Skroutz.mt

Uni-T Digital Clamp Meter 1000A AC UT205 Maximum Jaw Opening 40mm
Clamp Meters

Uni-T Digital Clamp Meter 1000A AC UT205 Maximum Jaw Opening 40mm

The Uni-T UT205 digital clamp meter measures AC current up to 1000 A and AC and DC voltage up to 600 V. Its jaw opens up to 40 mm, and the device measures capacitor capacitance and resistance. It also...

The Uni-T UT205 digital clamp meter measures AC current up to 1000 A and AC and DC voltage up to 600 V. Its jaw opens up to 40 mm, and the device measures capacitor capacitance and resistance. It also supports audible continuity and diode testing.

The LCD has a backlight and a relative value indicator. Auto Range automatically selects the measurement range,...

See Description & Specifications See Description & Specifications
58 67 €
Delivery Mon, 09 Nov - Fri, 13 Nov
14,00 €   shipping cost
Sent from Greece
From Plus3 4.0 (61)
4.0 (61 reviews)
Greece
2 pieces
See Multimeters on the page of Plus3

Learn more about invoicing
Review the product
Product report

Description & Specifications

The Uni-T UT205 digital clamp meter measures AC current up to 1000 A and AC and DC voltage up to 600 V. Its jaw opens up to 40 mm, and the device measures capacitor capacitance and resistance. It also supports audible continuity and diode testing.

The LCD has a backlight and a relative value indicator. Auto Range automatically selects the measurement range, and the clamp meter switches off automatically.

  • Display: Digital
  • AC current: 400 A and 1000 A
  • DC voltage: 400 mV, 4 V, 40 V, 400 V and 600 V
  • AC voltage: 4 V, 40 V, 400 V and 600 V
  • Resistance: 400 Ω, 4 kΩ, 40 kΩ, 400 kΩ, 4 MΩ and 40 MΩ
  • Capacitance: 40 nF, 400 nF, 4 μF, 40 μF and 100 μF
  • Frequency: 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz and 10 MHz
  • Duty cycle: 0.1%–99.9%
  • Maximum jaw opening: 40 mm
  • Test leads: Yes
  • Testing: Audible continuity and diodes
  • Display: Backlit LCD with relative value indicator
  • Range selection: Automatic
  • Automatic power-off: Yes

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Maximum Jaw Opening
40 mm

Maximum Jaw Opening

The maximum cable or conductor diameter that the clamp can grip in order to perform a measurement.
with Test Leads
Yes

with Test Leads


It has measurement terminals that have a red wire for positive and a black wire for negative.
AC Current
1000 A
Indication
Digital
Bluetooth
No
ISO/NIST Calibration Certificate
No

Features & Functions

Inrush Current
-

Inrush Current

Ability to record the instantaneous inrush current (duration ~100ms) absorbed by electric motors, motor-driven devices, and compressors during their momentary startup.
True RMS
No
NCV
No
LoZ (Low Impedance / Low Impedance)
-

LoZ (Low Impedance / Low Impedance)

Low impedance function that absorbs induced/parasitic voltages ("phantom" voltages or ghost voltages) from adjacent cables, ensuring that you measure only the actual line voltage.
VFD Mode / LPF (Low Pass Filter)
-

VFD Mode / LPF (Low Pass Filter)

Integrated low-pass filter that cuts off high-frequency harmonic noise (PWM) produced by variable speed drives, allowing accurate voltage and frequency measurement in Inverters.
Temperature Measurement
-

Temperature Measurement

Ability to measure temperature via a connected thermocouple (Type-K terminal), allowing temperature monitoring of pipes, refrigerants, and HVAC components.
Capacitor Capacitance Measurement
Yes

Capacitor Capacitance Measurement

Ability to test and measure capacitor capacitance, allowing the immediate diagnosis of worn starting capacitors in motors, pumps, and compressors.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

58,67 €
14,00 €   shipping cost