Skroutz.mt

Pedrollo PQ60 Electric Surface Water Pump 0.5hp Three-Phase
Surface Water Pumps

Pedrollo PQ60 Electric Surface Water Pump 0.5hp Three-Phase Code: 41PNQ60A

Suitable for use in clean water, free from chemicals and corrosive elements that may affect the materials used in the pump's construction. The pump's features, combined with its compact design, make...

Suitable for use in clean water, free from chemicals and corrosive elements that may affect the materials used in the pump's construction. The pump's features, combined with its compact design, make it suitable for both residential and industrial applications. Installation should take place in well-ventilated areas, protected from extreme weather conditions....

See full description See full description

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
  • Voltage Three-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
Review the product
Product report

Description

Description

Suitable for use in clean water, free from chemicals and corrosive elements that may affect the materials used in the pump's construction. The pump's features, combined with its compact design, make it suitable for both residential and industrial applications. Installation should take place in well-ventilated areas, protected from extreme weather conditions.

  • Type: PQ 60
  • Pump Type: Peripheral
  • Power Supply: Electric Current
  • Motor Power: 0.5 Hp
  • Capacity: 0.50 Hp - 370 Watt
  • Voltage: 380 Volt/50 Hz
  • Intake Port: 1"-25mm
  • Discharge Port: 1"-25mm
  • Max Head: 40 m
  • Max Flow Rate: 2.4 m3/h
  • Body Material: Cast Iron
  • Impeller Material: Bronze
  • Fluid Temperature: 90 °C
  • Ambient Temperature: 40 °C
  • Automatic Priming: No
  • Priming Height: 8 m
  • Net Weight: 4.8 Kg
  • Product Length: 19.20 cm
  • Product Width: 11.80 cm
  • Product Height: 14.50 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
41PNQ60A

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Three-Phase
Set
No

Technical Specifications

Horsepower
0.5 hp
Power
370 W
Flow Rate
2.4 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
40 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Suitable for use in clean water, free from chemicals and corrosive elements that may affect the materials used in the pump's construction. The pump's features, combined with its compact design, make it suitable for both residential and industrial applications. Installation should take place in well-ventilated areas, protected from extreme weather conditions.

  • Type: PQ 60
  • Pump Type: Peripheral
  • Power Supply: Electric Current
  • Motor Power: 0.5 Hp
  • Capacity: 0.50 Hp - 370 Watt
  • Voltage: 380 Volt/50 Hz
  • Intake Port: 1"-25mm
  • Discharge Port: 1"-25mm
  • Max Head: 40 m
  • Max Flow Rate: 2.4 m3/h
  • Body Material: Cast Iron
  • Impeller Material: Bronze
  • Fluid Temperature: 90 °C
  • Ambient Temperature: 40 °C
  • Automatic Priming: No
  • Priming Height: 8 m
  • Net Weight: 4.8 Kg
  • Product Length: 19.20 cm
  • Product Width: 11.80 cm
  • Product Height: 14.50 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
41PNQ60A

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Three-Phase
Set
No

Technical Specifications

Horsepower
0.5 hp
Power
370 W
Flow Rate
2.4 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
40 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

106,90 €
26,00 €   shipping cost