Skroutz.mt

Pedrollo CP 158 Electric Surface Water Pump Centrifugal with Automatic Suction 1hp Three-Phase
Surface Water Pumps

Pedrollo CP 158 Electric Surface Water Pump Centrifugal with Automatic Suction 1hp Three-Phase Code: 44CIT16A

The Pedrollo CP 158 surface centrifugal pump is suitable for clean water and liquids that do not corrode its materials. It is designed to pump water even when air is present and can be used in...

The Pedrollo CP 158 surface centrifugal pump is suitable for clean water and liquids that do not corrode its materials. It is designed to pump water even when air is present and can be used in domestic applications, small-scale irrigation such as garden watering, and water distribution. It must be installed indoors or in a location protected from adverse...

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.

  • Centrifugal

    Pumps with impellers that enhance water flow.
  • Voltage Three-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
190 00 €
Delivery by Mon, 09 Nov
47,00 €   shipping cost
Sent from Greece
From Thermocity 4.8 (67)
4.8 (67 reviews)
Greece
20+ pieces
See Water Pumps on the page of Thermocity

Learn more about invoicing
Review the product
Product report

Description

Description

The Pedrollo CP 158 surface centrifugal pump is suitable for clean water and liquids that do not corrode its materials. It is designed to pump water even when air is present and can be used in domestic applications, small-scale irrigation such as garden watering, and water distribution. It must be installed indoors or in a location protected from adverse weather conditions.

  • Power supply: Electric
  • Type: Centrifugal, single-stage
  • Horsepower: 1 hp
  • Power: 730 W
  • Priming: Automatic
  • Installation: Horizontal
  • Voltage: Three-phase, 380 V / 50 Hz
  • Connections: 1'' + 1''
  • Maximum flow rate: 5.4 m³/h
  • Maximum head: 36 m
  • Suction lift: 7 m
  • Pumped liquid temperature: From -10 °C to 90 °C
  • Ambient temperature: Up to 40 °C
  • Protection rating: IP44
  • Insulation class: F
  • Pump body: Cast iron
  • Impeller: AISI 304 stainless steel
  • Mechanical seal: Ceramic-graphite, NBR

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
44CIT16A

Main Specifications

Type
Single Stage

Type

Single Stage
They have a wing, making maintenance quite easy. They are suitable for low pressure operations where a high flow rate is maintained (e.g. irrigation).
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Three-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Power
730 W
Flow Rate
5.4 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
36 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Pedrollo CP 158 surface centrifugal pump is suitable for clean water and liquids that do not corrode its materials. It is designed to pump water even when air is present and can be used in domestic applications, small-scale irrigation such as garden watering, and water distribution. It must be installed indoors or in a location protected from adverse weather conditions.

  • Power supply: Electric
  • Type: Centrifugal, single-stage
  • Horsepower: 1 hp
  • Power: 730 W
  • Priming: Automatic
  • Installation: Horizontal
  • Voltage: Three-phase, 380 V / 50 Hz
  • Connections: 1'' + 1''
  • Maximum flow rate: 5.4 m³/h
  • Maximum head: 36 m
  • Suction lift: 7 m
  • Pumped liquid temperature: From -10 °C to 90 °C
  • Ambient temperature: Up to 40 °C
  • Protection rating: IP44
  • Insulation class: F
  • Pump body: Cast iron
  • Impeller: AISI 304 stainless steel
  • Mechanical seal: Ceramic-graphite, NBR

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
44CIT16A

Main Specifications

Type
Single Stage

Type

Single Stage
They have a wing, making maintenance quite easy. They are suitable for low pressure operations where a high flow rate is maintained (e.g. irrigation).
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Three-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Power
730 W
Flow Rate
5.4 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
36 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

190,00 €
47,00 €   shipping cost