Skroutz.mt

Telwin Superior 250 Welding Machine Inverter TIG / MMA with Maximum Welding Current 220A and Duty Cycle 25%
Welding Machines

Telwin Superior 250 Welding Machine Inverter TIG / MMA with Maximum Welding Current 220A and Duty Cycle 25%

SUPERIOR 250 INVERTER Electrode MMA-TIG

Features:

  • Three-phase Voltage: 400V
  • Network Frequency: 50/60Hz
  • Energy Description Range: 10-250A
  • Current Maximum: 220A-25%
  • 60% Current: 130A
  • Maximum Vacuum...

SUPERIOR 250 INVERTER Electrode MMA-TIG

Features:

  • Three-phase Voltage: 400V
  • Network Frequency: 50/60Hz
  • Energy Description Range: 10-250A
  • Current Maximum: 220A-25%
  • 60% Current: 130A
  • Maximum Vacuum Voltage: 85V
  • Maximum Safety Fuse: 12A
  • 60% Absorbed current - max: 6.8A
  • Maximum Output: 8.2kW
  • 60% Absorbed power: 4kW
  • Minimum Power Supply: 12KW
  • Network Safety: 10A...
See full description See full description

  • Welding Current

    220

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    400

    It is the supply voltage that the machine requires from the electrical grid.
  • See all

Welding current (max)

  1. 220 A

    from 895,00 €

  2. 250 A

    from 2.214,00 €

895 00 €
Delivery by Fri, 07 Aug
29,00 €   shipping cost
Sent from Greece
From Emkate 4.9 (17)
4.9 (17 reviews)
Greece
10 pieces
See Tools on the page of Emkate
Review the product
Product report

Description

Description

SUPERIOR 250 INVERTER Electrode MMA-TIG

Features:

  • Three-phase Voltage: 400V
  • Network Frequency: 50/60Hz
  • Energy Description Range: 10-250A
  • Current Maximum: 220A-25%
  • 60% Current: 130A
  • Maximum Vacuum Voltage: 85V
  • Maximum Safety Fuse: 12A
  • 60% Absorbed current - max: 6.8A
  • Maximum Output: 8.2kW
  • 60% Absorbed power: 4kW
  • Minimum Power Supply: 12KW
  • Network Safety: 10A
  • Efficiency: 87%
  • Power Factor (cosphi): 0.8
  • Electrodes used in DC: 1.6-5mm
  • Protection: IP23 CERTIFICATION
  • Dimensions (LxWxH): 41x17x34cm
  • Weight: 8.4kg

Description:

  • High stability of welding current even with voltage fluctuations.
  • Immediate welding control.
  • HOT START IGNITION: Additional electrical power for smooth welding start.
  • ANTI-STICK: Stops welding current if the electrode sticks to the material.
  • ARC-FORCE: Automatic current calibration during welding for perfect seam.
  • Compact and lightweight.
  • Thermostatic welding.
  • Overvoltage-undervoltage protection, overcurrent protection.
  • Generator protection (± 15%).
  • The Superior 250 is an electrode welding machine as well as a TIG welding machine with scratch start in direct current (DC).
  • Use it with a wide range of electrode materials such as rutile, cast iron, steel, stainless steel, titanium, copper, nickel, and their alloys.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
TIG, MMA

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
220 A

Welding Current (max): 220


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
25 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
400 V

Supply Voltage: 400


It is the supply voltage that the machine requires from the electrical grid.
Maximum Electrode Diameter
5 mm

Maximum Electrode Diameter: 5


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Weight
8400 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

SUPERIOR 250 INVERTER Electrode MMA-TIG

Features:

  • Three-phase Voltage: 400V
  • Network Frequency: 50/60Hz
  • Energy Description Range: 10-250A
  • Current Maximum: 220A-25%
  • 60% Current: 130A
  • Maximum Vacuum Voltage: 85V
  • Maximum Safety Fuse: 12A
  • 60% Absorbed current - max: 6.8A
  • Maximum Output: 8.2kW
  • 60% Absorbed power: 4kW
  • Minimum Power Supply: 12KW
  • Network Safety: 10A
  • Efficiency: 87%
  • Power Factor (cosphi): 0.8
  • Electrodes used in DC: 1.6-5mm
  • Protection: IP23 CERTIFICATION
  • Dimensions (LxWxH): 41x17x34cm
  • Weight: 8.4kg

Description:

  • High stability of welding current even with voltage fluctuations.
  • Immediate welding control.
  • HOT START IGNITION: Additional electrical power for smooth welding start.
  • ANTI-STICK: Stops welding current if the electrode sticks to the material.
  • ARC-FORCE: Automatic current calibration during welding for perfect seam.
  • Compact and lightweight.
  • Thermostatic welding.
  • Overvoltage-undervoltage protection, overcurrent protection.
  • Generator protection (± 15%).
  • The Superior 250 is an electrode welding machine as well as a TIG welding machine with scratch start in direct current (DC).
  • Use it with a wide range of electrode materials such as rutile, cast iron, steel, stainless steel, titanium, copper, nickel, and their alloys.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
TIG, MMA

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
220 A

Welding Current (max): 220


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
25 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
400 V

Supply Voltage: 400


It is the supply voltage that the machine requires from the electrical grid.
Maximum Electrode Diameter
5 mm

Maximum Electrode Diameter: 5


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Weight
8400 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

895,00 €
29,00 €   shipping cost