Dimensions

Type

TIG, MMA, MIG

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

Welding Current (max)

200 A

Welding Current (max): 200

Suitable for professional use on thick metals, such as steel or cast iron constructions.

Operation Cycle (max Ampere)

25 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

Supply Voltage

230 V

Supply Voltage: 230

It is the supply voltage that the machine requires from the electrical grid.

Weight

6000 gr

Additional Features

Inverter

Yes

Inverter

New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.

IGBT

No

VRD

Yes

VRD

It is a voltage reduction device used in welding machines to improve user safety.

with Voltage Stabilizer

No

for Generator with AVR

No

Features

Hot Start

Yes

Hot Start

Temporarily increases the current intensity at the moment of welding initiation.

Anti Stick

Yes

Anti Stick

Cuts off the current if the electrode sticks to the metal, to prevent it from burning.

Arc Force

Yes

Arc Force

Helps in the stability of the arc during welding.

2T Operation

Yes

2T Operation

Press and hold the torch button to start welding. Once you release it, the welding stops.

4T Mode

Yes

4T Mode

Press the button once to start welding and release it. You do not need to keep the button pressed.

Spot Function

Yes

Spot Function

Applies a specific amount of current for a very short duration, creating a spot weld.

Pulsed

Yes

Pulsed

Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.