Skroutz.mt

Pedrollo 4CPm 100 Electric Surface Water Pump 1hp Single-Phase
Surface Water Pumps

Pedrollo 4CPm 100 Electric Surface Water Pump 1hp Single-Phase Code: 100129

Multi-Stage Pumps Stainless Steel Body

Suitable for use in clean water, free from chemicals and corrosive elements that may affect the construction materials of the pump. Due to its easy and reliable...

Multi-Stage Pumps Stainless Steel Body

Suitable for use in clean water, free from chemicals and corrosive elements that may affect the construction materials of the pump. Due to its easy and reliable use, it is ideal for household use, whether with small or medium pressure vessels, or for irrigation.

Installation should be done in well-ventilated areas,...

See full description See full description

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all

Horsepower

  1. 0.85 hp

    from 179,00 €

  2. 1 hp

    from 217,00 €

Manometric head

  1. 43 m

    from 217,00 €

  2. 52 m

    from 179,00 €

Review the product
Product report

Description

Description

Multi-Stage Pumps Stainless Steel Body

Suitable for use in clean water, free from chemicals and corrosive elements that may affect the construction materials of the pump. Due to its easy and reliable use, it is ideal for household use, whether with small or medium pressure vessels, or for irrigation.

Installation should be done in well-ventilated areas, protected from extreme weather conditions.

  • Type: 4CPm 100
  • Pump Type: Multi-Stage
  • Power Supply: Electric Current
  • Motor Power (Hp): 1.00
  • Power (hp-Watt): 1Hp-736Watt
  • Voltage (Volt): 220 Volt/50 Hz
  • Inlet Diameter Φ (Inch-mm): 1"-25mm
  • Outlet Diameter Φ (Inch-mm): 1"-25mm
  • Max Head (M): 50.00
  • Max Flow Rate (m3/h): 7.80
  • Body Material: Cast Iron
  • Impeller Material: Plastic (NORYL)
  • Fluid Temperature (°C): 40
  • Ambient Temperature (°C): 40
  • Automatic Suction (M): No
  • Suction Lift (M): 7
  • Additional Features: Low noise
  • Net Weight (Kg): 14.20
  • Product Length (cm): 38.20
  • Product Width (cm): 15.80
  • Product Height (cm): 19.20

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
100129

Main Specifications

Type
Multistage

Type

Multistage
Pumps with 3 or more blades exert high pressure and achieve maximum efficiency. Ideal for homes with low water pressure.
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Power
750 W
Flow Rate
7.2 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
43 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Multi-Stage Pumps Stainless Steel Body

Suitable for use in clean water, free from chemicals and corrosive elements that may affect the construction materials of the pump. Due to its easy and reliable use, it is ideal for household use, whether with small or medium pressure vessels, or for irrigation.

Installation should be done in well-ventilated areas, protected from extreme weather conditions.

  • Type: 4CPm 100
  • Pump Type: Multi-Stage
  • Power Supply: Electric Current
  • Motor Power (Hp): 1.00
  • Power (hp-Watt): 1Hp-736Watt
  • Voltage (Volt): 220 Volt/50 Hz
  • Inlet Diameter Φ (Inch-mm): 1"-25mm
  • Outlet Diameter Φ (Inch-mm): 1"-25mm
  • Max Head (M): 50.00
  • Max Flow Rate (m3/h): 7.80
  • Body Material: Cast Iron
  • Impeller Material: Plastic (NORYL)
  • Fluid Temperature (°C): 40
  • Ambient Temperature (°C): 40
  • Automatic Suction (M): No
  • Suction Lift (M): 7
  • Additional Features: Low noise
  • Net Weight (Kg): 14.20
  • Product Length (cm): 38.20
  • Product Width (cm): 15.80
  • Product Height (cm): 19.20

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
100129

Main Specifications

Type
Multistage

Type

Multistage
Pumps with 3 or more blades exert high pressure and achieve maximum efficiency. Ideal for homes with low water pressure.
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Power
750 W
Flow Rate
7.2 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
43 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

217,00 €
53,00 €   shipping cost