Skroutz.mt

Wilo TMW 32/11 Single-phase Water Pump 0.75hp 4048414
Submersible Water Pumps

Wilo TMW 32/11 Single-phase Water Pump 0.75hp 4048414

Key features:

  • Maximum pump submersion: 3m
  • Maximum temperature: 40 °C
  • Outlet: 1 ¼
  • Performance: 16000
  • Cable length: 4m
  • Power: 550W
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
  • See all

User Manual

The product is not available for shipping to the selected country.
Product report

Description

Description

Submersible sewage pump from the manufacturer Wilo, used for pumping dirty water that may contain particles.

• It has a horsepower of 0.75hp and a power of 550W.

Features

  • User-friendly and ergonomic carrying handle, lightweight, ready with plug version (Plug&Pump)
  • Safe operation with hermetically sealed motor with stainless steel casing, cooling jacket, mechanical seal, and sealing chamber
  • Drain TMR with minimum discharge level – minimal water residue of 2 mm

Series Description

Design

Submersible pump for fixed and portable liquid installation within a well. Pump with built-in float switch for fully automated operation.

Liquids

For pumping in residential areas:

  • Sewage without waste
  • Dirty water (with small amounts of sand and gravel)

Equipment/Operation

  • Automatic thermal motor monitoring
  • Built-in capacitor
  • Built-in float switch

Specifications

  • Electrical connection: 1~230 V, 50 Hz
  • Operating mode "submerged": S1
  • Operating mode "emerging": S3 25%
  • Protection rating: IP68
  • Insulation class: F
  • Liquid temperature: 3 ... 40 °C (37 ... 104 °F)

Materials

  • Hydraulic system casing: PP-GF30
  • Impeller: PPE/PS-GF20
  • Suction head: Connecting material
  • Motor housing: 1.4301 (AISI 304) (HD variant: AISI 316L)
  • Sealing:
    • On the pump: C/SiC (BQ1PFF)
    • On the motor side: NBR
    • Static: NBR
  • Shaft: 1.4104 (AISI 430F) (HD variant: AISI 316L)

Design

Drain TMW

Sewage pump with integrated vortex system (Twister function), open multi-channel impeller, and vertical threaded connection. Pump casing, suction head, and impeller made of composite material. 1~ motor (cooling jacket) with built-in operating capacitor and automatic thermal motor monitoring. Motor housing made of stainless steel. Oil-filled sealing chamber with double sealing: on the motor side, a shaft sealing ring is installed, and on the pump side, a mechanical seal is installed. Connection cable with float switch and installed plug (CEE 7/7).

The Twister function ensures constant vortexing in the suction area of the pump. The vortices prevent sediment from settling and sinking. In this way, the pump sump remains clean and odor formation is prevented.

The package includes

  • Pump
  • Check valve, pre-assembled
  • Installation and operating instructions

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage, Rainwater

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.75 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
562.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
4 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Particle Size
10 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • grgmkrs
    5
    grgmkrs
    This review is about power: 375 W, outlet nozzle: -

    Almost 15 years of operation, used for emptying a stormwater shaft in an underground garage, the small 0.375KW model, at a manometric head of 2.5m !!!! This year I decided to clean it. German technology made in Italy. Incredible sound, reminds me of something from DUCATI. Five stars because I can't rate it with twenty.

    Translated from Greek ·
    Did you find this review helpful?
  • grgmkrs
    5
    grgmkrs

    Almost 15 years of operation, used for emptying a stormwater shaft in an underground garage, the small 0.375KW model, at a manometric head of 2.5m !!!! This year I decided to clean it. German technology made in Italy. Incredible sound, reminds me of something from DUCATI. Five stars because I can't rate it with twenty.

    Translated from Greek ·
    0
  • See all

Description & Specifications

Submersible sewage pump from the manufacturer Wilo, used for pumping dirty water that may contain particles.

• It has a horsepower of 0.75hp and a power of 550W.

Features

  • User-friendly and ergonomic carrying handle, lightweight, ready with plug version (Plug&Pump)
  • Safe operation with hermetically sealed motor with stainless steel casing, cooling jacket, mechanical seal, and sealing chamber
  • Drain TMR with minimum discharge level – minimal water residue of 2 mm

Series Description

Design

Submersible pump for fixed and portable liquid installation within a well. Pump with built-in float switch for fully automated operation.

Liquids

For pumping in residential areas:

  • Sewage without waste
  • Dirty water (with small amounts of sand and gravel)

Equipment/Operation

  • Automatic thermal motor monitoring
  • Built-in capacitor
  • Built-in float switch

Specifications

  • Electrical connection: 1~230 V, 50 Hz
  • Operating mode "submerged": S1
  • Operating mode "emerging": S3 25%
  • Protection rating: IP68
  • Insulation class: F
  • Liquid temperature: 3 ... 40 °C (37 ... 104 °F)

Materials

  • Hydraulic system casing: PP-GF30
  • Impeller: PPE/PS-GF20
  • Suction head: Connecting material
  • Motor housing: 1.4301 (AISI 304) (HD variant: AISI 316L)
  • Sealing:
    • On the pump: C/SiC (BQ1PFF)
    • On the motor side: NBR
    • Static: NBR
  • Shaft: 1.4104 (AISI 430F) (HD variant: AISI 316L)

Design

Drain TMW

Sewage pump with integrated vortex system (Twister function), open multi-channel impeller, and vertical threaded connection. Pump casing, suction head, and impeller made of composite material. 1~ motor (cooling jacket) with built-in operating capacitor and automatic thermal motor monitoring. Motor housing made of stainless steel. Oil-filled sealing chamber with double sealing: on the motor side, a shaft sealing ring is installed, and on the pump side, a mechanical seal is installed. Connection cable with float switch and installed plug (CEE 7/7).

The Twister function ensures constant vortexing in the suction area of the pump. The vortices prevent sediment from settling and sinking. In this way, the pump sump remains clean and odor formation is prevented.

The package includes

  • Pump
  • Check valve, pre-assembled
  • Installation and operating instructions

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage, Rainwater

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.75 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
562.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
4 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Particle Size
10 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • grgmkrs
    5
    grgmkrs
    This review is about power: 375 W, outlet nozzle: -

    Almost 15 years of operation, used for emptying a stormwater shaft in an underground garage, the small 0.375KW model, at a manometric head of 2.5m !!!! This year I decided to clean it. German technology made in Italy. Incredible sound, reminds me of something from DUCATI. Five stars because I can't rate it with twenty.

    Translated from Greek ·
    Did you find this review helpful?
  • grgmkrs
    5
    grgmkrs

    Almost 15 years of operation, used for emptying a stormwater shaft in an underground garage, the small 0.375KW model, at a manometric head of 2.5m !!!! This year I decided to clean it. German technology made in Italy. Incredible sound, reminds me of something from DUCATI. Five stars because I can't rate it with twenty.

    Translated from Greek ·
    0
  • See all