The best performance and connection quality for your network.

• 10GBit Ethernet
• Transmission frequency: 1200 MHz
• Permanent link certification
• PoE Power over Ethernet support
• Outer jacket: PE, inner jacket Eca CPR class
• Physical properties: Conductor: bare copper wire AWG 23/1
• Insulation: SFS-PO
• Number of total insulated conductors: 8, twisted in 4 pairs
• Color code: blue-white, orange-white, green-white, brown-white
• Pair shielding: aluminum-coated polyester foil, 100% coverage
• Common shield: 50% braid coverage
• Outer sheath: Polyethylene
• Outer casing thickness: 0.50 mm nominal
• Color: Black (RAL 9005)
• Mechanical properties:
• Tensile load: 150 N max.
• Dynamic bending radius: 8x AD mm min.
• Static bending radius: 4x AD mm min.
• Temperature range during transport and storage: -20 °C to +60 °C
• Operating temperature range: -50 °C to +60 °C
• Temperature range during installation: 0 °C to +60 °C
• Total diameter: 8.5 mm nominal
• Weight: 66.5/km
• Electrical properties:
• Average resistance: 100±5 ohms at 1–600 MHz
• Capacity: 40 pF/m nominal @ 1 KHz
• Capacity imbalance (pair – ground): 1.6 pF/m max @ 1 kHz
• Insulation resistance: 5 gigaohm x km min.
• Fire load: 650 MJ/m
• Loop resistance: 147 ohms/km max (2% max resistance imbalance)
• Operating voltage: 72 V DC max
• Insertion loss: Grade 1 (CA-Type 1b)
• Phase delay: 450 nS/100 m max.
• Signal transmission delay: 15 nS/100 m max
• Distribution category: "d" according to EN 50174-2
• NVP: 79%
• Type: Patchcord
• Length: 100m