areas without access to electricity 2. Unaffected by power outages or voltage fluctuations.
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Engine Type
-
Horsepower
4.8 hp
Manometric Head
24 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Master HP 80 centrifugal surface pump is powered by a Honda GP 160 petrol engine and features self-priming. It is suitable for clean water and has an aluminium pump body, a cast-iron impeller, and Carbon Ceramic sealing components.

Power is transmitted via direct coupling. The air-cooled, single-cylinder engine starts with a recoil starter, while the unit is mounted on a Greek-made metal base with an electrostatic coating.

  • Fuel: Unleaded petrol
  • Power: 4.8 hp
  • Engine displacement: 163 cc
  • Engine model: Honda GP 160
  • Pump type: Centrifugal
  • Self-priming: Yes
  • Water type: Clean water
  • Pump body material: Aluminium
  • Sealing component material: Carbon Ceramic
  • Impeller material: Cast iron
  • Inlet diameter: 3" (80 mm)
  • Maximum head: 24 m
  • Maximum flow rate: 1000 L/min (60 m³/h)
  • Drive: Direct coupling
  • Engine cooling: Air-cooled
  • Number of cylinders: 1
  • Starting system: Recoil starter
  • Fuel tank capacity: 3.1 L
  • Installation: Horizontal

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
0103H002

Main Specifications

Power Source
Gasoline

Power Source

Gasoline
Ideal for areas without access to electricity 2. Unaffected by power outages or voltage fluctuations.
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Engine Type
-
Horsepower
4.8 hp
Manometric Head
24 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

390,00 €
74,00 €   shipping cost