Skroutz.mt

Leo Group APm150 Electric Surface Water Pump 2hp Single-Phase
Surface Water Pumps

Leo Group APm150 Electric Surface Water Pump 2hp Single-Phase Code: 01064

The Leo Group APm150 electric surface pump is a peripheral pump with a brass impeller. It operates on a single-phase 220 V power supply and delivers up to 2 hp.

Its flow rate ranges from 0 to 3.6...

The Leo Group APm150 electric surface pump is a peripheral pump with a brass impeller. It operates on a single-phase 220 V power supply and delivers up to 2 hp.

Its flow rate ranges from 0 to 3.6 m³/h, with a corresponding head range of 90 to 18 m. The inlet and outlet ports are each 1 inch in diameter.

  • Pump type: Peripheral
  • Impeller: Brass
  • Power source:...
See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
  • Voltage Single-Phase

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
180 90 €
Lowest price '26
Delivery by Fri, 06 Nov
44,00 €   shipping cost
Sent from Greece
From MdTools 5.0 (46)
5.0 (46 reviews)
Greece
1 piece
See Water Pumps on the page of MdTools

Learn more about invoicing
Review the product
Product report

Description

Description

The Leo Group APm150 electric surface pump is a peripheral pump with a brass impeller. It operates on a single-phase 220 V power supply and delivers up to 2 hp.

Its flow rate ranges from 0 to 3.6 m³/h, with a corresponding head range of 90 to 18 m. The inlet and outlet ports are each 1 inch in diameter.

  • Pump type: Peripheral
  • Impeller: Brass
  • Power source: Electric
  • Horsepower: 2 hp
  • Voltage: Single-phase, 220 V
  • Installation: Horizontal
  • Head: 90 m
  • Ports: 1 inch × 1 inch

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
01064

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
2 hp
Manometric Head
90 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Leo Group APm150 electric surface pump is a peripheral pump with a brass impeller. It operates on a single-phase 220 V power supply and delivers up to 2 hp.

Its flow rate ranges from 0 to 3.6 m³/h, with a corresponding head range of 90 to 18 m. The inlet and outlet ports are each 1 inch in diameter.

  • Pump type: Peripheral
  • Impeller: Brass
  • Power source: Electric
  • Horsepower: 2 hp
  • Voltage: Single-phase, 220 V
  • Installation: Horizontal
  • Head: 90 m
  • Ports: 1 inch × 1 inch

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
01064

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
2 hp
Manometric Head
90 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

180,90 €
44,00 €   shipping cost