Skroutz.mt

Pedrollo PQm60 Electric Surface Water Pump Centrifugal 0.5hp Single-Phase
Surface Water Pumps

Pedrollo PQm60 Electric Surface Water Pump Centrifugal 0.5hp Single-Phase Code: 41PNQ60A1

The Pedrollo PQm60 surface centrifugal pump is designed to pump clean water and chemically non-aggressive liquids without abrasive particles. Its main construction features are a brass impeller and a...

The Pedrollo PQm60 surface centrifugal pump is designed to pump clean water and chemically non-aggressive liquids without abrasive particles. Its main construction features are a brass impeller and a cast-iron body. It has a maximum head of 40 m and a flow rate of up to 2.4 m³/h.

The base is made of aluminum, the shaft of stainless steel, and the seal of...

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Centrifugal

    Pumps with impellers that enhance water flow.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
85 40 €
Delivery by Fri, 06 Nov
14,00 €   shipping cost
Sent from Greece
From MdTools 5.0 (46)
5.0 (46 reviews)
Greece
1 piece
See Water Pumps on the page of MdTools

Learn more about invoicing
Review the product
Product report

Description

Description

The Pedrollo PQm60 surface centrifugal pump is designed to pump clean water and chemically non-aggressive liquids without abrasive particles. Its main construction features are a brass impeller and a cast-iron body. It has a maximum head of 40 m and a flow rate of up to 2.4 m³/h.

The base is made of aluminum, the shaft of stainless steel, and the seal of ceramic and graphite. It is intended for installation indoors or in a sheltered area.

  • Pump type: Surface centrifugal
  • Power supply: Electric
  • Horsepower: 0.5 hp
  • Power: 370 W
  • Voltage: Single-phase, 220 V
  • Installation: Horizontal
  • Body material: Cast iron
  • Impeller material: Brass
  • Base material: Aluminum
  • Shaft material: Stainless steel
  • Seal material: Ceramic and graphite
  • Suction lift: Up to 8 m
  • Flow rate: Up to 2.4 m³/h
  • Head: Up to 40 m
  • Liquid temperature: From -10 °C to 90 °C
  • Ports: 1" x 1"
  • Use: Clean water and chemically non-aggressive liquids without abrasive particles
  • Installation: Indoors or in a sheltered area

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
41PNQ60A1

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
0.5 hp
Power
370 W
Flow Rate
2.4 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
40 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Pedrollo PQm60 surface centrifugal pump is designed to pump clean water and chemically non-aggressive liquids without abrasive particles. Its main construction features are a brass impeller and a cast-iron body. It has a maximum head of 40 m and a flow rate of up to 2.4 m³/h.

The base is made of aluminum, the shaft of stainless steel, and the seal of ceramic and graphite. It is intended for installation indoors or in a sheltered area.

  • Pump type: Surface centrifugal
  • Power supply: Electric
  • Horsepower: 0.5 hp
  • Power: 370 W
  • Voltage: Single-phase, 220 V
  • Installation: Horizontal
  • Body material: Cast iron
  • Impeller material: Brass
  • Base material: Aluminum
  • Shaft material: Stainless steel
  • Seal material: Ceramic and graphite
  • Suction lift: Up to 8 m
  • Flow rate: Up to 2.4 m³/h
  • Head: Up to 40 m
  • Liquid temperature: From -10 °C to 90 °C
  • Ports: 1" x 1"
  • Use: Clean water and chemically non-aggressive liquids without abrasive particles
  • Installation: Indoors or in a sheltered area

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
41PNQ60A1

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
0.5 hp
Power
370 W
Flow Rate
2.4 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
40 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

85,40 €
14,00 €   shipping cost