Skroutz.mt

Kebo Kebo Car and Motorcycle Battery Charger 6/12V
Jump Starters & Battery Chargers

Kebo Kebo Car and Motorcycle Battery Charger 6/12V Code: TC-2420H

  • Input Voltage: 155V-275V AC 50/60Hz
  • Output Voltage: 12V -24V DC (selectable with switch)
  • Charging Voltage: 13.7/27.4V DC up to 95% of battery capacity
  • Charging Current: 20A max up to 80% of battery...
  • Input Voltage: 155V-275V AC 50/60Hz
  • Output Voltage: 12V -24V DC (selectable with switch)
  • Charging Voltage: 13.7/27.4V DC up to 95% of battery capacity
  • Charging Current: 20A max up to 80% of battery capacity
  • Maintenance Current: 1A up to 100% of battery capacity
  • Protection from overheating and overloading
  • Equipped with continuous operation fan
  • Suitable for charging...
See full description See full description

  • Voltage

    6/12

    Suitable for use in older or smaller vehicles with 6 Volt batteries as well as in passenger cars, motorcycles, and small trucks with 12 Volt batteries.

  • Compatible Batteries

    Lead Acid

    Suitable for use in classic types of batteries with liquid electrolyte. Widely used in cars and motorcycles.

    AGM

    Suitable for use with sealed AGM (Absorbent Glass Mat) batteries. Commonly used in modern vehicles and start-stop systems.

    GEL

    Suitable for use in sealed batteries with electrolyte in GEL form. Often used in motorcycles and passenger vehicles.

  • Maximum Charging Current

    Measured in Amperes (A), it determines how quickly the device can "fill" your battery. The higher the number, the faster the charging. For small batteries (e.g. motorcycle) or simple maintenance, a few Amperes are enough, while for faster charging in cars you will need a higher current.
  • See all
Review the product
Product report

Description

Description

  • Input Voltage: 155V-275V AC 50/60Hz
  • Output Voltage: 12V -24V DC (selectable with switch)
  • Charging Voltage: 13.7/27.4V DC up to 95% of battery capacity
  • Charging Current: 20A max up to 80% of battery capacity
  • Maintenance Current: 1A up to 100% of battery capacity
  • Protection from overheating and overloading
  • Equipped with continuous operation fan
  • Suitable for charging 12V-24V (200Ah) lead-acid batteries of types Wet, MF, VRLA, Calcium-Calcium, AGM & Gel
  • Dimensions: 265 x 180 x 105 mm
  • Weight: 1.2 Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
TC-2420H

Dimensions

Type
Chargers

Type

Chargers

It charges your vehicle's battery when it runs out or helps maintain it when the vehicle is not frequently moving. It does not have the ability to directly start the vehicle.
Compatible Batteries
Lead Acid, AGM, GEL

Compatible Batteries

Lead Acid

Suitable for use in classic types of batteries with liquid electrolyte. Widely used in cars and motorcycles.

AGM

Suitable for use with sealed AGM (Absorbent Glass Mat) batteries. Commonly used in modern vehicles and start-stop systems.

GEL

Suitable for use in sealed batteries with electrolyte in GEL form. Often used in motorcycles and passenger vehicles.

Technical Features

Maximum Charging Current
20 A

Maximum Charging Current

Measured in Amperes (A), it determines how quickly the device can "fill" your battery. The higher the number, the faster the charging. For small batteries (e.g. motorcycle) or simple maintenance, a few Amperes are enough, while for faster charging in cars you will need a higher current.
Voltage
6/12 V

Voltage

6/12

Suitable for use in older or smaller vehicles with 6 Volt batteries as well as in passenger cars, motorcycles, and small trucks with 12 Volt batteries.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

  • Input Voltage: 155V-275V AC 50/60Hz
  • Output Voltage: 12V -24V DC (selectable with switch)
  • Charging Voltage: 13.7/27.4V DC up to 95% of battery capacity
  • Charging Current: 20A max up to 80% of battery capacity
  • Maintenance Current: 1A up to 100% of battery capacity
  • Protection from overheating and overloading
  • Equipped with continuous operation fan
  • Suitable for charging 12V-24V (200Ah) lead-acid batteries of types Wet, MF, VRLA, Calcium-Calcium, AGM & Gel
  • Dimensions: 265 x 180 x 105 mm
  • Weight: 1.2 Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
TC-2420H

Dimensions

Type
Chargers

Type

Chargers

It charges your vehicle's battery when it runs out or helps maintain it when the vehicle is not frequently moving. It does not have the ability to directly start the vehicle.
Compatible Batteries
Lead Acid, AGM, GEL

Compatible Batteries

Lead Acid

Suitable for use in classic types of batteries with liquid electrolyte. Widely used in cars and motorcycles.

AGM

Suitable for use with sealed AGM (Absorbent Glass Mat) batteries. Commonly used in modern vehicles and start-stop systems.

GEL

Suitable for use in sealed batteries with electrolyte in GEL form. Often used in motorcycles and passenger vehicles.

Technical Features

Maximum Charging Current
20 A

Maximum Charging Current

Measured in Amperes (A), it determines how quickly the device can "fill" your battery. The higher the number, the faster the charging. For small batteries (e.g. motorcycle) or simple maintenance, a few Amperes are enough, while for faster charging in cars you will need a higher current.
Voltage
6/12 V

Voltage

6/12

Suitable for use in older or smaller vehicles with 6 Volt batteries as well as in passenger cars, motorcycles, and small trucks with 12 Volt batteries.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

96,00 €
14,00 €   shipping cost