Skroutz.mt

PrimaCreator EasyPrint PLA 3D Printer Filament 1.75mm Black 2kg
3D Printer Filament

PrimaCreator EasyPrint PLA 3D Printer Filament 1.75mm Black 2kg Code: PC-EPLA-175-4x0500-STD

EasyPrint PLA is the most innovative PLA material from PrimaCreator. It consists of 100% pure PLA and is slightly softer and more flexible compared to regular PLA, making it ideal for all 3D prints,...

EasyPrint PLA is the most innovative PLA material from PrimaCreator. It consists of 100% pure PLA and is slightly softer and more flexible compared to regular PLA, making it ideal for all 3D prints, including devices with Bowden extruder settings.

Features of EasyPrint PLA:

  • Easy printing with EasyPrint PLA on your 3D printers.
  • Processing in a wide...
See full description See full description

  • Material

    PLA

    Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
  • Weight 2 kg
  • Diameter 1.75 mm
  • See all
The product is not available at Skroutz Last updated: 7 months ago
Product report

Description

Description

EasyPrint PLA is the most innovative PLA material from PrimaCreator. It consists of 100% pure PLA and is slightly softer and more flexible compared to regular PLA, making it ideal for all 3D prints, including devices with Bowden extruder settings.

Features of EasyPrint PLA:

  • Easy printing with EasyPrint PLA on your 3D printers.
  • Processing in a wide temperature range from 185 - 220 °C.
  • Consistent roundness and diameter tolerance within +/- 0.02 mm.
  • EasyPrint PLA comes perfectly wound in a distortion-free spool.
  • Smart filament indicator for consistent and clean visibility.

Printing with EasyPrint PLA is easy due to the minimal shrinkage of the material. The risk of warping is very low during processing in FFF/FDM 3D printers. You can achieve good prints without the need for a heated platform.

The high quality of the material and the absence of additives allow printing in a wide temperature range, with the recommended extruder temperature being 185 - 220 °C.

The perfect winding of EasyPrint ensures that the filament does not tangle, minimizing printing issues even for large 3D prints.

The smart length indicator on each spool of material provides a clear picture of the remaining filament quantity.

EasyPrint PLA is provided in a clean spool, hermetically sealed with desiccants to ensure low moisture content.

EasyPrint PLA has good adhesion to Buildtak, glass platform with glue or spray, and the recommended platform temperature is 40 - 60 °C.

EasyPrint PLA has a stable diameter with low tolerance and is monitored for quality throughout the production process, ensuring a perfect filament with consistent properties in every order.

Technical Data:

  • Material: PLA
  • Diameter: 1.75 mm
  • Tolerance: ± 0.02 mm
  • Requires heated platform: No
  • Printing temperature: 185 - 220 °C
  • Filament weight: 4 x 500g (Total 2 kg)
  • Total length on spool: 170 m +/- 1%
  • Spool size: 180 x 54.5 mm
  • Spool hub diameter: 21mm or 54 mm (adapter included)
  • Weight of empty spool: 122g

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
PC-EPLA-175-4x0500-STD
Material
PLA

Material

PLA

Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
Colour
Black
Diameter
1.75 mm
Weight
2 kg
Filament Packaging
Spool

Filament Packaging

Spool
The filament comes wound on a spool. Ready to use without additional accessories.
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (9)

Reviews

3.5
9
3.5
Review this product
  1. 2
  2. 3
  3. 1
  4. 2
  5. 1
Review this product
  • Τάσος Αθανασιάδης
    2
    0 out of 1 members found this review helpful
    Τάσος Αθανασιάδης
    This review is about weight: 1 kg, quantity: 1 pcs

    In demanding, as for the first layer, prints did not stick to the bed. I have used 5+ kg of Primavalue and Primaselect from the same company and I was satisfied. I don't understand why someone would get the PrimaCreator EasyPrint, let alone at this price. Also, at 220 degrees Celsius (which is OK quite high temperature for PLA, but that's how I print the first layer), it smells and emits smoke from the extruder, from the point where the filament comes out (which obviously my printer doesn't do with other filaments).

    Translated from Greek ·
    Did you find this review helpful?
  • Stavros_Georgiadis58
    1
    0 out of 1 members found this review helpful
    Stavros_Georgiadis58
    This review is about weight: 0.5 kg, filament packaging: -

    The rating refers only to the black color. I have tried many different filaments, but none of them were like this one. It doesn't stick to the printer's bed at all. I tried printing the same test more than 10 times without any success. No matter what settings I tried, this filament failed. Eventually, I decided not to waste my time and throw it away. This doesn't apply to the white and gray filaments from the same company. Stay away from the black one. It's a failure, a waste of time and money.

    Translated from Greek ·
    Did you find this review helpful?
  • Psalidis_Manolis
    5
    Psalidis_Manolis

    Verified purchase

    This review is about colour: Brown, weight: 0.05 kg, filament packaging: Refill, quantity: 1 pcs

    Very good product and its packaging is well-made. Of course, the quantity is also helpful as you can see the color without buying half or a whole kilo and not liking it.

    Translated from Greek ·
    Did you find this review helpful?
  • Darkstar13r
    4
    1 out of 1 members found this review helpful
    Darkstar13r

    Verified purchase

    Good quality plastic. But very expensive for 2 kilograms of PLA. It has broken a few times, destroying some long prints. Overall, it produces a very good result and is easily cleaned from the nozzle (After 1.5 kilograms of plastic usage, it never clogged the nozzle).

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    Misa_1989

    Verified purchase

    This review is about colour: Multicolour, weight: 1 kg

    Very good, I haven't encountered any problem

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    Misa_1989

    Verified purchase

    This review is about colour: Multicolour, weight: 1 kg, quantity: 1 pcs

    Very good, I haven't encountered any problem

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Kostas_Attaliotis

    Verified purchase

    This review is about the colour: Multicolour

    Very good for use with a 3D Pen and they don't smell at all.

    Translated from Greek ·
    Did you find this review helpful?
  • 2
    Iakovos_Daniil
    This review is about colour: Multicolour, weight: 1 kg

    Very bad in printing and expensive ...

    Translated from Greek ·
    Did you find this review helpful?
  • 3
    Lykourgos_Saravanos

    Verified purchase

    This review is about colour: Brown, weight: 0.05 kg, filament packaging: Refill, quantity: 1 pcs

    The price per kilo is very high. Take 1 kg as a very good material

    Translated from Greek ·
    Did you find this review helpful?
  • Τάσος Αθανασιάδης
    2
    Τάσος Αθανασιάδης

    In demanding, as for the first layer, prints did not stick to the bed. I have used 5+ kg of Primavalue and Primaselect from the same company and I was satisfied. I don't understand why someone would get the PrimaCreator EasyPrint, let alone at this price. Also, at 220 degrees Celsius (which is OK quite high temperature for PLA, but that's how I print the first layer), it smells and emits smoke from the extruder, from the point where the filament comes out (which obviously my printer doesn't do with other filaments).

    Translated from Greek ·
    0
  • Stavros_Georgiadis58
    1
    Stavros_Georgiadis58

    The rating refers only to the black color. I have tried many different filaments, but none of them were like this one. It doesn't stick to the printer's bed at all. I tried printing the same test more than 10 times without any success. No matter what settings I tried, this filament failed. Eventually, I decided not to waste my time and throw it away. This doesn't apply to the white and gray filaments from the same company. Stay away from the black one. It's a failure, a waste of time and money.

    Translated from Greek ·
    0
  • Psalidis_Manolis
    5
    Psalidis_Manolis

    Very good product and its packaging is well-made. Of course, the quantity is also helpful as you can see the color without buying half or a whole kilo and not liking it.

    Translated from Greek ·
    0
  • Darkstar13r
    4
    Darkstar13r

    Good quality plastic. But very expensive for 2 kilograms of PLA. It has broken a few times, destroying some long prints. Overall, it produces a very good result and is easily cleaned from the nozzle (After 1.5 kilograms of plastic usage, it never clogged the nozzle).

    Translated from Greek ·
    1
  • 4
    Misa_1989

    Very good, I haven't encountered any problem

    Translated from Greek ·
    0
  • See all

Description & Specifications

EasyPrint PLA is the most innovative PLA material from PrimaCreator. It consists of 100% pure PLA and is slightly softer and more flexible compared to regular PLA, making it ideal for all 3D prints, including devices with Bowden extruder settings.

Features of EasyPrint PLA:

  • Easy printing with EasyPrint PLA on your 3D printers.
  • Processing in a wide temperature range from 185 - 220 °C.
  • Consistent roundness and diameter tolerance within +/- 0.02 mm.
  • EasyPrint PLA comes perfectly wound in a distortion-free spool.
  • Smart filament indicator for consistent and clean visibility.

Printing with EasyPrint PLA is easy due to the minimal shrinkage of the material. The risk of warping is very low during processing in FFF/FDM 3D printers. You can achieve good prints without the need for a heated platform.

The high quality of the material and the absence of additives allow printing in a wide temperature range, with the recommended extruder temperature being 185 - 220 °C.

The perfect winding of EasyPrint ensures that the filament does not tangle, minimizing printing issues even for large 3D prints.

The smart length indicator on each spool of material provides a clear picture of the remaining filament quantity.

EasyPrint PLA is provided in a clean spool, hermetically sealed with desiccants to ensure low moisture content.

EasyPrint PLA has good adhesion to Buildtak, glass platform with glue or spray, and the recommended platform temperature is 40 - 60 °C.

EasyPrint PLA has a stable diameter with low tolerance and is monitored for quality throughout the production process, ensuring a perfect filament with consistent properties in every order.

Technical Data:

  • Material: PLA
  • Diameter: 1.75 mm
  • Tolerance: ± 0.02 mm
  • Requires heated platform: No
  • Printing temperature: 185 - 220 °C
  • Filament weight: 4 x 500g (Total 2 kg)
  • Total length on spool: 170 m +/- 1%
  • Spool size: 180 x 54.5 mm
  • Spool hub diameter: 21mm or 54 mm (adapter included)
  • Weight of empty spool: 122g

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
PC-EPLA-175-4x0500-STD
Material
PLA

Material

PLA

Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
Colour
Black
Diameter
1.75 mm
Weight
2 kg
Filament Packaging
Spool

Filament Packaging

Spool
The filament comes wound on a spool. Ready to use without additional accessories.
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (9)

3.5
9
3.5
Review this product
  1. 2
  2. 3
  3. 1
  4. 2
  5. 1
Review this product
  • Τάσος Αθανασιάδης
    2
    0 out of 1 members found this review helpful
    Τάσος Αθανασιάδης
    This review is about weight: 1 kg, quantity: 1 pcs

    In demanding, as for the first layer, prints did not stick to the bed. I have used 5+ kg of Primavalue and Primaselect from the same company and I was satisfied. I don't understand why someone would get the PrimaCreator EasyPrint, let alone at this price. Also, at 220 degrees Celsius (which is OK quite high temperature for PLA, but that's how I print the first layer), it smells and emits smoke from the extruder, from the point where the filament comes out (which obviously my printer doesn't do with other filaments).

    Translated from Greek ·
    Did you find this review helpful?
  • Stavros_Georgiadis58
    1
    0 out of 1 members found this review helpful
    Stavros_Georgiadis58
    This review is about weight: 0.5 kg, filament packaging: -

    The rating refers only to the black color. I have tried many different filaments, but none of them were like this one. It doesn't stick to the printer's bed at all. I tried printing the same test more than 10 times without any success. No matter what settings I tried, this filament failed. Eventually, I decided not to waste my time and throw it away. This doesn't apply to the white and gray filaments from the same company. Stay away from the black one. It's a failure, a waste of time and money.

    Translated from Greek ·
    Did you find this review helpful?
  • Psalidis_Manolis
    5
    Psalidis_Manolis

    Verified purchase

    This review is about colour: Brown, weight: 0.05 kg, filament packaging: Refill, quantity: 1 pcs

    Very good product and its packaging is well-made. Of course, the quantity is also helpful as you can see the color without buying half or a whole kilo and not liking it.

    Translated from Greek ·
    Did you find this review helpful?
  • Darkstar13r
    4
    1 out of 1 members found this review helpful
    Darkstar13r

    Verified purchase

    Good quality plastic. But very expensive for 2 kilograms of PLA. It has broken a few times, destroying some long prints. Overall, it produces a very good result and is easily cleaned from the nozzle (After 1.5 kilograms of plastic usage, it never clogged the nozzle).

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    Misa_1989

    Verified purchase

    This review is about colour: Multicolour, weight: 1 kg

    Very good, I haven't encountered any problem

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    Misa_1989

    Verified purchase

    This review is about colour: Multicolour, weight: 1 kg, quantity: 1 pcs

    Very good, I haven't encountered any problem

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Kostas_Attaliotis

    Verified purchase

    This review is about the colour: Multicolour

    Very good for use with a 3D Pen and they don't smell at all.

    Translated from Greek ·
    Did you find this review helpful?
  • 2
    Iakovos_Daniil
    This review is about colour: Multicolour, weight: 1 kg

    Very bad in printing and expensive ...

    Translated from Greek ·
    Did you find this review helpful?
  • 3
    Lykourgos_Saravanos

    Verified purchase

    This review is about colour: Brown, weight: 0.05 kg, filament packaging: Refill, quantity: 1 pcs

    The price per kilo is very high. Take 1 kg as a very good material

    Translated from Greek ·
    Did you find this review helpful?
  • Τάσος Αθανασιάδης
    2
    Τάσος Αθανασιάδης

    In demanding, as for the first layer, prints did not stick to the bed. I have used 5+ kg of Primavalue and Primaselect from the same company and I was satisfied. I don't understand why someone would get the PrimaCreator EasyPrint, let alone at this price. Also, at 220 degrees Celsius (which is OK quite high temperature for PLA, but that's how I print the first layer), it smells and emits smoke from the extruder, from the point where the filament comes out (which obviously my printer doesn't do with other filaments).

    Translated from Greek ·
    0
  • Stavros_Georgiadis58
    1
    Stavros_Georgiadis58

    The rating refers only to the black color. I have tried many different filaments, but none of them were like this one. It doesn't stick to the printer's bed at all. I tried printing the same test more than 10 times without any success. No matter what settings I tried, this filament failed. Eventually, I decided not to waste my time and throw it away. This doesn't apply to the white and gray filaments from the same company. Stay away from the black one. It's a failure, a waste of time and money.

    Translated from Greek ·
    0
  • Psalidis_Manolis
    5
    Psalidis_Manolis

    Very good product and its packaging is well-made. Of course, the quantity is also helpful as you can see the color without buying half or a whole kilo and not liking it.

    Translated from Greek ·
    0
  • Darkstar13r
    4
    Darkstar13r

    Good quality plastic. But very expensive for 2 kilograms of PLA. It has broken a few times, destroying some long prints. Overall, it produces a very good result and is easily cleaned from the nozzle (After 1.5 kilograms of plastic usage, it never clogged the nozzle).

    Translated from Greek ·
    1
  • 4
    Misa_1989

    Very good, I haven't encountered any problem

    Translated from Greek ·
    0
  • See all