Skroutz.mt

Pedrollo PKm 60 Electric Surface Water Pump Centrifugal 0.5hp Single-Phase
Surface Water Pumps

Pedrollo PKm 60 Electric Surface Water Pump Centrifugal 0.5hp Single-Phase Code: 41PNK60A1

Suitable for use with clean water, without chemicals and corrosive elements that may affect the materials used in the pump. Due to its easy, economical, and reliable use, it is ideal for home use,...

Suitable for use with clean water, without chemicals and corrosive elements that may affect the materials used in the pump. Due to its easy, economical, and reliable use, it is ideal for home use, whether with small pressure tanks or for irrigation. Installation should be done in well-ventilated areas, protected from extreme weather conditions.

  • Type: PKm 60...
See full description See full description

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Centrifugal

    Pumps with impellers that enhance water flow.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
Product report

Description

Description

Suitable for use with clean water, without chemicals and corrosive elements that may affect the materials used in the pump. Due to its easy, economical, and reliable use, it is ideal for home use, whether with small pressure tanks or for irrigation. Installation should be done in well-ventilated areas, protected from extreme weather conditions.

  • Type: PKm 60
  • Pump Type: Peripheral
  • Power Supply: Electric Current
  • Motor Power (Hp): 0.5
  • Capacity: 0.50Hp - 370Watt
  • Voltage (Volt): 220 Volt/50 Hz
  • Intake Diameter Φ (Inch-mm): 1"-25mm
  • Outlet Diameter Φ (Inch-mm): 1"-25mm
  • Max Head (M): 40.00
  • Max Flow Rate (m3/h): 2.40
  • Body Material: Cast Iron
  • Impeller Material: Bronze
  • Fluid Temperature (°C): 60
  • Ambient Temperature (°C): 50
  • Self-Priming (M): No
  • Lift Height (M): 8
  • Net Weight (Kg): 5.20
  • Product Length (cm): 20.80
  • Product Width (cm): 11.80
  • Product Height (cm): 14.50
  • Packaging Type: Carton Box

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
41PNK60A1

Main Specifications

Type
Single Stage

Type

Single Stage
They have a wing, making maintenance quite easy. They are suitable for low pressure operations where a high flow rate is maintained (e.g. irrigation).
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
0.5 hp
Power
370 W
Flow Rate
5.4 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
38 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
3.8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

Suitable for use with clean water, without chemicals and corrosive elements that may affect the materials used in the pump. Due to its easy, economical, and reliable use, it is ideal for home use, whether with small pressure tanks or for irrigation. Installation should be done in well-ventilated areas, protected from extreme weather conditions.

  • Type: PKm 60
  • Pump Type: Peripheral
  • Power Supply: Electric Current
  • Motor Power (Hp): 0.5
  • Capacity: 0.50Hp - 370Watt
  • Voltage (Volt): 220 Volt/50 Hz
  • Intake Diameter Φ (Inch-mm): 1"-25mm
  • Outlet Diameter Φ (Inch-mm): 1"-25mm
  • Max Head (M): 40.00
  • Max Flow Rate (m3/h): 2.40
  • Body Material: Cast Iron
  • Impeller Material: Bronze
  • Fluid Temperature (°C): 60
  • Ambient Temperature (°C): 50
  • Self-Priming (M): No
  • Lift Height (M): 8
  • Net Weight (Kg): 5.20
  • Product Length (cm): 20.80
  • Product Width (cm): 11.80
  • Product Height (cm): 14.50
  • Packaging Type: Carton Box

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
41PNK60A1

Main Specifications

Type
Single Stage

Type

Single Stage
They have a wing, making maintenance quite easy. They are suitable for low pressure operations where a high flow rate is maintained (e.g. irrigation).
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
0.5 hp
Power
370 W
Flow Rate
5.4 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
38 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
3.8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
69,00 €
14,00 €   shipping cost