If your headlight has scratches like mine and is not just foggy, pay more attention to the process with the three sandpapers, to remove the scratches first because the polish of the second stage with the sponge only shines and cannot fix the surface if it is not made flat with the sandpapers. It is better to pass the stage with the sandpapers by hand, either in circular motions or back and forth if necessary in the corners and edges, the result is equally good. If you pass it with a polisher and stop when it brings turns, the headlight melts and then you need a spatula to remove the melted pieces above the headlight. Do not be afraid to press the sandpaper with your hand. The more pressure and patience, the better the result in polishing with the polish. In the second stage with the polish, the best result is achieved either with a polisher or with a drill with a chuck at low speeds (personally, I rubbed until the polish from the bag was finished), otherwise it takes more patience and circular motions by hand. Before you proceed to the third stage, wash the headlight with plain water and a sponge, wipe it with leather or microfiber and let it dry well. In the third stage of applying the "varnish" with the small white sponge, repeat with circular motions until it spreads (it does not spread directly, it takes a little patience). Then leave it in the sun for 10-20 minutes to dry and do not pour water on the headlight for 1-2 days if possible. If you have done everything I mentioned and the headlight is still slightly foggy after polishing with the polish, then the problem is inside your headlight (the most common thing is to get moisture and dust inside). Now, for 9 euros plus shipping, for me personally, and if it lasts for a year, it is an excellent kit.