Skroutz.mt

OSE 80-2 Electric Pulse Sander 200W with Speed Control and with Suction System 429821
Sanders

OSE 80-2 Electric Pulse Sander 200W with Speed Control and with Suction System 429821

The Flex OSE 80-2 orbital sander has a power rating of 200 W and an adjustable no-load speed of 8,000 to 13,000 rpm. Its no-load oscillation rate ranges from 16,000 to 26,000 opm, with a 2 mm orbit...

The Flex OSE 80-2 orbital sander has a power rating of 200 W and an adjustable no-load speed of 8,000 to 13,000 rpm. Its no-load oscillation rate ranges from 16,000 to 26,000 opm, with a 2 mm orbit diameter.

The abrasive is attached with Velcro, and the dust extraction port has a diameter of 27 mm. The package includes an 80 130 mm Velcro pad and a PES...

See full description See full description

Top specs

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    2

    Very fine sanding, sensitive materials, finishing.

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • Weight (Net) 1200 gr
  • See all
159 00 €
Delivery by Tue, 10 Nov
14,00 €   shipping cost
Sent from Greece
From Afoi Paktiti 4.8 (38)
4.8 (38 reviews)
Greece
1 piece
See Power Tools on the page of Afoi Paktiti

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Flex OSE 80-2 orbital sander has a power rating of 200 W and an adjustable no-load speed of 8,000 to 13,000 rpm. Its no-load oscillation rate ranges from 16,000 to 26,000 opm, with a 2 mm orbit diameter.

The abrasive is attached with Velcro, and the dust extraction port has a diameter of 27 mm. The package includes an 80 × 130 mm Velcro pad and a PES microfilter cassette with filter.

  • Power supply: Mains-powered
  • Power: 200 W
  • No-load speed: 8,000–13,000 rpm
  • No-load oscillation rate: 16,000–26,000 opm
  • Orbit diameter: 2 mm
  • Sandpaper dimensions: 130 × 80 mm
  • Abrasive attachment: Velcro
  • Dust extraction system: Yes
  • Vacuum cleaner connection: Yes
  • Dust extraction port diameter: 27 mm
  • Cable length: 4 m
  • Weight: 1.2 kg
  • Package contents: 80 × 130 mm Velcro pad, PES microfilter cassette with filter

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Oscillation Range
2 mm

Oscillation Range: 2

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
1200 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
200 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
-

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Pulses
-

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Sandpaper Dimensions
130x80 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Hard Case
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Flex OSE 80-2 orbital sander has a power rating of 200 W and an adjustable no-load speed of 8,000 to 13,000 rpm. Its no-load oscillation rate ranges from 16,000 to 26,000 opm, with a 2 mm orbit diameter.

The abrasive is attached with Velcro, and the dust extraction port has a diameter of 27 mm. The package includes an 80 × 130 mm Velcro pad and a PES microfilter cassette with filter.

  • Power supply: Mains-powered
  • Power: 200 W
  • No-load speed: 8,000–13,000 rpm
  • No-load oscillation rate: 16,000–26,000 opm
  • Orbit diameter: 2 mm
  • Sandpaper dimensions: 130 × 80 mm
  • Abrasive attachment: Velcro
  • Dust extraction system: Yes
  • Vacuum cleaner connection: Yes
  • Dust extraction port diameter: 27 mm
  • Cable length: 4 m
  • Weight: 1.2 kg
  • Package contents: 80 × 130 mm Velcro pad, PES microfilter cassette with filter

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Oscillation Range
2 mm

Oscillation Range: 2

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
1200 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
200 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
-

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Pulses
-

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Sandpaper Dimensions
130x80 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Hard Case
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

159,00 €
14,00 €   shipping cost
Flex