Skroutz.mt

ORE 150-5 Electric Eccentric Sander 150mm Electric 350W with Suction System 379468
Sanders

ORE 150-5 Electric Eccentric Sander 150mm Electric 350W with Suction System 379468

The Flex ORE 150-5 random orbital sander operates at a rated power of 350 W and has a 150 mm hook-and-loop backing pad. Its 5 mm orbit and no-load speed of 5,800–10,000 rpm support sanding a range of...

The Flex ORE 150-5 random orbital sander operates at a rated power of 350 W and has a 150 mm hook-and-loop backing pad. Its 5 mm orbit and no-load speed of 5,800–10,000 rpm support sanding a range of materials and applications. The PES microfilter cartridge works with a cyclone system to extract dust.

The hook-and-loop backing pad is used with 15-hole...

See full description See full description

Top specs

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    5

    Fast material removal, more aggressive sanding.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • Weight (Net) 2100 gr
  • See all
299 00 €
Delivery by Tue, 10 Nov
14,00 €   shipping cost
Sent from Greece
From Chiliotis Shop 5.0 (5)
5.0 (5 reviews)
Greece
1 piece
See Power Tools on the page of Chiliotis Shop

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Flex ORE 150-5 random orbital sander operates at a rated power of 350 W and has a 150 mm hook-and-loop backing pad. Its 5 mm orbit and no-load speed of 5,800–10,000 rpm support sanding a range of materials and applications. The PES microfilter cartridge works with a cyclone system to extract dust.

The hook-and-loop backing pad is used with 15-hole sanding discs for dust extraction. The filter cartridge allows dust to be emptied and the filter to be cleaned.

  • Power supply: Mains
  • Power: 350 W
  • Backing pad diameter: 150 mm
  • No-load speed: 5,800–10,000 rpm
  • No-load orbit rate: 11,600–20,000 opm
  • Orbit diameter: 5 mm
  • Abrasive attachment: Hook-and-loop
  • Sanding disc holes: 15
  • Dust extraction system: PES microfilter cartridge with cyclone function
  • Dust extraction connection diameter: 27 mm
  • Cable length: 4 m
  • Weight: 2.1 kg
  • Package contents: Hard hook-and-loop backing pad, PES microfilter cartridge with filter, SW 5 Allen key

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
5 mm

Eccentricity: 5

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Fast material removal, more aggressive sanding.
Net Weight
2100 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
350 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
10000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Pulses
-

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
150 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Flex ORE 150-5 random orbital sander operates at a rated power of 350 W and has a 150 mm hook-and-loop backing pad. Its 5 mm orbit and no-load speed of 5,800–10,000 rpm support sanding a range of materials and applications. The PES microfilter cartridge works with a cyclone system to extract dust.

The hook-and-loop backing pad is used with 15-hole sanding discs for dust extraction. The filter cartridge allows dust to be emptied and the filter to be cleaned.

  • Power supply: Mains
  • Power: 350 W
  • Backing pad diameter: 150 mm
  • No-load speed: 5,800–10,000 rpm
  • No-load orbit rate: 11,600–20,000 opm
  • Orbit diameter: 5 mm
  • Abrasive attachment: Hook-and-loop
  • Sanding disc holes: 15
  • Dust extraction system: PES microfilter cartridge with cyclone function
  • Dust extraction connection diameter: 27 mm
  • Cable length: 4 m
  • Weight: 2.1 kg
  • Package contents: Hard hook-and-loop backing pad, PES microfilter cartridge with filter, SW 5 Allen key

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
5 mm

Eccentricity: 5

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Fast material removal, more aggressive sanding.
Net Weight
2100 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
350 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
10000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Pulses
-

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
150 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

299,00 €
14,00 €   shipping cost
Flex