3D Printer Filament

Esun PETG 1.75mm White 1kg 1τμχ (Spool) 3D Printer Filament

The 1.75 mm eSun PETG filament is designed for 3D printing and combines water and chemical resistance with high durability. Its diameter has a tight tolerance for consistent feeding, while the...

The 1.75 mm eSun PETG filament is designed for 3D printing and combines water and chemical resistance with high durability. Its diameter has a tight tolerance for consistent feeding, while the filament offers low warping, good layer adhesion, and minimal stringing. Smooth winding helps ensure tangle-free feeding and prevents clogs in the nozzle and extruder....

See full description See full description

Top specs

  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
16 80 €

-5% for 3+ items

Delivery by Wed, 25 Nov
14,00 €   shipping cost
Sent from Greece
From Grobotronics 4.9 (47)
Greece
13 pieces
See Printer Supplies on the page of Grobotronics

Learn more about invoicing

Description

Description

The 1.75 mm eSun PETG filament is designed for 3D printing and combines water and chemical resistance with high durability. Its diameter has a tight tolerance for consistent feeding, while the filament offers low warping, good layer adhesion, and minimal stringing. Smooth winding helps ensure tangle-free feeding and prevents clogs in the nozzle and extruder.

The filament is vacuum-sealed with a desiccant packet to protect it from dust and dirt before the package is opened. It is suitable for making toys, stationery, electronic accessories, and cosmetic containers.

  • Material: PETG
  • Color: White
  • Diameter: 1.75 mm
  • Weight: 1 kg
  • Filament length: 327 m
  • Packaging: Spool
  • Quantity: 1 piece
  • Printing temperature: 230–250 °C
  • Heated bed temperature: 75–90 °C
  • Printing speed: 40–100 mm/s
  • Maximum fan speed: 100%
  • Specific gravity: 1.27 g/cm³
  • Elongation at break: 83%
  • Flexural strength: 58.1%
  • Flexural modulus: 1073
  • Impact strength: 4.7 kJ/m²

Manufacturer

See full description

Specifications

Specifications

Material
PETG
Colour
White
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (16)

Reviews

  1. 10
  2. 2
  3. 2
  4. 1
  5. 1
Review this product

What do users say? AI-generated summary

Overall, users report that the filament can produce very good prints and appreciate its consistency when properly calibrated. With initial calibration and a suitable profile, it performs well. However, several users note that it absorbs moisture quickly, and stringing or warping can occur in some cases.

Reviews by our members

  • This review is about the colour: Grey

    I have tried PETG filaments from various companies and generally I haven't had problems except for this one. It has warping that I haven't seen with any other PETG filament. I am attaching a photo for comparison, the same object with another filament. Nozzle 0.6mm@240°C, layer 0.3mm, bed @80°C with hair spray

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Black

    I have been using it for years and it was okay. Now, however, the latest batches have a paper roll instead of plastic, for some reason they are so wet from the factory, where almost half of the roll is useless and the rest prints better, but still has a lot of stringing. These issues didn't exist in the past.

    Translated from Greek ·
    Did you find this review helpful?
  • _ark76_
    4
    2 out of 2 members found this review helpful

    Verified purchase

    This review is about the colour: Black

    Overall, I am very satisfied with eSun filaments, including this one. They consistently exhibit the same quality and characteristics in every batch. Once you find the appropriate temperature settings, cooling, etc., everything is consistent. After my own observation, eSun PETG should not exceed 235°C as it becomes brittle afterwards. Additionally, I print with a brim and a bed temperature of 80°C.

    Translated from Greek ·
    Did you find this review helpful?
  • Keno
    3
    4 out of 5 members found this review helpful
    This review is about the colour: Black

    If you find the right setting, it produces pretty good results, but it gives me the impression that it absorbs moisture faster than other brands, so if you get it and don't work with it quickly, you may have issues with the prints

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    With a little calibration at the beginning, it prints flawlessly.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the colour: Black

    Very good price and with a little calibration on the first prints and the right profiles it prints flawlessly.

    Translated from Greek ·
    Did you find this review helpful?
  • 3
    1 out of 4 members found this review helpful

    Verified purchase

    This review is about the colour: Grey

    It absorbs water quickly

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

  • Verified purchase

    This review is about the colour: Black

  • Verified purchase

  • Verified purchase

    This review is about the colour: Black

  • This review is about the colour: Grey

  • Verified purchase

    This review is about the colour: Black

  • This review is about the colour: Black

  • I have tried PETG filaments from various companies and generally I haven't had problems except for this one. It has warping that I haven't seen with any other PETG filament. I am attaching a photo for comparison, the same object with another filament. Nozzle 0.6mm@240°C, layer 0.3mm, bed @80°C with hair spray

    Translated from Greek ·
    0
  • I have been using it for years and it was okay. Now, however, the latest batches have a paper roll instead of plastic, for some reason they are so wet from the factory, where almost half of the roll is useless and the rest prints better, but still has a lot of stringing. These issues didn't exist in the past.

    Translated from Greek ·
    0
  • Overall, I am very satisfied with eSun filaments, including this one. They consistently exhibit the same quality and characteristics in every batch. Once you find the appropriate temperature settings, cooling, etc., everything is consistent. After my own observation, eSun PETG should not exceed 235°C as it becomes brittle afterwards. Additionally, I print with a brim and a bed temperature of 80°C.

    Translated from Greek ·
    2
  • If you find the right setting, it produces pretty good results, but it gives me the impression that it absorbs moisture faster than other brands, so if you get it and don't work with it quickly, you may have issues with the prints

    Translated from Greek ·
    4
  • With a little calibration at the beginning, it prints flawlessly.

    Translated from Greek ·
    0
  • See all

Description & Specifications

The 1.75 mm eSun PETG filament is designed for 3D printing and combines water and chemical resistance with high durability. Its diameter has a tight tolerance for consistent feeding, while the filament offers low warping, good layer adhesion, and minimal stringing. Smooth winding helps ensure tangle-free feeding and prevents clogs in the nozzle and extruder.

The filament is vacuum-sealed with a desiccant packet to protect it from dust and dirt before the package is opened. It is suitable for making toys, stationery, electronic accessories, and cosmetic containers.

  • Material: PETG
  • Color: White
  • Diameter: 1.75 mm
  • Weight: 1 kg
  • Filament length: 327 m
  • Packaging: Spool
  • Quantity: 1 piece
  • Printing temperature: 230–250 °C
  • Heated bed temperature: 75–90 °C
  • Printing speed: 40–100 mm/s
  • Maximum fan speed: 100%
  • Specific gravity: 1.27 g/cm³
  • Elongation at break: 83%
  • Flexural strength: 58.1%
  • Flexural modulus: 1073
  • Impact strength: 4.7 kJ/m²

Manufacturer

Material
PETG
Colour
White
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (16)

  1. 10
  2. 2
  3. 2
  4. 1
  5. 1
Review this product

What do users say? AI-generated summary

Overall, users report that the filament can produce very good prints and appreciate its consistency when properly calibrated. With initial calibration and a suitable profile, it performs well. However, several users note that it absorbs moisture quickly, and stringing or warping can occur in some cases.

Reviews by our members

  • This review is about the colour: Grey

    I have tried PETG filaments from various companies and generally I haven't had problems except for this one. It has warping that I haven't seen with any other PETG filament. I am attaching a photo for comparison, the same object with another filament. Nozzle 0.6mm@240°C, layer 0.3mm, bed @80°C with hair spray

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Black

    I have been using it for years and it was okay. Now, however, the latest batches have a paper roll instead of plastic, for some reason they are so wet from the factory, where almost half of the roll is useless and the rest prints better, but still has a lot of stringing. These issues didn't exist in the past.

    Translated from Greek ·
    Did you find this review helpful?
  • _ark76_
    4
    2 out of 2 members found this review helpful

    Verified purchase

    This review is about the colour: Black

    Overall, I am very satisfied with eSun filaments, including this one. They consistently exhibit the same quality and characteristics in every batch. Once you find the appropriate temperature settings, cooling, etc., everything is consistent. After my own observation, eSun PETG should not exceed 235°C as it becomes brittle afterwards. Additionally, I print with a brim and a bed temperature of 80°C.

    Translated from Greek ·
    Did you find this review helpful?
  • Keno
    3
    4 out of 5 members found this review helpful
    This review is about the colour: Black

    If you find the right setting, it produces pretty good results, but it gives me the impression that it absorbs moisture faster than other brands, so if you get it and don't work with it quickly, you may have issues with the prints

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    With a little calibration at the beginning, it prints flawlessly.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the colour: Black

    Very good price and with a little calibration on the first prints and the right profiles it prints flawlessly.

    Translated from Greek ·
    Did you find this review helpful?
  • 3
    1 out of 4 members found this review helpful

    Verified purchase

    This review is about the colour: Grey

    It absorbs water quickly

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

  • Verified purchase

    This review is about the colour: Black

  • Verified purchase

  • Verified purchase

    This review is about the colour: Black

  • This review is about the colour: Grey

  • Verified purchase

    This review is about the colour: Black

  • This review is about the colour: Black

  • I have tried PETG filaments from various companies and generally I haven't had problems except for this one. It has warping that I haven't seen with any other PETG filament. I am attaching a photo for comparison, the same object with another filament. Nozzle 0.6mm@240°C, layer 0.3mm, bed @80°C with hair spray

    Translated from Greek ·
    0
  • I have been using it for years and it was okay. Now, however, the latest batches have a paper roll instead of plastic, for some reason they are so wet from the factory, where almost half of the roll is useless and the rest prints better, but still has a lot of stringing. These issues didn't exist in the past.

    Translated from Greek ·
    0
  • Overall, I am very satisfied with eSun filaments, including this one. They consistently exhibit the same quality and characteristics in every batch. Once you find the appropriate temperature settings, cooling, etc., everything is consistent. After my own observation, eSun PETG should not exceed 235°C as it becomes brittle afterwards. Additionally, I print with a brim and a bed temperature of 80°C.

    Translated from Greek ·
    2
  • If you find the right setting, it produces pretty good results, but it gives me the impression that it absorbs moisture faster than other brands, so if you get it and don't work with it quickly, you may have issues with the prints

    Translated from Greek ·
    4
  • With a little calibration at the beginning, it prints flawlessly.

    Translated from Greek ·
    0
  • See all
16,80 €
14,00 €   shipping cost