This is the "2 in 1" option of instant water heater/tap, which can easily, quickly, and most importantly, economically meet the needs of hot water supply, as it falls into the energy class A category.
The Cronus O' Ring Instant Water Heater/Tap, with a power of 3.3 kW, is made of stainless steel 304 and has a modern design. It offers the smartest solution for combining a water heater and a tap, providing instant hot water for small demands.
In just 7 seconds, we have hot water for use in a sink or kitchen.
Device 2 in 1
This is the "2 in 1" option of instant water heater/tap, which can easily, quickly, and most importantly, economically meet the needs of hot water supply, as it falls into the energy class A category.
Easy and fast installation
Through its easy and fast installation on the countertop, it is possible to use it immediately and safely as it has a thermal safety for protection against overheating, a pressure switch for activation only when there is water flow, and an additional leakage relay.
Easy to use
Another key advantage is the excellent ease of use of the models it offers. It features an LED temperature display and a rotating handle for transitioning from cold to hot and vice versa. The water flow output is controlled through its easily cleanable nozzle.
Compatible with:
- Instant hot water in 7" for use in sink or kitchen.
- The following models have an LED temperature display (Note: the temperature display refers to the internal container).
- Power: 3300 W, 230 V ~ 50 Hz, with IPX4 protection class and energy class A.
- The devices are free-flowing (nominal pressure 0 bar) and are screwed onto the sink.
- Performance examples:
- Input temperature 15 °C and output at 40 °C, performance 2 lt/min.
- Input temperature 25 °C and output at 40 °C, performance 3.3 lt/min.
- In cases of lower input temperatures in winter and higher in summer, performance varies accordingly.
Advantages of instant water heaters compared to traditional electric water heaters
- It is small in size and does not take up much space.
- There is no energy loss, as only the water that is being used is heated at that moment. Therefore, there is savings on the electricity bill. In a traditional water heater, the unused hot water goes to waste.
- The hot water used in the instant water heater is used as is, without mixing with cold water, as in a traditional water heater. This also saves water, in addition to electricity.
- There is no need to wait for the water to heat up. As soon as we turn on the faucet, hot water starts running in a few seconds. A traditional water heater takes some minutes, depending on its size.
- The hot water never runs out. As long as we have the faucet open, we will have hot water.
Product Details
- Power Source
- Electric Single Phase
- Maximum Power
- 3.3 kW
- Maximum Flow Rate
- 3.7 lt/min
- Maximum Temperature
- 50 °C
- Temperature Setting
- Degrees °C
- Placement
- Kitchen
- Wall Mounted
- No
- Inverter
- No
- Remote Control
- No
Dimensions
- Height
- 38 cm
- Width
- -
- Length
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.