Skroutz.mt

Festool ETS 150/3 EQ Electric Eccentric Sander 150mm Electric 310W with Speed Control and with Suction System 575023
Sanders

Festool ETS 150/3 EQ Electric Eccentric Sander 150mm Electric 310W with Speed Control and with Suction System 575023

ETS 150/3 EQ (with turbofilter) Random Orbital Sander 310 W

Description

  • Perfect finishing sander in the mid-range category.
  • Excellent grip for both left-handed and right-handed users.
  • Ideal for...

ETS 150/3 EQ (with turbofilter) Random Orbital Sander 310 W

Description

  • Perfect finishing sander in the mid-range category.
  • Excellent grip for both left-handed and right-handed users.
  • Ideal for overhead use.
  • Removable cable - one cable works with all Festool power tools.
  • Vacuum attachment for clean work.
  • JETstream specially designed sanding pad with special...
See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    3

    General sanding, finishing of wood or paint.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Weight (Net) 1800 gr
  • See all
Review the product
Product report

Description

Description

ETS 150/3 EQ (with turbofilter) Random Orbital Sander 310 W

Description

  • Perfect finishing sander in the mid-range category.
  • Excellent grip for both left-handed and right-handed users.
  • Ideal for overhead use.
  • Removable cable - one cable works with all Festool power tools.
  • Vacuum attachment for clean work.
  • JETstream specially designed sanding pad with special slots for perfect suction results.
  • Sticfix - pad with self-adhesive (HOOKIT) sandpaper bonding surface.
  • Easy handling thanks to the non-slip handle.
  • Gradual speed selection.
  • Zero vibration balancing system.
  • High-quality finish thanks to the 3mm eccentric motion.
  • Ideal for pre-sanding before polishing.
  • Final surface sanding.
  • Sanding and polishing on mineral materials.
  • Vacuum connection nozzle 27 mm.

Specifications

  • Power: 310 W.
  • Operating voltage: 230V / 50Hz.
  • Rotations per minute (rpm): 4000 - 10000 min⁻¹
  • Eccentric motion: 3mm.
  • Diameter of circular pad: 150 mm.
  • Weight: 1.8 kg.

Included

  • StickFix Pad D150mm FUSION - TEC (extra soft)
  • Long-life dust collection bag
  • Cardboard box.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
310 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Eccentricity
3 mm

Eccentricity: 3

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


General sanding, finishing of wood or paint.
Vibration (m/s²)
4.7
Net Weight
1800 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
10000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
72 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Diameter
150 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

ETS 150/3 EQ (with turbofilter) Random Orbital Sander 310 W

Description

  • Perfect finishing sander in the mid-range category.
  • Excellent grip for both left-handed and right-handed users.
  • Ideal for overhead use.
  • Removable cable - one cable works with all Festool power tools.
  • Vacuum attachment for clean work.
  • JETstream specially designed sanding pad with special slots for perfect suction results.
  • Sticfix - pad with self-adhesive (HOOKIT) sandpaper bonding surface.
  • Easy handling thanks to the non-slip handle.
  • Gradual speed selection.
  • Zero vibration balancing system.
  • High-quality finish thanks to the 3mm eccentric motion.
  • Ideal for pre-sanding before polishing.
  • Final surface sanding.
  • Sanding and polishing on mineral materials.
  • Vacuum connection nozzle 27 mm.

Specifications

  • Power: 310 W.
  • Operating voltage: 230V / 50Hz.
  • Rotations per minute (rpm): 4000 - 10000 min⁻¹
  • Eccentric motion: 3mm.
  • Diameter of circular pad: 150 mm.
  • Weight: 1.8 kg.

Included

  • StickFix Pad D150mm FUSION - TEC (extra soft)
  • Long-life dust collection bag
  • Cardboard box.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
310 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Eccentricity
3 mm

Eccentricity: 3

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


General sanding, finishing of wood or paint.
Vibration (m/s²)
4.7
Net Weight
1800 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
10000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
72 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Diameter
150 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

550,00 €
14,00 €   shipping cost